LC_D29V_ZZD/hpocapp.c

/* Copyright (C) 2018 RDA Technologies Limited and/or its affiliates("RDA").
 * All rights reserved.
 *
 * This software is supplied "AS IS" without any warranties.
 * RDA assumes no responsibility or liability for the use of the software,
 * conveys no license or title under any patent, copyright, or mask work
 * right to the product. RDA reserves the right to make changes in the
 * software without notification.  RDA also make no representation or
 * warranty that such application will be suitable for the specified use
 * without further testing or modification.
 */

//#define OSI_LOG_TAG OSI_MAKE_LOG_TAG()

#include "includes.h"
/*
appimg_exit
仅在程序退出时打印
*/
void appimg_exit(void){
    LSAPI_Log_Debug("application image exit");
}


#define HANDSET_THREAD_STACK 4*1024

void handsetStatusOutput(unsigned char status){

 char info[30];
 
 snprintf(info,sizeof(info),"+HEADSET:%d\r\n",status);
 MSG_INFO(0,"%s",info);
 
 //outterInfo(info, strlen(info));

 switch(status){
	 case 0://HEADSET CONNECT

		 sutApp.earLev=0;
		// msgAtSend("AT+AUDCH=0,0\r\n");
		 sutApp.pcant=4;
		 break;//HEADSET DISCONNECTED
		 
	 case 1:
		 sutApp.earLev=1;
		// msgAtSend("AT+AUDCH=1,3\r\n");
		 sutApp.pcant=2;

		 break;//HEADSET BTN PRESS
	 case 2:
		 micPttHandler(1);
		 break;//HEADSET BTN RELEASED
	 case 3:
		 micPttHandler(0);
		 break;
 }
}


void prvHeadSetDetectCallback(void *ctx, LSAPI_HeadSetDetectId_t id, uint32_t param)
{
    MSG_INFO(1,"prvHeadSetDetectCallback_t(id:%d,param:%d)",id, param);

    switch(id){
        case LSAPI_HEADSET_PLUGIN:
            MSG_INFO(1,"--->>headset plugin");
           handsetStatusOutput(0);
            break;
            
        case LSAPI_HEADSET_PLUGOUT:
        	 MSG_INFO(1,"--->>headset plugout");
		 
       		handsetStatusOutput(1);
            break;

        case LSAPI_HEADSET_BTN_DOWN:
         MSG_INFO(1,"--->>headset btn_dwon(volt:%dmV)",param);
         handsetStatusOutput(2);
          break;

        case LSAPI_HEADSET_BTN_UP:
         MSG_INFO(1,"--->>headset btn_up(volt:%dmV)",param);
		 
         handsetStatusOutput(3);
            break; 
			
        default:
            break;
    }
}

void handSetThread(void *param){

 LSAPI_OSI_Event_t waitevent;
 LSAPI_HeadSetStatus_t status;
 static unsigned char FristHeadDet=0;
 MSG_INFO(1,"handSetThread start");

  switch (FristHeadDet)
	 {
	 case 0:

	 status= LSAPI_Device_HeadSetGetStatus();//0628 首次需要用户判定
	 
	   if(status == LSAPI_HEADSET_DISCONNECT)
	   {
		  // MSG_INFO(1,"headset_disconnect");	
		   handsetStatusOutput(1);
	   }
	   else if(status == LSAPI_HEADSET_CONNECT)
	   {
		   //MSG_INFO(1," headset_connect");
		   handsetStatusOutput(0);
	   }
	   else
	   {
		   //MSG_INFO(1,"unknow state");
	   }
		FristHeadDet=1;
	 	break;
	 }


 if(LSAPI_Device_HeadSetSetDetectCB(prvHeadSetDetectCallback)) MSG_INFO(1,"Handset cb ok");
 else MSG_INFO(1,"Handset cb failed!!!");
 
    for(;;){
     LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &waitevent);
    }
}

void handSetInit(void){
 if(NULL==LSAPI_OSI_ThreadCreate("handset", handSetThread, NULL, LSAPI_OSI_PRIORITY_NORMAL, HANDSET_THREAD_STACK, 4)) MSG_INFO(1,"handset thread failed");
}


//LSAPI_AUD_CusToneV2

/*! \brief This function is used to player custom tone V2
*
*   \param[in] low_freq     tone lower frequecy, range in [1, 9000]
*
*   \param[in] high_freq    tone high frequecy, range in [1, 9000]
*
*   \param[in] duration     tone duration, uint: millisecond, [100,1000].
*
*   \param[in] gain    see:LSAPI_AUD_CusToneGain_t
*
*   \param[in] silence    tone silence, uint: millisecond,[0,100].
*
*
*   \return  enum: LSAPI_Status_t
*/
	//LSAPI_AUD_CusToneGain_t
	

LSAPI_OSI_Thread_t * ToneThreadPtr=NULL;


void ToneThread(void *param){
	LSAPI_OSI_Event_t waitevent;	
	   for(;;){
		LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &waitevent);
	   		if(sutPocStatus.mic==1||sutPocStatus.spk==1)continue;   
		    MSG_INFO(1, "TONE satrt");
			msgAtSend("AT+POC=4C00000001037003700150\r\n");	
	   }
	   
}

void ToneInit(void){
	ToneThreadPtr=LSAPI_OSI_ThreadCreate("tonedet", ToneThread, NULL, LSAPI_OSI_PRIORITY_NORMAL, HANDSET_THREAD_STACK, 4);
	if(ToneThreadPtr==NULL)MSG_INFO(1,"tone thread failed");
}

void startSubTask(void);

void startSubTask(void){
	if(NULL==LSAPI_OSI_ThreadCreate("sub", subTask, NULL, LSAPI_OSI_PRIORITY_NORMAL, SUB_TASK_THREAD_STACK, 10)){
		MSG_ERR(1, "sub task failed");
	}else MSG_ERR(1, "sub task ok");
}



static void mainTask(void *param){
	//LSAPI_OSI_ThreadSleep(5000);	
	handSetInit();
	ToneInit();
	dataInit();
	boardInit();
	startSubTask();//线程会调用外设接口，必须在boardInit后启动
  	appRun();//应用主程序(pt)	
	
}
/*
appimg_enter
cat one入口函数
*/
LSAPI_OSI_Thread_t * mainThreadPtr=NULL;
int appimg_enter(void *param){
	
   if(NULL==(mainThreadPtr=LSAPI_OSI_ThreadCreate("main", mainTask, NULL, LSAPI_OSI_PRIORITY_NORMAL, PT_THREAD_STACK, 5))){
		for(;;){
			
			LSAPI_Log_Debug("main task failed");
			LSAPI_OSI_ThreadSleep(1000);
		}
	}


    return 0;
}