LC_D29V_ZZD/app/ble.c

#include "includes.h"


const char BLE_BASE_01[4]={0x01,0xE0,0xFC,0x01};
const char BLE_BASE_02[4]={0x01,0xE0,0xFC,0x02};

const char Ble_IO2AT[5]={0x01,0xE0,0xFC,0x01,0xDB}; //03 succ   4 faile
const char Ble_AT_ASK[]={0x04,0x0e}; //单个字节 0x01

const char Ble_CLEAR_LIST[5]={0x01,0xE0,0xFC,0x01,0xA3}; 




const char BLE_BREAK_BASECONNECT_ASK[]={0x01,0xe0,0xfc,0x01,0xdc}; 
const char BLE_AUDCONNECT_ASK[]={0x01,0xe0,0xfc,0x01,0xde};
const char BLE_BREAK_AUDCONNECT_ASK[]={0x01,0xe0,0xfc,0x01,0xdf};




Sut_BLE Sut_ble;


static LSAPI_Device_t * BT_POWER_Gpio = NULL;
static LSAPI_Device_t * BT_CTL_Gpio = NULL;
static LSAPI_Device_t * BLE_CTL_Gpio = NULL;


#define BT_POWER_ID 21
#define BT_CTL_ID 	5   //5
#define BLE_CTL_ID  4

#define BlE_TIMER_TICK 10



void gpioBleConfigOutput(void){

	bool write_value = false;
	LSAPI_GpioConfig_t gpioConfig = {0};
    gpioConfig.mode = LS_GPIO_OUTPUT;
	gpioConfig.out_level=true;
	
	gpioConfig.id = BT_POWER_ID;
    BT_POWER_Gpio = LSAPI_Device_GPIOCreate(&gpioConfig);
	gpioConfig.id = BT_CTL_ID;
  	BT_CTL_Gpio = LSAPI_Device_GPIOCreate(&gpioConfig);
	gpioConfig.id = BLE_CTL_ID;
  	BLE_CTL_Gpio = LSAPI_Device_GPIOCreate(&gpioConfig);
	LSAPI_Device_Open(BT_POWER_Gpio);
	LSAPI_Device_Write(BT_POWER_Gpio, (void *)&write_value, 1);
	LSAPI_Device_Open(BT_CTL_Gpio);
	LSAPI_Device_Write(BT_CTL_Gpio, (void *)&write_value, 1);
	LSAPI_Device_Open(BLE_CTL_Gpio);
	LSAPI_Device_Write(BLE_CTL_Gpio, (void *)&write_value, 1);

}


LSAPI_OSI_Thread_t *threadid_Ble=NULL;

LSAPI_OSI_Timer_t *BleTimer_t=NULL;

void bleCb(void *param){
	static bool fanzhuan=true;
	bool lastValue=false;
	static short MC_cnt=0;
	if(Sut_ble.BleRingInit){
			fanzhuan=!fanzhuan;
			LSAPI_Device_Write(BLE_CTL_Gpio, (void *)&fanzhuan, 1);
			//MSG_INFO(1,"BLE_CTL_Gpio fanzhuan=%d",fanzhuan);
			LSAPI_OSI_TimerStart(BleTimer_t,BlE_TIMER_TICK);
			if(MC_cnt++>6000/BlE_TIMER_TICK){
				Sut_ble.BleRingInit=0;
				LSAPI_Device_Write(BLE_CTL_Gpio, (void *)&lastValue, 1);
				MSG_INFO(1,"BLE_CTL_Gpio Over set high=%d",fanzhuan);
				MC_cnt=0;
				//LSAPI_OSI_ThreadExit();
				//LSAPI_OSI_ThreadDelete();
			}
				
	}
}



void BLETimerEntry(void *param)
{

   if(NULL == BleTimer_t) BleTimer_t = LSAPI_OSI_TimerCreate(LSAPI_OSI_ThreadCurrent(), bleCb, NULL);
	if(NULL == BleTimer_t) MSG_WARN(1,"ble timer init failed");
	LSAPI_OSI_Event_t event = {};
	
    for(;;)
   {
        LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &event);
		LSAPI_OSI_TimerStart(BleTimer_t,BlE_TIMER_TICK);
    }
}

void Send_BLE_EVEN(){
	if(threadid_Ble!=NULL){
			Sut_ble.BleRingInit=1;
			threadSendEvent(threadid_Ble,OHPOC_EVENT_BLERING,NULL,NULL,NULL);
		}

}
void start_ringClearList(){
	//Sut_ble.BleRingInit=1;

	if(NULL==threadid_Ble)	threadid_Ble=LSAPI_OSI_ThreadCreate("bletimer", BLETimerEntry,NULL,LSAPI_OSI_PRIORITY_NORMAL,1024,4);
	if(NULL==threadid_Ble){
			MSG_WARN(1,"create thread failed");
	}
}



void BLE_Open(){
	bool write_value = true;
	char write_low=false;	
//	if(threadid_Bletimer==0)MSG_WARN(1,"create threadid_Bletimer  fail");
//	Ble_Info.BleRingInit=1;
//	LSAPI_OSI_TimerStart(BleTimer_t,BlE_TIMER_TICK);
	LSAPI_Device_Write(BT_CTL_Gpio, (void *)&write_value, 1); //需要先置高
	LSAPI_Device_Write(BT_POWER_Gpio, (void *)&write_value, 1);
	LSAPI_Device_Write(BLE_CTL_Gpio, (void *)&write_low, 1);//正常为低		

	
}

void BT_Match_IOctr(bool ctr){//
	bool write_value;
	write_value=ctr;
	LSAPI_Device_Write(BT_CTL_Gpio, (void *)&write_value, 1);//正常为低
	if(write_value)MSG_INFO(1,"=====SET HIGH");
	else MSG_INFO(1,"=====SET LOW");

}
void Ble_Match_IOCTR(bool ctr){//
	bool write_value=true ;
	write_value=ctr;
	LSAPI_Device_Write(BLE_CTL_Gpio, (void *)&write_value, 1);//正常为低
	if(write_value)MSG_INFO(1,"BLE_CTR=====SET HIGH");
	else MSG_INFO(1,"BLE_CTR=====SET LOW");
}


void BLE_Close(){
	bool write_value = false;
	LSAPI_Device_Write(BT_POWER_Gpio, (void *)&write_value, 1);
	LSAPI_Device_Write(BT_CTL_Gpio, (void *)&write_value, 1);
	LSAPI_Device_Write(BLE_CTL_Gpio, (void *)&write_value, 1);
}


void BLE_at_process(char *r_buffer,int read_size){
	
	if(memcmp(r_buffer,Ble_AT_ASK,sizeof(Ble_AT_ASK)))return;	
	newPara.BleEnable=1;
	
	MSG_INFO(1,"Ble_result===%02x",r_buffer[read_size-1]);
	switch(r_buffer[read_size-1]){
		
		case BLE_PTT_PRESS:
				//澶勫湪 鎸囩幆閰嶅�搴旇�鍛婄煡鎸囩幆閰嶅�鎴愬姛
				if(sutUIstatus.Status==UIS_MENU_RING_MATCH){
					sutApp.ringlink=1;
				}else micPttHandler(1);
				
				break;
			case BLE_PTT_FREE:
				micPttHandler(0);
				break;
			case BLE_CONNECT_SUC:
				Sut_ble.Base_Conected=1;
				
				break;
				
			case BLE_CONNECT_FAIL:
				 Sut_ble.Base_Conected=0;
				  Sut_ble.Audio_Conected=0;
				 ModemSendAt("AT+AUDCH=0,0\r\n");
				break;
			case BLE_AUDCONNECT_SUC:
				Sut_ble.Audio_Conected=1;
				Ble_SendATCMD(BLE_BASE_02,sizeof(BLE_BASE_02),BLE_SETSPK_SUC,newPara.BleSpkLv*10);
				LSAPI_OSI_ThreadSleep(200);
				Ble_SendATCMD(BLE_BASE_02,sizeof(BLE_BASE_02),BLE_SETMIC_SUC,newPara.BleMicLv);
				ModemSendAt("AT+AUDCH=1,3\r\n");
				break;
				
			case BLE_BREAK_AUDCONNECT_SUC:
				 Sut_ble.Audio_Conected=0;
				break;
				
			case BLE_SETMIC_SUC:
				
				break;
			case BLE_SETSPK_SUC:
				
				break;

	}

}



void Ble_handler(unsigned int interval){
	static unsigned short cnt=0,lcnt=0;

	if(sutPocStatus.mic)return;//璇烽害鏃跺€欎笉鎵�弿锛岃�閬垮紩鍏ユ潅闊�
	if(!newPara.BleEnable)return;
	if(Sut_ble.Base_Conected&&Sut_ble.Audio_Conected)return;
	if(++cnt<(1000/interval)) return;//1秒读一次ADC即可
	cnt=0;	
	if(++lcnt<2)return;
	lcnt=0;
	if(Sut_ble.Base_Conected==0){
		Ble_SendAT(Ble_IO2AT,sizeof(Ble_IO2AT));
		return;
	}
	if(Sut_ble.Audio_Conected==0){
		Ble_SendAT(BLE_AUDCONNECT_ASK,sizeof(BLE_AUDCONNECT_ASK));
		return;
	}
}

void Ble_SendATCMD(char * data, int len,BLE_Result cmd,char value){

	char buf[6]={0};
	char tmp[3]={0};
	char Tbuf[30]={0};
	char  i=0;

	memcpy(buf,data,len);

	 buf[4]=cmd;
	 buf[5]=value;

	for(i=0;i<len+2;i++){

		snprintf(tmp, sizeof(tmp),"%02x",buf[i]);
		strcat(Tbuf, tmp);

	}

	MSG_INFO(1,"Tbuf===%s",Tbuf);
	 
	Ble_SendAT(buf,sizeof(buf));

}