LC_D29V_ZZD/app/uiBlock.c

#include "includes.h"
/****************************状态栏显示部分开始***********************************/

//显示信号强度
static void ShowSingle(int CSQ){
	unsigned short x=SIGNAL_ICON_X;
	unsigned short y=3;
	if(sutApp.pocPpp == 0) guiShowBmp(x,y,"/ext/prepack/Single.bmp");
	else guiShowBmp(x,y,"/ext/prepack/SingleOK.bmp");
	//11 3格
	x += 10;
	if(CSQ<5 || CSQ==99){
		guiClearRect(x,y+1,x+14,y+17,COLOR_STATUS_BAR);
	}else if(CSQ<11){
		guiDrawVLine(x+2,y+16,x,y,guiGetBackColor());
		guiClearRect(x+4,y+1,x+14,y+17,COLOR_STATUS_BAR);
	}else if(CSQ<18){
		guiDrawVLine(x+2,y+16,x,y,guiGetBackColor());
		guiDrawVLine(x,y+16,x+4,y,guiGetBackColor());
		guiClearRect(x+8,y+1,x+14,y+17,COLOR_STATUS_BAR);
	}else if(CSQ<22){
		guiDrawVLine(x+2,y+16,x,y,guiGetBackColor());
		guiDrawVLine(x,y+16,x+4,y,guiGetBackColor());
		guiDrawVLine(x-2,y+16,x+8,y,guiGetBackColor());
		guiClearRect(x+11,y+1,x+14,y+17,COLOR_STATUS_BAR);
	}else{
		guiDrawVLine(x+2,y+16,x,y,guiGetBackColor());
		guiDrawVLine(x,y+16,x+4,y,guiGetBackColor());
		guiDrawVLine(x-2,y+16,x+8,y,guiGetBackColor());
		guiDrawVLine(x-4,y+16,x+12,y,guiGetBackColor());	
	}

}
unsigned char netshowvalue=0xff;
unsigned char ctecCurrentSet=0;
//显示网络制式
static void Show_Net(unsigned char s_netshowvalue){
	unsigned short y=0;

	if(s_netshowvalue==4){
		if(sutApp.UserInfo.tnet==5) guiShowStr(NET_ICON_X, y+1,"5G", FONT_MODE_16X16, REVERSED_NO,guiGetBackColor(),COLOR_STATUS_BAR);
		else guiShowStr(NET_ICON_X, y+1,"4G", FONT_MODE_16X16, REVERSED_NO,guiGetBackColor(),COLOR_STATUS_BAR);
	}else guiClearRect(NET_ICON_X,y,NET_ICON_X+NET_ICON_WX,y+11,COLOR_STATUS_BAR);
}
static void gpsIconShow(char flash){
	typedef struct{
		unsigned char located:1;
		unsigned char gpsF:1;
	}TMP_GPS_DEF;
	static TMP_GPS_DEF tmpGps;
	unsigned short x=GPS_ICON_X,y=0;

	if(tmpGps.located==sutGpsInfo.isGpsValid && tmpGps.gpsF==sutGpsInfo.isGpsWork&& flash==0) return;
	guiClearRect(x,y,x+GPS_ICON_WX,y+11,COLOR_STATUS_BAR);
	if(sutGpsInfo.isGpsWork==1){//GPS打开时
		 guiShowBmp(x,y,"/ext/prepack/GPSA.bmp");
		if(sutGpsInfo.isGpsValid==1) {
			guiShowBmp(x+14,y,"/ext/prepack/GPSL1.bmp");//已定位
			guiShowBmp(x+20,y,"/ext/prepack/GPSL2.bmp");//已定位
		}
	}
	tmpGps.located=sutGpsInfo.isGpsValid;
	tmpGps.gpsF=sutGpsInfo.isGpsWork;
}

//显示电量
static void ShowBatttery(int bat,unsigned int exeInterval){
	static unsigned int flashCnt=0;
	static unsigned char flag=0;
	static unsigned short cnt=0;
	unsigned short x=BAT_ICON_X+1,y=2,h=y+4;
	unsigned char batweight=10;
	int color;

	if(sutApp.chargeStatus)color=COLOR_GREEN;
	else color=guiGetBackColor();
	
	if(bat<WARN_PWR_LEVEL){//请充电
		if(++cnt<(800/exeInterval)) return;
		cnt=0;
		if(sutApp.lowPwrWarn==0){
			sutApp.lowPwrWarn=1;
			sutApp.lowPwrCnt=WARN_TTS_INTERVAL-5000;
		}
		if(flag==0){
			guiShowBmp(x,y,"/ext/prepack/VBAT1.bmp");
			flag=1;
		}else{
			flag=0;
			guiClearRect(x,y-2,x+398,y-2+1+24,COLOR_STATUS_BAR);
		}
		return;
	}else if(bat<355){//340<x<=355 1格   //test 355
		guiShowBmp(x,y,"/ext/prepack/VBAT1.bmp");//3
		guiDrawVLine(h,h+batweight,x+29,y+2,color);
	}
	else if(bat<375){//355<x<=375 2格
		guiShowBmp(x,y,"/ext/prepack/VBAT1.bmp");
		guiDrawVLine(h,h+batweight,x+22,y+2,color);
		guiDrawVLine(h,h+batweight,x+29,y+2,color);//5.12
	}
	else if(bat<400){//375<x<=400 3格
		guiShowBmp(x,y,"/ext/prepack/VBAT1.bmp");
		guiDrawVLine(h,h+batweight,x+15,y+2,color);
		guiDrawVLine(h,h+batweight,x+22,y+2,color);
		guiDrawVLine(h,h+batweight,x+29,y+2,color);//5.12
	}
	else{//>=400 4格
		guiShowBmp(x,y,"/ext/prepack/VBAT1.bmp");
		guiDrawVLine(h,h+batweight,x+8,y+2,color);
		guiDrawVLine(h,h+batweight,x+15,y+2,color);
		guiDrawVLine(h,h+batweight,x+22,y+2,color);
		guiDrawVLine(h,h+batweight,x+29,y+2,color);//5.12
	}
	sutApp.lowPwrWarn=0;
}
//显示时间
static void ShowTime(char flash,unsigned int exeInterval){
	static unsigned short nextExe=0;
	static unsigned char flag=0;
	MY_CLOCK myclock;
	char buf[30]={0};
	if(nextExe==0 || flash){
		//ohpocGetClock(&myclock);
		if(flag){
			snprintf(buf, sizeof(buf), "%02d:%02d",My_Clock.hour, My_Clock. min);
			flag=0;
		}else{
			snprintf(buf, sizeof(buf), "%02d %02d",My_Clock.hour, My_Clock. min);
			flag=1;
		}
		guiShowStr(TIME_ICON_X, 1,buf, FONT_MODE_16X16, REVERSED_NO,guiGetBackColor(),COLOR_STATUS_BAR);
	}
	if(++nextExe>=(1000/exeInterval)) nextExe=0;
}

//显示耳机接入状态
static void ShowEarStatus(char flash){
	static unsigned char lastStatus=0;
	if(lastStatus==sutApp.earLev && flash==0) return;

	if(sutApp.earLev!=0) guiShowBmp(EAR_ICON_X, 1, "/ext/prepack/ear.bmp");
	else guiClearRect(EAR_ICON_X, 1, EAR_ICON_X+EAR_ICON_WX,1+12, COLOR_STATUS_BAR);
	lastStatus=sutApp.earLev;
}
//显示键盘锁状态
static void ShowKeyLocStatus(char flash){
	static unsigned char lastStatus=0;
	if(lastStatus==sutApp.keyLock && flash==0) return;
	
	if(sutApp.keyLock!=0) guiShowBmp(LOCK_ICON_X, 1, "/ext/prepack/lock.bmp");
	else guiClearRect(LOCK_ICON_X, 1, LOCK_ICON_X+LOCK_ICON_WX,12, COLOR_STATUS_BAR);
	lastStatus=sutApp.keyLock;
}
//显示状态栏
void uiShowStatusBar(char flash,unsigned int exeInterval){
	static unsigned char s_netshowvalue=0xff;
	static unsigned char lastPPPStatus;
	static int siCSQ;
	static int siVbat;
	static signed char charging=-1;//充电
	static unsigned short batFirstShow=0;
	static char cardType=0;
	char tempFlash=flash;
	
	if(sutApp.enableKey==0) return;
	if(sutApp.updateStatusBar!=0){
		sutApp.updateStatusBar=0;
		tempFlash=1;
		guiFillRect(0, 0, GLCD_WIDTH-1, UI_STATUS_BAR_HEIGH-1,COLOR_STATUS_BAR);//清除第一区
	}
	//显示信号
	if(tempFlash || siCSQ!=sutApp.g_iCSQ || lastPPPStatus != sutApp.pocPpp){
		lastPPPStatus=sutApp.pocPpp;
		siCSQ=sutApp.g_iCSQ;
		ShowSingle(sutApp.g_iCSQ);
	}

	//显示2G/3G/4G
	if(tempFlash || s_netshowvalue!=netshowvalue){
		s_netshowvalue=netshowvalue;
		
		s_netshowvalue=4;
		
		Show_Net(s_netshowvalue);
	}
	//显示GPS是否正常
	sutGpsInfo.isGpsValid=1;
	sutGpsInfo.isGpsWork=1;
	gpsIconShow(tempFlash);
	//电量显示
	if(tempFlash || siVbat!=sutApp.g_iBAT || sutApp.g_iBAT < WARN_PWR_LEVEL||charging!=sutApp.chargeStatus){
		if(sutApp.g_iBAT>=0){
			siVbat=sutApp.g_iBAT;
			charging=sutApp.chargeStatus;
			ShowBatttery(sutApp.g_iBAT,exeInterval);
		}
	}
	//文本消息显示
	//sutSms.haveUnRead=1;
	//ShowMessageFlag(0);
	//GPS显示
	//时间显示
	ShowTime(tempFlash,exeInterval);
	//显示耳机状态
	//sutApp.earLev=1;
	ShowEarStatus(tempFlash);
	//显示键盘锁状态
	//ShowKeyLocStatus(tempFlash);
}
/****************************状态栏显示部分结束***********************************/


/****************************待机界面显示部分开始***********************************/
typedef enum{
	ME_NO_LOGIN,
	ME_NOBODY_SPEAK,
	ME_IAM_SPEAK,
	ME_SOMEBODY_SPEAK
}ME_ENUM;
static void uiShowGUName(int update);
static void uiShowGuaDuan(unsigned char danhu);
static void uiShowGroup(const char* info);
static void uiShowUser(const char* info);
static void uiShowHuaQuan(const char* info);
static void uiShowCallUserName(void);
static void uiShowOffLineMessage(void);
static void uiShowCopsInfo(void){
	char info[50];
	if(newPara.itemShowType==0){
		switch(sutApp.copstype){
			case 0:case 2:case 4:case 7://中国移动
				snprintf(info, sizeof(info), "中国移动");
				break;
			case 1:case 6:case 9://中移联通
				snprintf(info, sizeof(info), "中国联通");
				break;
			case 3:case 8:case 11://中国电信
				snprintf(info, sizeof(info), "中国电信");
				break;
			default:snprintf(info, sizeof(info), "公网集群对讲系统");break;
		}
	}else snprintf(info, sizeof(info), "公网集群对讲系统");

	guiFillRect(0, UI_STATUS_ITEM_Y, GLCD_WIDTH-1, UI_CONTENT_SHOW_Y-1, guiGetForeColor());//清除第二区
	guiShowCaption(0,info, UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
}

#ifdef USE_LEFT_MOVING
void movingShowNames(unsigned int dlyInterval,unsigned char reset, unsigned char now,unsigned char voice){
	const char *idleptr="空闲";
	const char *voiceptr="本机在讲话";
	const char *danhuptr="单呼模式";
	char *gname=danhuptr;
	char *voicePri=idleptr;
	char *uname=NULL;
	static unsigned int interval=0xffffff;
	
	if(sutPocStatus.logined==0) return;
	//if(sutPocStatus.statusChaned!=0){
	//	sutPocStatus.statusChaned=0;
	//	reset=1;
	//}
	
	if(++interval<500/dlyInterval && reset==0 && now==0) return;//0.5秒刷新一次
	interval=0;
	
	if(sutPocStatus.danHuStatus==0){
		if(sutPocStatus.LocalGroup.name[0]==0) gname=NULL;
		else gname=sutPocStatus.LocalGroup.name;
	}
	if(voice==0) voicePri=idleptr;
	else if(voice==1) voicePri=voiceptr;
	else voicePri=sutPocStatus.CallName;
	if(sutPocStatus.LocalUser.name[0]!=0) uname=sutPocStatus.LocalUser.name;
	mainScreenShowMoving(UI_GROUP_SHOW_Y, reset,gname,uname,voicePri);
}
#endif
void uiShowMainInterface(char status,unsigned int exeInterval){
	short Flag=ME_NO_LOGIN;//ME_ENUM
	static unsigned char danhu=0;
	static short lastFlag=-1;
	static unsigned short siCt=0;
	char info[20];
	static char firstRun=0;
	static unsigned short dly=0;
	char tmpStatus=status;
	static int copsStatus;
	static unsigned int timer;
	static char lockStep=0;
	unsigned char reset=0;
	unsigned char moveFlash=0;
	static unsigned char voice=0;
	
	
	//提示解锁
	if(sutApp.lockShow!=0){
		if(lockStep==0){
			lockStep=1;
			backLightReset();
			uTimerStart(&timer, 1000);
			guiShowMessageBox("请先解锁!");
		}
	}else lockStep=0;
	if(lockStep==1){
		if(uTimerExpired(&timer)){
			guiClearRect(0,GLCD_HEIGHT/2-20,GLCD_WIDTH-1,GLCD_HEIGHT/2+20,guiGetBackColor());
			lastFlag=-1;//让以下刷新一下
			sutApp.lockShow=0;
			lockStep=0;
			sutUIstatus.ItemRefresh=1;//如果"请插卡"有显示，会被刷掉不再显示，这里让它重新显示出来
		}
		return;
	}
	
	#if 0
	/*延时一下1秒后才显示后面的，如果直接登录了，就跳出延时*/
	if(firstRun==0){
		if((++dly>=(1*1000/exeInterval)) || sutPocStatus.logined!=0){
			firstRun=1;
			tmpStatus=1;
			sutApp.enableKey=1;//延时按键操作完成
		}else return;
	}
	#endif
	/*逻辑处理开始*/
	if(tmpStatus){
		guiClearAll(guiGetBackColor());
	#ifdef DEVELOP_MODE
		guiShowStr(1, UI_BOTTOM_SHOW_Y,"研发版垚", FONT_MODE_16X16, REVERSED_NO,guiGetBackColor(),COLOR_STATUS_BAR);
	#else
		guiShowStr(52, UI_BOTTOM_SHOW_Y,"菜单", FONT_MODE_16X16, REVERSED_NO,COLOR_STATUS_BAR, guiGetBackColor());
	#endif
		danhu=sutPocStatus.danHuStatus;
		uiShowGuaDuan(danhu);
		lastFlag=-1;
		siCt=0;
		//return;
	}
	if(copsStatus != sutApp.copstype || tmpStatus){
		copsStatus=sutApp.copstype;
		uiShowCopsInfo();
	}
	//更新单呼显示与否
	if(sutPocStatus.danHuStatus != danhu){
		danhu=sutPocStatus.danHuStatus;
		uiShowGuaDuan(danhu);
	}
	
	//以下持续调用，以便动态更新信息
	if(0==sutPocStatus.logined) Flag=ME_NO_LOGIN;//未登录
	else if(0==sutPocStatus.spk && 0==sutPocStatus.mic){//已登录，无人说话
		Flag=ME_NOBODY_SPEAK;
	}else if(0!=sutPocStatus.mic) Flag=ME_IAM_SPEAK;//已登录，本机说话
	else if(0!=sutPocStatus.spk) Flag=ME_SOMEBODY_SPEAK;//有人说话

	switch(Flag){
		case ME_NO_LOGIN://未登录
			if(Flag != lastFlag){
				guiFillRect(0, UI_CONTENT_SHOW_Y, GLCD_WIDTH-1, UI_BOTTOM_SHOW_Y-1,guiGetBackColor());
				guiShowBmp(0,UI_CONTENT_SHOW_Y, "logo.bmp");
			}
			break;
		case ME_NOBODY_SPEAK://已登录，无人说话
			if(Flag != lastFlag){
				if(ME_NO_LOGIN==lastFlag) guiFillRect(0, UI_CONTENT_SHOW_Y, GLCD_WIDTH-1, UI_CONTENT_SHOW_Y+16,guiGetBackColor());//从未登录到登录,'正在登录'那行也刷掉
				guiFillRect(0, UI_VOICE_SHOW_Y, GLCD_WIDTH-1, UI_VOICE_SHOW_Y+16,guiGetBackColor());
			#ifdef USE_LEFT_MOVING
				voice=0;
				moveFlash=1;
			#else
				uiShowHuaQuan("空闲");
			#endif
				sutPocStatus.statusChaned = 1;
			}
			break;
		case ME_IAM_SPEAK://已登录，本机说话
			if(Flag != lastFlag){
			#ifdef USE_LEFT_MOVING
				voice=1;
				moveFlash=1;
			#else
				guiFillRect(0, UI_VOICE_SHOW_Y, GLCD_WIDTH-1, UI_VOICE_SHOW_Y+16,guiGetBackColor());
				uiShowHuaQuan("本机在讲话");
			#endif
			}
			break;
		case ME_SOMEBODY_SPEAK://已登录，有人说话
			if(Flag != lastFlag){
				guiFillRect(0, UI_VOICE_SHOW_Y, GLCD_WIDTH-1, UI_VOICE_SHOW_Y+16,guiGetBackColor());
				sutPocStatus.statusChaned=1;//保证要刷新名字
			#ifdef USE_LEFT_MOVING
				voice=2;
				moveFlash=1;
			#endif
			}
		#ifndef USE_LEFT_MOVING
			uiShowCallUserName();
		#endif
			break;
	}

	if(Flag>0){//已登录
		if(Flag != lastFlag && (lastFlag==-1 || ME_NO_LOGIN==lastFlag)){
		#ifdef USE_LEFT_MOVING
			reset=1;
		#else
			uiShowGUName(1);
		#endif
		}
		#ifndef USE_LEFT_MOVING
		else uiShowGUName(0);
		#endif
	}else{//未登录
		snprintf(info, sizeof(info),"正在登陆.");
		switch(siCt){//not finished yet
			case 0:
				strcat(info, "  ");
				guiShowStr(1, UI_GROUP_SHOW_Y,info, FONT_MODE_16X16, REVERSED_NO,COLOR_STATUS_BAR,guiGetBackColor());
				break;
			case (1000/APP_SUB_DIV_TIME):
				strcat(info, ". ");
				guiShowStr(1, UI_GROUP_SHOW_Y,info, FONT_MODE_16X16, REVERSED_NO,COLOR_STATUS_BAR,guiGetBackColor());
				break;
			case (2000/APP_SUB_DIV_TIME):
				strcat(info, "..");
				guiShowStr(1, UI_GROUP_SHOW_Y,info, FONT_MODE_16X16, REVERSED_NO,COLOR_STATUS_BAR,guiGetBackColor());
				break;
		}
		//显示登录状态
		uiShowOffLineMessage();
	}

	#ifdef USE_LEFT_MOVING
		movingShowNames(APP_SUB_DIV_TIME,reset,moveFlash,voice);
	#endif
	if(++siCt>=(3000/APP_SUB_DIV_TIME)) siCt=0;

	if(Flag != lastFlag) lastFlag=Flag;
}
static void uiShowGUName(int update){
	static char scNameUser[POC_GROUP_USER_NAME_LEN];
	static char scNameGroup[POC_GROUP_USER_NAME_LEN];
	char name[POC_GROUP_USER_NAME_LEN];
	unsigned short len;
	const unsigned char danHuanBuffer[9]={0xB5,0xA5,0xBA,0xF4,0xC4,0xA3,0xCA,0xBD,0};
	char GroupShowUpdate=0;
	char UserShowUpdate=0;

	if(sutPocStatus.danHuStatus==0){
		if(0!=strcmp(sutPocStatus.LocalGroup.name,scNameGroup) || update!=0){
			memset(scNameGroup,0,sizeof(scNameGroup));
			memcpy(scNameGroup,sutPocStatus.LocalGroup.name,sizeof(scNameGroup));
			GroupShowUpdate=1;
		}
	}else{
		if(0!=strcmp((char *)danHuanBuffer,scNameGroup) || update!=0){
			memset(scNameGroup,0,sizeof(scNameGroup));
			memcpy(scNameGroup, danHuanBuffer,sizeof(danHuanBuffer));
			GroupShowUpdate=1;
		}
	}
		
	if(0!=strcmp(sutPocStatus.LocalUser.name,scNameUser) || update!=0){
		memset(scNameUser,0,sizeof(scNameUser));
		memcpy(scNameUser,sutPocStatus.LocalUser.name,sizeof(scNameUser));
		UserShowUpdate=1;
	}	
	if(GroupShowUpdate){
		guiClearRect(0,UI_GROUP_SHOW_Y,GLCD_WIDTH-1,UI_GROUP_SHOW_Y+16+2,guiGetBackColor());//18
		//刷新群组栏
		if(sutPocStatus.danHuStatus==0) StrIntercept(name, scNameGroup, sizeof(name));
		else snprintf(name, sizeof(name), "单呼模式");
		uiShowGroup(name);
		sutPocStatus.statusChaned=1;
	}
	if(UserShowUpdate){
		guiClearRect(0,UI_USER_SHOW_Y,GLCD_WIDTH-1,UI_GROUP_SHOW_Y+16,guiGetBackColor());//18
		//刷新成员栏
		StrIntercept(name, scNameUser, sizeof(name));
		uiShowUser(name);
	}
}
static void uiShowGuaDuan(unsigned char danhu){
	if(danhu==0) guiClearArea(GLCD_WIDTH-32, UI_BOTTOM_SHOW_Y, 32, 14, guiGetBackColor());
	else guiShowStr(GLCD_WIDTH-32, UI_BOTTOM_SHOW_Y, "挂断", FONT_MODE_16X16, REVERSED_NO, COLOR_STATUS_BAR,guiGetBackColor());
}
static void uiShowGroup(const char* info){
	guiClearRect(2, UI_GROUP_SHOW_Y-2, GLCD_WIDTH-1, UI_GROUP_SHOW_Y-2+17, guiGetBackColor());
	guiShowStr(2, UI_GROUP_SHOW_Y+2,"群组:", FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#ifdef USE_12X12_FONT_ONLY
	guiShowStr(2+30, UI_GROUP_SHOW_Y+2,info, FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#else
	guiShowStr(2+30, UI_GROUP_SHOW_Y+2,info, FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#endif
}
static void uiShowUser(const char* info){
	guiClearRect(2, UI_USER_SHOW_Y-2, GLCD_WIDTH-1, UI_USER_SHOW_Y-2+17, guiGetBackColor());
	guiShowStr(2, UI_USER_SHOW_Y+2,"成员:", FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#ifdef USE_12X12_FONT_ONLY
	guiShowStr(2+30, UI_USER_SHOW_Y+2,info, FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#else
	guiShowStr(2+30, UI_USER_SHOW_Y+2,info, FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#endif
}


void showGroup(void){
	uiShowGroup("默认群组");
}

void showUser(void){
	uiShowUser("小明");
}
static void uiShowHuaQuan(const char* info){
	guiClearRect(2, UI_VOICE_SHOW_Y-2, GLCD_WIDTH-1, UI_VOICE_SHOW_Y-2+17, guiGetBackColor());
	guiShowStr(2, UI_VOICE_SHOW_Y+2,"话权:", FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#ifdef USE_12X12_FONT_ONLY
	guiShowStr(2+30, UI_VOICE_SHOW_Y+2,info, FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#else
	guiShowStr(2+30, UI_VOICE_SHOW_Y+2,info, FONT_MODE_16X16, REVERSED_NO,COLOR_BLACK,guiGetBackColor());
#endif
}
static void uiShowCallUserName(void){
	static char scName[POC_GROUP_USER_NAME_LEN];
	char name[POC_GROUP_USER_NAME_LEN];

	if(0 != strncmp(scName, sutPocStatus.CallName, POC_GROUP_USER_NAME_LEN) ||
	  sutPocStatus.statusChaned){
		//当名字变更或UI切换了，刷新显示
		sutPocStatus.statusChaned=0;
		memcpy(scName, sutPocStatus.CallName, POC_GROUP_USER_NAME_LEN);
		uiShowHuaQuan(scName);
	}
}
static void uiShowOffLineMessage(void){
	static unsigned char laReason;
	char info[50],update=0;
	unsigned short y;
	
	if(sutUIstatus.Status != UIS_STANDBY) return;
	if(sutPocStatus.PocLineOffReason==laReason && sutUIstatus.ItemRefresh==0) return;
	sutUIstatus.ItemRefresh=0;
	laReason=sutPocStatus.PocLineOffReason;
	if(sutApp.cardStatus==0){
		snprintf(info, sizeof(info), "请插卡");
		update=1;
	}else{
		switch(sutPocStatus.PocLineOffReason){
			case 1:snprintf(info, sizeof(info), "无网络连接");break;
			case 2:snprintf(info, sizeof(info), "无法连接");break;
			case 3:snprintf(info, sizeof(info), "没有服务");break;
			case 4:snprintf(info, sizeof(info), "账号信息错误");break;
		}
		if(sutPocStatus.PocLineOffReason!=0) update=1;
	}
	if(update!=0){
		y=UI_USER_SHOW_Y;
		guiClearRect(2,y, GLCD_WIDTH-1, y +12, guiGetBackColor());
		guiShowStr(2, y,info, FONT_MODE_16X16, REVERSED_NO,COLOR_STATUS_BAR,guiGetBackColor());
	}
}
/****************************待机界面显示部分结束***********************************/


/****************************主菜单显示部分开始*************************************/
#include "Palace.h"
SUT_PALACE sutPalace;
void uiShowMenuMain(char update){
	static const char *apcMenuMain[]={
		"群组选择",
		"成员选择",
		"选呼好友",
		"蓝牙设置",
		"信标设置",
		"本机设置",
		"侧键定义",
		"本机信息",
		"首长功能",
		"闹铃设置",
		"初始化",
		"初始化",
		""
	};

	if(update) PalaceInit(&sutPalace,apcMenuMain,"/ext/prepack/Palace","主菜单");
}

void MenuMainResponse(void){
	unsigned short key;
	key=PalaceResponse(&sutPalace);
	if(MKEY_VALUE_MENU==key){	
		switch(sutPalace.Index){
			case 0:
				uISetNextStatus(UIS_MENU_GROUP_SEL);
				break;
			case 1:
				uISetNextStatus(UIS_MENU_USER_SEL);
				break;
			case 2:
				uISetNextStatus(UIS_MENU_MAIL_SEL);
				break;
			case 3:
				uISetNextStatus(UIS_MENU_SYS_SEL);
				break;
			case 4: 
				uISetNextStatus(UIS_MENU_LOCATION_SEL);
				break;
			case 5:
				uISetNextStatus(UIS_MENU_INFO_SEL);
				break;
		}
		uiPushStack(sutPalace.Index);
	}
	else if(MKEY_VALUE_ESC==key){
		
		uISetNextStatus(UIS_STANDBY);
	}
}
/****************************主菜单显示部分结束*************************************/

/*****************************群组选择/成员选择部分开始*********************************/
bool uiSwitchLock=false;
bool isUiSwitchReady(void){return uiSwitchLock;}
static char GUListBoxInited=0;
static char SelMachine=0;
static void ReFlashItemGU(char type);
static void UserAssistAdd(void);
void numGUFlash(int index, int total){
	char info[10];
	int x;
	snprintf(info, sizeof(info), "%d", total);
	x=GLCD_WIDTH-strlen(info)*12;
	guiClearRect(78, UI_STATUS_ITEM_Y, GLCD_WIDTH-1, UI_STATUS_ITEM_Y+12, guiGetForeColor());
	guiShowStr(x, UI_STATUS_ITEM_Y+1, info, FONT_MODE_16X16, REVERSED_NO, guiGetBackColor(), guiGetForeColor());
}
bool setHandleToZero=true;
void uiShowGUSel(char StatusUpdate,unsigned int exeInterval,char type){
	static char machine;
	static unsigned int timer;
	unsigned short timeout;
	char temp;

	if(StatusUpdate) machine=0;

	switch(machine){
		case 0:
			if(sutPocStatus.logined == 0){//not login
				guiShowMessageBox("  请先登录   ");
				uTimerStart(&timer, 1000);
				machine=1;
			}else{
				uiSwitchLock=true;
				if(type==0) appSleepCtl(ASLEEP_GGROUP, 1);//要获取群组信息，不让休眠,记得超时或获取成功或获取失败后需要释放
				else appSleepCtl(ASLEEP_GUSER, 1);
				UiassistStart(0);
				machine=2;
				setHandleToZero=true;
			}
			break;
		case 1:
			if(uTimerExpired(&timer)){
				 uISetNextStatus(UIS_STANDBY);
			}
			break;
		case 2:
			temp=getAssistResult();
			if(temp){//??è?íê3é
				guiClearAll(guiGetBackColor());
				if(type==0){
					guiShowCaption(30,"群组选择",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16); //0
					uiMenuShowBottomIndacitor("确定", "返回");
				}else{
					guiShowCaption(30,"用户选择",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16); //0
					uiMenuShowBottomIndacitor("单呼", "返回");
				}
				ReFlashItemGU(type);
				uiMenuShowBottomLine();
				machine=3;
				//获取成功后退出释放休眠
				if(type==0) appSleepCtl(ASLEEP_GGROUP, 0);
				else appSleepCtl(ASLEEP_GUSER, 0);
				uiSwitchLock=false;
			}
			break;
	}
	if(machine != 3) return;
	
	UserAssistAdd();
	LeftMoveSelectedItem(&sutListBox);
}
void GroupSelResponse(){
	unsigned int key;
	char buf[50];
	int i;

	key=getKeyValue();
	switch(SelMachine){
		case 0:
			if(sutListBox.handle==0 && MKEY_VALUE_UP==key){		
				UiassistStart(1);
				SelMachine=1;	
			}else if(((sutListBox.handle+1) == sutListBox.itemnum) && (MKEY_VALUE_DOWN==key)){
				setHandleToZero=true;
				UiassistStart(2);
				SelMachine=2;
			}
			
			key=ListBoxResponse(&sutListBox);
			if(MKEY_VALUE_ESC==key){
					uiAssist.status=0;
				if(getStackStruct()->FastUiChange)uISetNextStatus(UIS_STANDBY);
				else uISetNextStatus(UIS_MENU_MAIN);
				appSleepCtl(ASLEEP_GGROUP, 0);//按键退出后释放休眠
				GUListBoxInited=0;
				uiSwitchLock=false;
			}else if(MKEY_VALUE_MENU==key){
				if(0 == sutPocStatus.ListCurOnlineNum) break;
				///////////////////////////////////////
				UiassistEnd(0);
				sutApp.groupTTSEnable=1;
				snprintf(buf, sizeof(buf),"AT+POC=090000%08x\r\n",sutPocStatus.AllGroups[sutListBox.handle].ID);
				msgAtSend(buf);
				MSG_INFO(1,buf);
				snprintf(buf, sizeof(buf),"进入:%s",sutPocStatus.AllGroups[sutListBox.handle].name);
				MSG_INFO(1,buf);
				uISetNextStatus(UIS_STANDBY);
				SelMachine=0;
			}
		break;
	}
}
void UserSelResponse(){
	char buf[50];
	unsigned int key;
	
	key=getKeyValue();
	switch(SelMachine){
		case 0:
			if(GUListBoxInited==0) break;//还未初始化listbox时，不执行按键响应
			if(sutListBox.handle==0 && MKEY_VALUE_UP==key){	
				UiassistStart(1);
				SelMachine=1;	
			}else if((sutListBox.handle+1) == sutListBox.itemnum && (MKEY_VALUE_DOWN==key)){
				setHandleToZero=true;
				UiassistStart(2);
				SelMachine=2;
			}
			key=ListBoxResponse(&sutListBox);
			if(MKEY_VALUE_ESC==key){
				uiAssist.status=0;
				if(getStackStruct()->FastUiChange)uISetNextStatus(UIS_STANDBY);
				else uISetNextStatus(UIS_MENU_MAIN);
				appSleepCtl(ASLEEP_GUSER, 0);//按键退出后释放休眠
				GUListBoxInited=0;
				uiSwitchLock=false;
			}else if(MKEY_VALUE_MENU==key){
				if(0 == sutPocStatus.ListCurOnlineNum) break;
				UiassistEnd(0);
				snprintf(buf, sizeof(buf),"AT+POC=0A0000%08x\r\n",sutPocStatus.AllUsers[sutListBox.handle].ID);
				msgAtSend(buf);
				MSG_INFO(1, buf);
				snprintf(buf, sizeof(buf),"呼叫:%s",sutPocStatus.AllUsers[sutListBox.handle].name);
				MSG_INFO(1, buf);
				uISetNextStatus(UIS_STANDBY);
				SelMachine=0;
			}
		break;
	}
}
static void UserAssistAdd(void){
	switch(SelMachine){
		case 1:
			if(getAssistResult()){
				 if(sutUIstatus.Status==UIS_MENU_GROUP_SEL)ReFlashItemGU(0);
				else ReFlashItemGU(1);
				SelMachine=0;
			}
			break;
		case 2:
			if(getAssistResult()){
				if(sutUIstatus.Status==UIS_MENU_GROUP_SEL)ReFlashItemGU(0);
				else ReFlashItemGU(1);
				SelMachine=0;
			}
			break;
	}
}
static void ReFlashItemGU(char type){
	static unsigned short susCt=0;
	static const char *accIconFileName[]={
		"Group1.bmp",
		"Group2.bmp",
		"people1.bmp",
		"people2.bmp",
		""
	};
	static char *icons[3];
	int i;
	unsigned short timeout;
	static const char *NullGU="";
	static char *GUName[POC_ALL_GROUPS_NUM+1];	//5
	static char GUFeatures[POC_ALL_GROUPS_NUM+1];//5
	unsigned int showHandle;
	char info[30];
	if(type==0){
		icons[0]=accIconFileName[0];
		icons[1]=accIconFileName[1];
	}else{
		icons[0]=accIconFileName[2];
		icons[1]=accIconFileName[3];
	}
	icons[2]=accIconFileName[4];
	for(i=0;i<=POC_ALL_GROUPS_NUM;i++){
		GUName[i]=NullGU;
		GUFeatures[i]=0;
	}
	for(i=0;i<sutPocStatus.ListFillIndex;i++){
		GUFeatures[i]=1;
		if(type==0){
			if(sutPocStatus.AllGroups[i].ID==sutPocStatus.LocalGroup.ID) GUFeatures[i]=0;
			GUName[i]=sutPocStatus.AllGroups[i].name;
		}else{
			if(sutPocStatus.AllUsers[i].ID==sutPocStatus.LocalUser.ID) GUFeatures[i]=0;
			GUName[i]=sutPocStatus.AllUsers[i].name;
		}
	}
	
   if(sutPocStatus.ListCurOnlineNum==0 || sutPocStatus.ListDetailValid==0){//没有成员总数或没有获取到明细
		GUName[0]="空";
		GUFeatures[i]=0;
	}
  
	//初始化ListBox控件
	numGUFlash(0,sutPocStatus.ListCurOnlineNum);
	if(setHandleToZero==true){
		showHandle=0;
		setHandleToZero=false;
	}else{
		if(sutPocStatus.ListFillIndex) showHandle=sutPocStatus.ListFillIndex-1;
		else showHandle=0;
	}

	ListBoxInit(&sutListBox,GUName,0,icons,GUFeatures,showHandle);
	GUListBoxInited=1;
}
/*****************************群组选择/成员选择部分结束*********************************/

/*****************************系统设置部分开始*********************************/
void uiShowMenuSysSetup(char flash){
	static const char *apcPtr[]={
		"1.LCD设置",
		"2.功耗模式设置",
		"3.提示音设置",
		"4.键锁设置",
		"5.工程设置",
		""
	};
	if(flash){
		msgAtSend("AT+RSIM\r\n");//进此菜单前查询一下卡用于后面显示
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"系统设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor("确认", "返回");
		uiMenuInit(&sutMenuSysSetup,apcPtr,FONT_MODE_16X16);
	}
}

void sysTemSetResponse(void){
	unsigned short key;
	
	key=uiMenuResponse(&sutMenuSysSetup);
	if(MKEY_VALUE_MENU==key){
		switch(sutMenuSysSetup.handle){
			case 0://LCD设置
				uISetNextStatus(UIS_MENU_SYS_LCD);
				break;
			case 1://功耗模式设置
				uISetNextStatus(UIS_MENU_SYS_PWR);
				break;
			case 2://提示音设置
				uISetNextStatus(UIS_MENU_SYS_NOTE);
				break;
			case 3://键锁设置
				uISetNextStatus(UIS_MENU_SYS_LOCK);
				break;
			case 4://工程设置
				uISetNextStatus(UIS_MENU_SYS_FACTORY);
				break;
		}
		if(sutMenuSysSetup.handle<=4) uiPushStack(sutMenuSysSetup.handle);
	}else if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_MAIN);
}
/*****************************系统设置部分结束*********************************/

/*****************************定位设置部分开始*********************************/
unsigned char tempGpsIndex;
static locationTimeFlash(char type);
static locationXYFlash(char flash);
void uiShowMenuLocationSel(char flash){
	static unsigned int timer;
	static char machine=0;
	if(flash){
		machine=0;
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"定位设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		if(newPara.gpsEnable==0){
			machine=1;
			uiMenuShowBottomIndacitor(NULL, "返回");
			guiShowMessageBox("版本不支持");
			uTimerStart(&timer, 1000);
			return;
		}
		uiMenuShowBottomIndacitor("保存", "返回");
		locationTimeFlash(0);
	}
	if(newPara.gpsEnable!=0) locationXYFlash(flash);
	if(machine==1){
		if(uTimerExpired(&timer)){
			machine=0;
			uISetNextStatus(UIS_MENU_MAIN);
		}
	}
}
void loationSetResponse(void){
	unsigned short key;
	
	key=getKeyValue();
	if(newPara.gpsEnable==0){
		if(key!=MKEY_VALUE_ESC) return;
	}
	if(MKEY_VALUE_UP==key) locationTimeFlash(1);
	else if(MKEY_VALUE_DOWN==key) locationTimeFlash(2);
	else if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_MAIN);
	else if(MKEY_VALUE_MENU==key){
		if(tempGpsIndex != newPara.gpsTimeIndex){
			MSG_INFO(1, "GPS timeIndex update:%d",getGPSTimeValue(tempGpsIndex));
			newPara.gpsTimeIndex=tempGpsIndex;
			sysIniSave("location");
			gpsCheckInfo();//检测一下
		}
		uISetNextStatus(UIS_MENU_MAIN);
	}
}
static locationTimeFlash(char type){
	unsigned short gpsTimeValue;
	char buf[50];
	unsigned short y=70;

	if(type==0){
		tempGpsIndex=newPara.gpsTimeIndex;
	}else if(type==1){
		if(++tempGpsIndex>=GPS_TABLE_NUM) tempGpsIndex=0;
	}else if(type==2){
		if(tempGpsIndex>0) tempGpsIndex--;
		else tempGpsIndex=GPS_TABLE_NUM-1;
	}else return;
	
	gpsTimeValue=getGPSTimeValue(tempGpsIndex);
	if(gpsTimeValue==0) snprintf(buf, sizeof(buf), "定位上传设置:关闭");
	else snprintf(buf, sizeof(buf), "定位上传设置:%d秒",gpsTimeValue);
	guiClearRect(0,y,GLCD_WIDTH-1, y+12,guiGetBackColor());
	guiShowStr(30,y, buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
}
static locationXYFlash(char flash){
	char buf[50];
	unsigned short y=UI_CONTENT_SHOW_Y+2;
	
//	if(gpsInfo.update==0 && flash==0) return;
//	gpsInfo.update=0;
	guiClearRect(0, y,GLCD_WIDTH-1, y+12+5+12,guiGetBackColor());
	snprintf(buf, sizeof(buf), "纬度 S:%d.%05d",sutGpsInfo.latitue/1000000,sutGpsInfo.latitue%1000000);
	guiShowStr(30,y, buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
	y+=12+5;
	snprintf(buf, sizeof(buf), "经度 W:%d.%05d",sutGpsInfo.longitue/1000000,sutGpsInfo.longitue%1000000);
	guiShowStr(30,y, buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
}
/*****************************定位设置部分结束*********************************/

/*******************************终端信息开始**********************************/
unsigned char sysInfoType;
static void sysInfoFlash(void){
	unsigned short x,y;
	char buf[50];
	unsigned char LineSpace=12+4;
	unsigned char NeedSpace=0;
	int len;
	char yunyingshang=0;
	
	x=0,y=UI_CONTENT_SHOW_Y+5;
	guiClearRect(0,y,GLCD_WIDTH-1,UI_BOTTOM_LINE_Y-1,guiGetBackColor());
	NeedSpace=0;
	if(sysInfoType==0){
		//终端编码
		snprintf(buf,sizeof(buf),"PSN:%lu", sutApp.UserInfo.psn);
		len=strlen(buf);
		if(len>17){
			y+=LineSpace;
			NeedSpace=LineSpace;
			guiShowStr(x+56,y,buf+17,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			buf[17]=0;
			y-=LineSpace;
		}
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+=LineSpace;y+=NeedSpace;
		//账号
		snprintf(buf,sizeof(buf),"账号:%s", sutApp.UserInfo.OtherId);
		len=strlen(buf);
		if(len>17){
			y+=LineSpace;
			NeedSpace=LineSpace;
			guiShowStr(x+56,y,buf+17,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			buf[17]=0;
			y-=LineSpace;
		}
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+=LineSpace;y+=NeedSpace;

		
		//应用版本
		snprintf(buf, sizeof(buf),"应用版本:%s",OHPOC_VERSION);
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+=LineSpace;
		//内部版本
		snprintf(buf, sizeof(buf),"内部版本:%d",CUSTOMER_CODE);
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
	}else if(sysInfoType==1){

		//对讲平台
		snprintf(buf, sizeof(buf),"对讲平台:%s", OHPOC_POC_PLATFORM);
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+=LineSpace;
		//对讲版本号
		NeedSpace=0;
		snprintf(buf, sizeof(buf),"对讲版本:%s",sutApp.pocVersion);
		len=strlen(buf);
			if(len>15){
				y+=LineSpace;
				NeedSpace=LineSpace;
				guiShowStr(0,y,buf+15,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
				buf[15]=0;
				y-=LineSpace;
			}
			guiShowStr(0,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+=LineSpace; y+=NeedSpace;

		//模块
		memset(buf,sizeof(buf),0);
		snprintf(buf,sizeof(buf),"模块:%s", sutApp.modemVer);
		len=strlen(buf);
		if(len>16){
			y+=LineSpace;
			guiShowStr(x+32,y,buf+16,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			buf[16]=0;
			y-=LineSpace;
		}
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
	}else if(sysInfoType==2){
			NeedSpace=0;
			snprintf(buf, sizeof(buf),"ICCID:");
			guiShowStr(0,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			y+=LineSpace;
			//终端编码
			memset(buf,0,sizeof(buf));
		switch(sutApp.copstype){
			case 46000:
			case 46002:
			case 46007:
				yunyingshang=1;
				break;
			case 46001:
			case 46006:
				yunyingshang=2;
				break;
			case 46003:
			case 46005:
			case 46008:
			case 46009:
			case 46010:
			case 46011:
				yunyingshang=3;
				break;
			default:
			yunyingshang=0;
			break;
		}
			
		if(LSAPI_SIM_GetICCID(buf)==0&&yunyingshang!=0){
				strncpy(sutApp.ICCID, buf,sizeof(sutApp.ICCID));
				if(yunyingshang!=1){
					sutApp.ICCID[19]=0;
				}
				snprintf(buf, sizeof(buf),"%s",sutApp.ICCID);
				//guiShowStr(0,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
	
			}else{
				snprintf(buf, sizeof(buf),"未知");
				//guiShowStr(0,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			}
			len=strlen(buf);
			if(len>15){
				y+=LineSpace;
				NeedSpace=LineSpace;
				guiShowStr(0,y,buf+15,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
				buf[15]=0;
				y-=LineSpace;
			}
			guiShowStr(0,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			y+=LineSpace; y+=NeedSpace;

		
			//IMEI
			snprintf(buf, sizeof(buf),"IMEI:");
			guiShowStr(0,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			y+=LineSpace;
			memset(buf,0,sizeof(buf));
			if(LSAPI_SIM_GetIMEI(buf)==0){
			guiShowStr(0,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			}else{
			guiShowStr(0,y,"未知",FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
			}	
	}else if(sysInfoType==3){
		//显示服务器
		//对讲IP
		//getPIPAddr();getGIPAddr();
		guiShowStr(x,y,"交换服务器:",FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+= LineSpace;
		snprintf(buf, sizeof(buf),"%s",showPIP);
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+=LineSpace;
		//GPS IP
		guiShowStr(x,y,"定位服务器:",FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+= LineSpace;
		snprintf(buf, sizeof(buf),"%s",showGIP);
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
		y+=LineSpace;
		snprintf(buf, sizeof(buf),"端口:%d",newPara.gpsPort);
		guiShowStr(x,y,buf,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK,guiGetBackColor());
	}
}

void uiShowInformation(char update){
	if(update){
		sysInfoType=0;
		msgAtSend("AT+POC=7D0000\r\n");
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"终端信息",UI_STATUS_BAR_HEIGH,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor(NULL, "返回");
		sysInfoFlash();
	}
}
void uiShowInformationResponse(void){
	unsigned short key=getKeyValue();
	
	if(MKEY_VALUE_ESC==key) uISetNextStatus(sutUIstatus.LastStatus);
	else if(MKEY_VALUE_DOWN==key){
		if(++sysInfoType>2) sysInfoType=0;
		sysInfoFlash();
	}else if(MKEY_VALUE_UP==key){
		if(sysInfoType==0) sysInfoType=2;
		else sysInfoType--;
		sysInfoFlash();
	}else if(MKEY_VALUE_CB_IP==key){
		sysInfoType=3;
		sysInfoFlash();
	}
}
/*****************************终端信息结束**********************************/

static const char *commonIcon2[]={
	"APN.bmp",
	"APN1.bmp",
	""
};

/*****************************LCD设置开始**********************************/
unsigned char lcdTmpIndex;
static void lcdTimeFlash(char type){
	char buf[50];
	unsigned short x=4,y=56,value;
	
	if(type==0) guiShowStr(x+20, y, "背光时间:", FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
	else if(type==1){
		if(++lcdTmpIndex>=5) lcdTmpIndex=0;
	}else if(type==2){
		if(lcdTmpIndex>0) lcdTmpIndex--;
		else lcdTmpIndex=4;
	}
	value=newPara.lcdParaList[lcdTmpIndex];
	if(value==0) snprintf(buf, sizeof(buf), " 常亮   ");
	else snprintf(buf, sizeof(buf), "%3d 秒", value);
	guiShowStr(x+80, y, buf, FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
}

void uiShowLcdSel(char StatusUpdate){
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"LCD设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		lcdTmpIndex=newPara.lcdParaDefaultIndex;
		lcdTimeFlash(0);
		uiMenuShowBottomIndacitor("保存", "返回");
	}
}

void uiShowLcdSelResponse(void){
	unsigned short key=getKeyValue();
	
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_SEL);
	else if(MKEY_VALUE_DOWN==key)lcdTimeFlash(1);
	else if(MKEY_VALUE_UP==key) lcdTimeFlash(2);
	else if(MKEY_VALUE_MENU==key){
		getStackStruct()->ok_back=1;
		if(lcdTmpIndex != newPara.lcdParaDefaultIndex){
			newPara.lcdParaDefaultIndex=lcdTmpIndex;
			MSG_INFO(1, "LCD TimeUpdate");
			backLightReset();
			sysIniSave("lcd");
		}
		uISetNextStatus(UIS_MENU_SYS_SEL);
	}
}
/*****************************LCD设置结束**********************************/

/*****************************网络设置开始**********************************/
const unsigned char netModeSetTable[3]={1,2,4};//设置制式:AUTH,2G,4G
/*输入制式源始值，返回索引值对应值*/
unsigned char getNetModeIndex(unsigned char netModeValue){
	unsigned char i;
	for(i=0;i<sizeof(netModeSetTable);i++){
		if(netModeValue==netModeSetTable[i]) return i;
	}
	return 0xff;//无对应值
}
/*输入制式索引值，返回制式源始值*/
unsigned char getNetModeValue(unsigned char netModeIndex){
	if(netModeIndex>=sizeof(netModeSetTable)) return 0xff;
	else return netModeSetTable[netModeIndex];
}
/*输入制式索引值，发送对应该命令给模块*/
void netModeSetCmd(unsigned char netMode){
	char buf[30];
	
	snprintf(buf, sizeof(buf), "AT+CTEC=%d,%d\r\n",ctecCurrentSet, netMode);
	msgAtSend(buf);
}
#define NET_MODE_NUM 3
void uiShowNetSel(char StatusUpdate){
	static const char *netMode[NET_MODE_NUM+1]={
		"AUTO",
		"2G",
		"4G",
		""
	};
	char Features[NET_MODE_NUM];
	unsigned char i;
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"网络设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		for(i=0;i<NET_MODE_NUM;i++){
			if(i==newPara.netMode) Features[i]=1;
			else Features[i]=0;
		}
		ListBoxInit(&sutListBox,netMode,0,commonIcon2,Features,0);
		uiMenuShowBottomIndacitor("保存", "返回");
	}
}

void uiShowNetSelResponse(void){
	unsigned short key=ListBoxResponse(&sutListBox);
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_SEL);
	else if(MKEY_VALUE_MENU==key){
		getStackStruct()->ok_back=1;
		if(sutListBox.handle*2 != newPara.netMode){
			newPara.netMode=sutListBox.handle*2;
			MSG_INFO(1, "netMode update:%d", newPara.netMode);
			sysIniSave("NetSel");
			netModeSetCmd(newPara.netMode);
		}
		uISetNextStatus(UIS_MENU_SYS_SEL);
	}
}
/*****************************网络设置结束**********************************/

/*****************************卡选择设置开始**********************************/
#define SIM_MODE_NUM 2
void uiShowSimSel(char StatusUpdate){
	static const char *simMode[SIM_MODE_NUM+1]={
		"卡1",
		"卡2",
		""
	};
	char Features[SIM_MODE_NUM];
	unsigned char i;
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"SIM设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		for(i=0;i<SIM_MODE_NUM;i++){
			if(i==sutApp.simSel) Features[i]=1;
			else Features[i]=0;
		}
		ListBoxInit(&sutListBox,simMode,0,commonIcon2,Features,0);
		uiMenuShowBottomIndacitor("保存", "返回");
	}
}

void uiShowSimSelResponse(void){
	char buf[30];
	unsigned short key=ListBoxResponse(&sutListBox);
	if(MKEY_VALUE_ESC==key){
		if(getStackStruct()->FastUiChange)uISetNextStatus(UIS_STANDBY);
		else uISetNextStatus(UIS_MENU_SYS_SEL);
	}else if(MKEY_VALUE_MENU==key){
		getStackStruct()->ok_back=1;
		if(sutListBox.handle != sutApp.simSel){
			snprintf(buf, sizeof(buf), "AT+SIMCROSS=%d\r\n",sutListBox.handle);
			msgAtSend(buf);
			guiShowMessageBox("请重启设备");
			msgAtSend("AT+TRB\r\n");
			LSAPI_OSI_ThreadSleep(100);
			CTL_POWER_HOLD(false);
			for(;;){
				MSG_INFO(1, "card changed, wait user reboot");
				CTL_POWER_HOLD(false);
				LSAPI_OSI_ThreadSleep(1000);
			}
		}
		uISetNextStatus(UIS_MENU_SYS_SEL);
	}
}
/*****************************卡选择设置结束**********************************/

/*****************************功耗设置开始**********************************/
typedef enum{
	PMODE_DEFAULT_LOW,
	PMODE_SUPER_LOW,
	PMODE_NORMAL
}PWR_ENUMDEF;
//低功耗模式
#define MODE_LOW_PWR_NONE_4G 5
#define MODE_LOW_PWR_IS_4G   25
//超长待机模式
#define MODE_LONG_LOW_PWR_NONE_4G 5
#define MODE_LONG_LOW_PWR_IS_4G   55
//常规模式
#define MODE_NORMAL__NONE_4G 5
#define MODE_NORMAL__IS_4G   5
//终端放弃设置模式，由服务器决定使用什么
#define MODE_AUTO____NONE_4G 0
#define MODE_AUTO____IS_4G   0

//默认功耗模式
#define MODE_PWR_DEFAULT_NONE_4G MODE_LOW_PWR_NONE_4G
#define MODE_PWR_DEFAULT_IS_4G	 MODE_LOW_PWR_IS_4G

const char ZZD_PWRMODE[3]={2,0,3};
 void pwrModeSetCmd(unsigned char pwrMode){
	char buf[30];
	memset(buf,0,sizeof(buf));
	snprintf(buf, sizeof(buf), "AT+POC=3D0000%02d\r\n",ZZD_PWRMODE[pwrMode]);
	msgAtSend(buf);
}
void pwrModeAckHandler(unsigned char seg1, unsigned char seg2){
	if(seg1==MODE_PWR_DEFAULT_NONE_4G && seg2==MODE_PWR_DEFAULT_IS_4G && newPara.pwrMode != PMODE_DEFAULT_LOW){
		goto SAVE_PWR_MODE;
	}else if(seg1==MODE_LONG_LOW_PWR_NONE_4G && seg2==MODE_LONG_LOW_PWR_IS_4G && newPara.pwrMode != PMODE_SUPER_LOW){
		goto SAVE_PWR_MODE;
	}else if(seg1==MODE_NORMAL__NONE_4G && seg2==MODE_NORMAL__IS_4G && newPara.pwrMode != PMODE_NORMAL){
		goto SAVE_PWR_MODE;
	}else if(seg2!=MODE_LOW_PWR_IS_4G&&seg2!=MODE_LONG_LOW_PWR_IS_4G&& seg2!=MODE_NORMAL__IS_4G){
		//Seg2 3个模式都不满足则切换为默认模式
		newPara.pwrMode = PMODE_DEFAULT_LOW;
		goto SAVE_PWR_MODE;
	}
	return;
	SAVE_PWR_MODE:
	sysIniSave("workPwr");
	pwrModeSetCmd(newPara.pwrMode);
}
#define PWR_MODE_NUM 3
void uiShowPwrSel(char StatusUpdate){
	static const char *pwrMode[PWR_MODE_NUM+1]={
		"常规省电模式",
		"高性能模式",
		"超长待机模式",
		"",
	};
	char Features[PWR_MODE_NUM];
	unsigned char i;
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"功耗设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		for(i=0;i<PWR_MODE_NUM;i++){
			if(i==newPara.pwrMode) Features[i]=1;
			else Features[i]=0;
		}
		ListBoxInit(&sutListBox,pwrMode,0,commonIcon2,Features,newPara.pwrMode);
		uiMenuShowBottomIndacitor("保存", "返回");
	}
}

void uiShowPwrSelResponse(void){
	unsigned short key=ListBoxResponse(&sutListBox);
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_SEL);
	else if(MKEY_VALUE_MENU==key){
		getStackStruct()->ok_back=1;
		if(sutListBox.handle != newPara.pwrMode){
			newPara.pwrMode=sutListBox.handle;
			MSG_INFO(1, "pwrMode update:%d", newPara.pwrMode);
			sysIniSave("pwrSel");
			pwrModeSetCmd(newPara.pwrMode);
		}
		uISetNextStatus(UIS_MENU_SYS_SEL);
	}
}
/*****************************功耗设置结束**********************************/

/*****************************服务器设置输入密码开始**********************************/
void uiShowServerPassSel(char StatusUpdate){
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"密码验证",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		NumEditInit(&sutNumEdit,(GLCD_WIDTH-6*8)/2,(GLCD_HEIGHT-16)/2,"000000");
		NumEditShow(&sutNumEdit);
		uiMenuShowBottomIndacitor("[P1]加值", "[P2]移动");
	}
}

void uiShowServerSelPassResponse(void){
	unsigned short key=getKeyValue();
	
	NumEditResponse(&sutNumEdit);
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_FACTORY);
	else if(MKEY_VALUE_MENU==key){
		if(memcmp(sutNumEdit.buffer, getMenuKey(), 6)==0) uISetNextStatus(UIS_MENU_SYS_SERVER);
		else{
			guiShowMessageBox("密码错误");
			LSAPI_OSI_ThreadSleep(1000);
			getStackStruct()->ok_back=1;
			uISetNextStatus(UIS_MENU_SYS_FACTORY);
		}
	}
}
/*****************************服务器设置输入密码结束**********************************/

/*****************************服务器设置开始**********************************/
void uiShowServerSel(char StatusUpdate){
	static const char *serIcons[]={
		"Ser.bmp",
		"Sersel.bmp",
		""
	};
	static const char *serName[]={
		"杭州服务器",
		"山东服务器",
		"IP分发服务器",
		"集群服务器",
		"自定义服务器",
		"",
	};
	char Features[5];
	unsigned char tempSer,i;
	
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"服务器列表",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor("确认", "返回");
		tempSer=newPara.serList.defaultuse;
		for(i=0;i<=SERVER_UR;i++){
			if(i==tempSer) Features[i]=1;
			else Features[i]=0;
		}
		ListBoxInit(&sutListBox,serName,0,serIcons,Features,0);
	}
}

void uiShowServerSelResponse(void){
	unsigned char tempSer;
	char buf[50],buf1[100];
	unsigned short key=ListBoxResponse(&sutListBox);
	
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_SEL);
	else if(MKEY_VALUE_MENU==key){
		tempSer=sutListBox.handle;
		if(tempSer != newPara.serList.defaultuse){
			newPara.serList.defaultuse=tempSer;
			sysIniSave("serverSel");
			getGIPAddr();
			snprintf(buf, sizeof(buf), "ip=%s;domain=%s;",getPIPAddr(),getDOMAINAddr());
			AscStrTurnHexStr(buf,buf1);
			msgAtSend("AT+POC=010000");
			msgAtSend(buf1);
			msgAtSend("\r\n");
			LSAPI_OSI_ThreadSleep(100);
			msgAtSend("AT+POC=040000\r\n");
		}
		uISetNextStatus(UIS_STANDBY );
	}
}
/*****************************服务器设置结束**********************************/


/*****************************版本设置开始**********************************/
unsigned char fotaStep;
unsigned int fotaTick;
void fotaStepSet(unsigned char newStep){
	fotaStep=newStep;
}
void fotaMsgShow(char *msg){
#ifdef USE_12X12_FONT_ONLY
	int len=guiGetStrXLen((char *)msg,FONT_MODE_16X16);
#else
	int len=guiGetStrXLen((char *)msg,FONT_MODE_16X16);
#endif
	guiClearRect(0, 60, GLCD_WIDTH-1, 60+16,guiGetBackColor());
#ifdef USE_12X12_FONT_ONLY
	guiShowStr((GLCD_WIDTH-len)/2,60+2, msg,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
#else
	guiShowStr((GLCD_WIDTH-len)/2,60, msg,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
#endif
}
void fotaMsgShow2(char *msg1, char *msg2){
	guiClearRect(0, 45, GLCD_WIDTH-1, 45+16+2+16,guiGetBackColor());
	int len=guiGetStrXLen((char *)msg1,FONT_MODE_16X16);
	guiShowStr((GLCD_WIDTH-len)/2,45, msg1,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
	len=guiGetStrXLen((char *)msg2,FONT_MODE_16X16);
	guiShowStr((GLCD_WIDTH-len)/2,45+16+2, msg2,FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
}
void uiShowVersionSel(char StatusUpdate){
	char buf[50];
	if(StatusUpdate){
		sutApp.fotaVersion[0]=0;
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"版本更新",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		msgAtSend("AT+FOTA?\r\n");
		fotaStep=0;
		sutApp.fotaStatus=0;
		fotaMsgShow("正在检测版本");
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor("确定", "返回");
		uTimerStart(&fotaTick, 2000);
	}
	switch(fotaStep){
		case 0:
			if(sutApp.fotaStatus==1){
				fotaMsgShow("无更新版本");
				fotaStep=4;
				break;
			}else if(sutApp.fotaStatus==2){
				fotaMsgShow("是否更新到:");
				snprintf(buf, sizeof(buf), "%s",sutApp.fotaVersion);
				fotaMsgShow(buf);
				fotaStep=1;
				break;
			}
			if(uTimerExpired(&fotaTick)){
				fotaMsgShow("检测超时");
				fotaStep=4;
			}
			break;
		case 1://等待用户确定
			break;
		case 2://用户确定后等待结果
			if(sutApp.fotaStatus==3){
				fotaMsgShow("升级失败");
				fotaStep=4;
				break;
			}else if(sutApp.fotaStatus==4){
				sutApp.fotaStatus=0;//否则会一直刷新本消息
				fotaMsgShow("正在下载");
				break;
			}else if(sutApp.fotaStatus==5){
				fotaMsgShow("下载成功");
				fotaStep=3;
				break;
			}
			if(uTimerExpired(&fotaTick)){
				fotaMsgShow("超时退出");
				fotaStep=4;
			}
			break;
		case 3://升级成功，等待重启
			LSAPI_OSI_ThreadSleep(1000);
			fotaStep=6;
			fotaMsgShow2("确定将关机,再","开机需约60秒");
			
			//msgAtSend("AT+POC=050000\r\n");//停止POC后复位
			//MSG_INFO(1, "Stop poc");
			//LSAPI_OSI_ThreadSleep(2000);
			//msgAtSend("AT+TRB\r\n");
			//MSG_INFO(1, "Reset system!!!");
			//while(1){LSAPI_OSI_ThreadSleep(1000);}
			break;
		case 4://延时显示2秒后退出
			uTimerStart(&fotaTick, 2000);
			fotaStep=5;
			break;
		case 5://退出升级流程
			if(uTimerExpired(&fotaTick)){
				getStackStruct()->ok_back=1;
				uISetNextStatus(UIS_MENU_SYS_FACTORY);
			}
			break;
		case 6://无更新版本
			sutApp.timeOutCnt=0;//不让界面返回待机界面
			break;
	}
}

void uiShowVersionSelResponse(void){
	unsigned char key=getKeyValue();
	if(fotaStep!=1 && fotaStep!=6) return;
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_FACTORY);
	else if(MKEY_VALUE_MENU==key){
		if(fotaStep==1){
			fotaMsgShow("请勿断电!");
			fotaStep=2;
			msgAtSend("AT+FOTA=1\r\n");
			uTimerStart(&fotaTick, 10000);
		}else if(fotaStep==6){
			paControl(false);//防止一直滴音
			MSG_INFO(1, "Reset system!!!");
			msgAtSend("AT+POC=050000\r\n");
			msgAtSend("AT+TRB\r\n");
			while(1){LSAPI_OSI_ThreadSleep(1000);}
		}
	}
}
/*****************************版本设置结束**********************************/

/*****************************工程设置开始*********************************/
void uiShowFactory(char flash){
	static const char *apcPtr[]={
		//"1.服务器设置",
		//"2.版本升级",
		"1.CSQ查看",
		"2.耳机MIC增益",
//		"5.耳机SPK增益",
		"3.字库更新",
		""
	};
	if(flash){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"工程设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor("确认", "返回");
		uiMenuInit(&sutMenuSysSetup,apcPtr,FONT_MODE_16X16);
	}
}

void uiShowFactoryResponse(void){
	unsigned short key;
	
	key=uiMenuResponse(&sutMenuSysSetup);
	if(MKEY_VALUE_MENU==key){
		switch(sutMenuSysSetup.handle){
//			case 0://服务器设置
//				uISetNextStatus(UIS_MENU_SYS_SERVERPASS);
//				break;
//			case 1://版本升级
//				uISetNextStatus(UIS_MENU_SYS_VERSION);
//				break;
			case 0://CSQ查看
				uISetNextStatus(UIS_MENU_SYS_CSQ);
				break;
			case 1://设置mic增益
				uISetNextStatus(UIS_MENU_SYS_MIC);
				break;
			//case 4://耳机SPK增益
			//	uISetNextStatus(UIS_MENU_SYS_SPK);
			//	break;
			case 2://字库更新
				uISetNextStatus(UIS_MENU_SYS_FONT);
				break;
		}
		if(sutMenuSysSetup.handle<=2) uiPushStack(sutMenuSysSetup.handle);
	}else if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_SEL);
}
/*****************************工程设置结束***********************************/

/*****************************提示音设置开始********************************/
unsigned char noteSetTmp;
static void switchFlash(void){
	char info[30];
	unsigned short x,y,len;
	
	if(noteSetTmp==0) snprintf(info, sizeof(info), "关闭");
	else snprintf(info, sizeof(info), "打开");
	
	len=guiGetStrXLen((char *)info, FONT_MODE_16X16);
	x=(GLCD_WIDTH-len)/2;
	y=UI_CONTENT_SHOW_Y+(GLCD_HEIGHT-UI_CONTENT_SHOW_Y)/2-12;
	guiShowStr(x,y,info, FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
}
void uiShowNoteSel(char StatusUpdate){
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"提示音设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		noteSetTmp=newPara.KeySound;
		switchFlash();
		uiMenuShowBottomIndacitor("保存", "返回");
	}
}

void uiShowNoteSelResponse(void){
	unsigned short key=getKeyValue();
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_SEL);
	else if(MKEY_VALUE_MENU==key){
		getStackStruct()->ok_back=1;
		if(newPara.KeySound != noteSetTmp){
			newPara.KeySound=noteSetTmp;
		#ifndef ENABLE_PWM_BEEP
			if(noteSetTmp==0) msgAtSend("AT+TONES=0\r\n");
			else msgAtSend("AT+TONES=1\r\n");
		#endif
			sysIniSave("noteSel");
		}
		uISetNextStatus(UIS_MENU_SYS_SEL);
	}else if(MKEY_VALUE_DOWN || MKEY_VALUE_UP){
		if(noteSetTmp==0) noteSetTmp=1;
		else noteSetTmp=0;
		switchFlash();
	}
}
/*****************************提示音设置结束********************************/

/*****************************关机界面提示开始**********************************/
void uiShowShutDown(char update){
	if(update){
		lcdBackLightApi(1);
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"关机",UI_STATUS_BAR_HEIGH,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		guiShowMessageBox("确定关机?");
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor("确定", "取消");
	}
}
void uiShowShutDownResponse(void){
	unsigned short key=getKeyValue();

	if(MKEY_VALUE_ESC==key){
		if(sutApp.waitEscReleased==0) uISetNextStatus(UIS_STANDBY);
	}else if(MKEY_VALUE_MENU==key){
		MSG_INFO(1, "Power is off!");
		appSleepCtl(ASLEEP_PWR, 1);
	}
}
/*****************************关机界面提示结束**********************************/

/*****************************CSQ查看开始********************************/
void CSQShow(unsigned int exeInterval,char StatusUpdate){
	char info[30];
	static int g_iCSQ=-1,cnt=1000;
	int y=UI_CONTENT_SHOW_Y+(GLCD_HEIGHT-UI_CONTENT_SHOW_Y)/2-12;
	
	if(g_iCSQ!=sutApp.g_iCSQ || StatusUpdate){
		g_iCSQ=sutApp.g_iCSQ;
		snprintf(info, sizeof(info), "CSQ:%d  ", g_iCSQ);
		guiShowStr(GLCD_HEIGHT/2-24,y,info, FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
	}
	if(++cnt<(1500/exeInterval)) return;
	cnt=0;
	msgAtSend("AT+CSQ\r\n");
}
void uiShowCsqSel(char StatusUpdate,unsigned int exeInterval){
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"CSQ查看",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor(NULL, "返回");
	}
	CSQShow(exeInterval,StatusUpdate);
}

void uiShowCsqSelResponse(void){
	unsigned short key=getKeyValue();
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_FACTORY);
}
/*****************************CSQ查看结束********************************/
			
/*******************************MIC/SPK查看************************************/
unsigned char micSpkTmp;
void MicSpkShow(void){
	char info[30];
	unsigned short x,y,len;
	
	snprintf(info, sizeof(info), "%d ",micSpkTmp+1);
	
	len=guiGetStrXLen((char *)info, FONT_MODE_16X16);
	x=(GLCD_WIDTH-len)/2;
	y=UI_CONTENT_SHOW_Y+(GLCD_HEIGHT-UI_CONTENT_SHOW_Y)/2-12;
	guiShowStr(x,y,info, FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
}
void uiShowMicSel(char StatusUpdate){
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"耳机MIC增益",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor("确定", "返回");
		micSpkTmp=newPara.micGain;
		MicSpkShow();
	}
}

void uiShowMicSelResponse(void){
	unsigned short key=getKeyValue();
	if(MKEY_VALUE_DOWN==key){
		if(micSpkTmp==0) micSpkTmp=MIC_GAIN_NUM-1;
		else micSpkTmp--;
		MicSpkShow();
	}else if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_FACTORY);
	else if(MKEY_VALUE_MENU==key){
		if(micSpkTmp!= newPara.micGain){
			newPara.micGain=micSpkTmp;
			sysIniSave("micSel");
			if(sutApp.earLev!=0) VolMicUpdate();
		}
		getStackStruct()->ok_back=1;
		uISetNextStatus(UIS_MENU_SYS_FACTORY);
	}
}
void uiShowSpkSel(char StatusUpdate){
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"耳机SPK增益",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor("确定", "返回");
		micSpkTmp=newPara.spkGain;
		MicSpkShow();
	}
}

void uiShowSpkSelResponse(void){
	unsigned short key=getKeyValue();
	if(MKEY_VALUE_DOWN==key){
		if(micSpkTmp==0) micSpkTmp=SPK_GAIN_NUM-1;
		else micSpkTmp--;
		MicSpkShow();
	}else if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_FACTORY);
	else if(MKEY_VALUE_MENU==key){
		if(micSpkTmp!= newPara.spkGain){
			newPara.spkGain=micSpkTmp;
			sysIniSave("spkSel");
			if(sutApp.earLev!=0) VolSpkUpdate();
		}
		getStackStruct()->ok_back=1;
		uISetNextStatus(UIS_MENU_SYS_FACTORY);
	}
}
/******************************MIC/SPK查看结束*********************************/

/******************************fota更新生辟字库**********************************/
#include "lsapi_http.h"
#define FONT_16_FILE HZK_16_NEW_FILE
#define FONT_16_MD5  "HZK16_Ext_md5.txt"
#define FONT_12_FILE HZK_12_NEW_FILE
#define FONT_12_MD5  "HZK12_Ext_md5.txt"
LSAPI_OSI_Thread_t *fontThread=NULL;
short fontLoadStatus;
bool fontResult;
HttpInfoSet httpFont;
//return:false, not finished, true, done
//status:1:busy
//status:-1:get 16 file failed
//status:-2:16 file len err
//status:-3:16 file format err
//status:-4:16 ok, get 12 file failed
//status:-5:16 ok, get 12 file len err
//status:-6:16 ok, get 12 file fotmat err
//status:0 16,12 ok
bool httpFontGetStatus(short *status){//获取更新结果接口
	if(fontResult==true) *status=fontLoadStatus;
	return fontResult;
}
static void fontEntry(void *param);
bool httpFontGetStart(void){//开启更新接口
	fontResult=false;
	if(NULL != fontThread) return true;
	fontLoadStatus=-1;
	fontThread=LSAPI_OSI_ThreadCreate("lteEntry", fontEntry,NULL,LSAPI_OSI_PRIORITY_NORMAL,1024*10,4);
	if(NULL==fontThread) return false;
}
void fontSaveData(unsigned char *data, unsigned int len){
	int fd;
	char filename[30];
	if(data[0]==12){
		extFontFileCtl(data[0],false);
		snprintf(filename,sizeof(filename), "%s",FONT_12_FILE);
	}else if(data[0]==16){
		extFontFileCtl(data[0],false);
		snprintf(filename,sizeof(filename), "%s",FONT_16_FILE);
	}
	else return;
	fd=LSAPI_FS_Open(filename, LSAPI_FS_O_RDWR | LSAPI_FS_O_CREAT | LSAPI_FS_O_TRUNC,0x0);
	if(fd<0){
		extFontFileCtl(data[0],true);
		return;
	}
	LSAPI_FS_Write(fd, data, len);
	LSAPI_FS_Close(fd);
	extFontFileCtl(data[0],true);
}
bool checkFileMd5(char type, unsigned char *md5, unsigned int len){
	int fd;
	char filename[30];
	unsigned char rmd5[32];
	if(type==0)snprintf(filename,sizeof(filename), "%s",FONT_16_MD5);
	else if(type==1)snprintf(filename,sizeof(filename), "%s",FONT_12_MD5);
	else return false;
	fd=LSAPI_FS_Open(filename, LSAPI_FS_O_RDONLY,0);
	if(fd<0){
		MSG_WARN(1, "'%s' open failed to read", filename);
		return false;
	}
	LSAPI_FS_Read(fd, rmd5, sizeof(rmd5));
	LSAPI_FS_Close(fd);
	if(0==memcmp(rmd5, md5, len)) return true;
	else return false;
}
void fontSaveMd5(char type, unsigned char *md5, unsigned int len){
	int fd;
	char filename[30];
	if(type==0)snprintf(filename,sizeof(filename), "%s",FONT_16_MD5);
	else if(type==1)snprintf(filename,sizeof(filename), "%s",FONT_12_MD5);
	else return;
	fd=LSAPI_FS_Open(filename, LSAPI_FS_O_RDWR | LSAPI_FS_O_CREAT | LSAPI_FS_O_TRUNC,0);
	if(fd<0){
		MSG_WARN(1, "'%s' open failed to save", filename);
		return;
	}
	LSAPI_FS_Write(fd, md5, len);
	LSAPI_FS_Close(fd);
}

static void fontEntry(void *param){
	bool font12_noneed_update=true;
	bool font16_noneed_update=true;
	char type=0;
	unsigned int md5_len;
	unsigned char rmd5[32];
	bool needClear=true;
	//get 16 md5
	MSG_INFO(1,"try get 16 md5");
	memset(&httpFont, 0, sizeof(httpFont));httpFont.cid=1;
	snprintf(httpFont.url, sizeof(httpFont.url),"http://120.77.66.129/higos/extFonts/%s",FONT_16_MD5);
	if(LSAPI_HTTP_GET(&httpFont)){
    	fontLoadStatus=-2;
    	goto FONT_END;
  	}
	//ana 16 md5
	if(httpFont.recvlen!=32){
		fontLoadStatus=-3;
		goto FONT_END;
	}
	md5_len=httpFont.recvlen;
	memcpy(rmd5, httpFont.RecvData, md5_len);
	LSAPI_HTTP_ParaClear(&httpFont);
	font16_noneed_update=checkFileMd5(type, rmd5, md5_len);

	if(false==font16_noneed_update){
		MSG_INFO(1,"try get 16 file");
		//get 16 first
		memset(&httpFont, 0, sizeof(httpFont));httpFont.cid=1;
		snprintf(httpFont.url, sizeof(httpFont.url),"http://120.77.66.129/higos/extFonts/%s",FONT_16_FILE);
		if(LSAPI_HTTP_GET(&httpFont)){//尝试获取差分包
			fontLoadStatus=-4;
			goto FONT_END;
		}
		if(httpFont.recvlen<35){//1+[2+32]....
			fontLoadStatus=-5;
			goto FONT_END;
		}else if(httpFont.RecvData[0]!=16 || (httpFont.recvlen-1)%34){
			fontLoadStatus=-6;
			goto FONT_END;
		}

		fontSaveData(httpFont.RecvData, httpFont.recvlen);
		fontSaveMd5(type, rmd5, md5_len);
		LSAPI_HTTP_ParaClear(&httpFont);
	}
	type=1;
	//get 12 md5
	MSG_INFO(1,"try get 12 md5");
	memset(&httpFont, 0, sizeof(httpFont));httpFont.cid=1;
	snprintf(httpFont.url, sizeof(httpFont.url),"http://120.77.66.129/higos/extFonts/%s",FONT_12_MD5);
	if(LSAPI_HTTP_GET(&httpFont)){
    	fontLoadStatus=-7;
    	goto FONT_END;
  	}
	//ana 12 md5
	if(httpFont.recvlen!=32){
		fontLoadStatus=-8;
		goto FONT_END;
	}
	md5_len=httpFont.recvlen;
	memcpy(rmd5, httpFont.RecvData, md5_len);
	LSAPI_HTTP_ParaClear(&httpFont);
	font12_noneed_update=checkFileMd5(type, rmd5, md5_len);
	if(false==font12_noneed_update){
		MSG_INFO(1,"try get 12 file");
		//get 12 then
		memset(&httpFont, 0, sizeof(httpFont));httpFont.cid=1;
		snprintf(httpFont.url, sizeof(httpFont.url),"http://120.77.66.129/higos/extFonts/%s",FONT_12_FILE);
		if(LSAPI_HTTP_GET(&httpFont)){//尝试获取差分包
			fontLoadStatus=-9;
			goto FONT_END;
		}
		if(httpFont.recvlen<27){//1+[2+24]....
			fontLoadStatus=-10;
			goto FONT_END;
		}else if(httpFont.RecvData[0]!=12 || (httpFont.recvlen-1)%26){
			fontLoadStatus=-11;
			goto FONT_END;
		}
		fontSaveData(httpFont.RecvData, httpFont.recvlen);
		fontSaveMd5(type, rmd5, md5_len);
		LSAPI_HTTP_ParaClear(&httpFont);
		needClear=false;
	}else needClear=false;
	if(font12_noneed_update==true && font16_noneed_update==true) fontLoadStatus=0;
	else fontLoadStatus=1;
	FONT_END:
		fontThread=NULL;
		fontResult=true;
		if(needClear==true) LSAPI_HTTP_ParaClear(&httpFont);
		LSAPI_OSI_ThreadExit();
}

//6、UI接口界面(供参考)
char fontUpdateStatus=0;
void uiShowFontUpdate(char StatusUpdate){
	static unsigned int timer;
	char info[30];
	short status;
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"字库更新",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		fontUpdateStatus=0;
		guiShowMessageBox("确定更新?");
		uiMenuShowBottomLine();
		uiMenuShowBottomIndacitor("确定", "返回");
	}
	if(fontUpdateStatus==1){
		if(true==httpFontGetStatus(&status)){
			if(status==1){
				guiShowMessageBox("更新成功");
				uTimerStart(&timer, 2000);
			}else if(status==0){
				guiShowMessageBox("无需更新");
				uTimerStart(&timer, 2000);
			}else{
				snprintf(info,sizeof(info), "更新失败:%d",status);
				guiShowMessageBox(info);
				uTimerStart(&timer, 2000);
			}
			fontUpdateStatus=2;
		}
	}else if(fontUpdateStatus==2){
		if(uTimerExpired(&timer)){
			getStackStruct()->ok_back=1;
			uISetNextStatus(UIS_MENU_SYS_FACTORY);
		}
	}
}
void uiShowFontUpdateResponse(){
	unsigned short key=getKeyValue();
	if(fontUpdateStatus!=0) return;
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_FACTORY);
	else if(MKEY_VALUE_MENU==key){
		httpFontGetStart();
		fontUpdateStatus=1;
		guiShowMessageBox("正在更新");
	}
}
/******************************fota更新生辟字库结束***********************************/

#ifdef USE_LEFT_MOVING
/***************************主界面滚动显示**********************************/
#define MOVING_ITME_NUM 3          //显示三条项目
#define MAX_ROW_BYTE    (20+1+2)   //最多显示20个字节，10个中文
#define MAX_SHOW_BYTE   12         //最多一次性显示10个字节
void leftMoveStr(char *name, unsigned short len){
	char temp[3];
	unsigned char move=1;
	unsigned short i;
	if(name[0] > 0x80) move=2;
	for(i=0;i<move;i++) temp[i]=name[i];
	for(i=0;i<len-move;i++) name[i]=name[i+move];
	for(i=0;i<move;i++) name[i+len-move]=temp[i];
}
void getRealShow(char *des, char *src,int maxsize)
{//??è?×??à12+1??×??ú??ê?
	int i,j,cpsize=maxsize-1;
	for(i=0;i<cpsize;i++){
		if(src[i]>0x80){
			if(i+2>cpsize){//装不下了，停止
				break;
			}
			des[i]=src[i];
			des[i+1]=src[i+1];
			i++;
		}else des[i]=src[i];
	}
	des[i]=0;
}
void showbufdata(char type, unsigned char *data, int len){
	char info[100],buf[3];
	int i;
	sprintf(info, "D[%d]%c:",len,type);
	for(i=0;i<len;i++){
		sprintf(buf, "%02x",data[i]);
		strcat(info, buf);
	}
	MSG_INFO(1, info);
}
//除去标识(群组:/成员:/话权:)外的字节数,多的1字节用于加空格
void mainScreenShowMoving(unsigned short y, unsigned char reset,char *gname,char *uname,char *voicePri){
	unsigned char i;
	int j,len;
	unsigned short showX,showY;
	//显示缓存,最多显示7个中文
	const char indicators[MOVING_ITME_NUM][6]={
		"群组:","成员:","话权:",
	};
	static char item[MOVING_ITME_NUM][MAX_ROW_BYTE];
	static unsigned short itemSum[MOVING_ITME_NUM];
	unsigned short *sum,tsum;
	char *ptr,*showPtr;
	char showMax[MAX_ROW_BYTE];//用于临时存储条目全内容，判定是否发生变化
	char needMove;
	
	for(i=0;i<MOVING_ITME_NUM;i++){
		showX=1;
		showY=y+i*(12+8);//12x12高度，行间距2
		sum=&itemSum[i];
		showPtr=&item[i][0];
		switch(i){
			case 0://群组:默认群组
				snprintf(showMax, sizeof(showMax), "%s ",gname);
				break;
			case 1://成员:测试组1
				snprintf(showMax, sizeof(showMax), "%s ",uname);
				break;
			case 2://话权:空闲
				snprintf(showMax, sizeof(showMax), "%s ",voicePri);
				break;
		}
		
		ptr=showMax;
		len=strlen(ptr);
		//计算buff的sum
		tsum=0;
		for(j=0;j<len;j++) tsum += ptr[j];
		//检测是否需要移动处理
		if(len>MAX_SHOW_BYTE) needMove=1;
		else needMove=0;

		if(*sum != tsum || reset){
			guiClearRect(0, showY, GLCD_WIDTH-1, showY+16,guiGetBackColor());
			guiShowStr(showX, showY+2, &indicators[i][0], FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
		}
		showX += 30;
		
		if(needMove==0){
			if(*sum != tsum || reset){//内容发生了变化
				//只显示一次即可
				snprintf(showPtr, MAX_ROW_BYTE, "%s", ptr);
				guiClearRect(showX, showY, GLCD_WIDTH-1, showY+16,guiGetBackColor());
				guiShowStr(showX, showY, showPtr, FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
			}
		}else{//做移动处理
			if(*sum != tsum) memcpy(showPtr, ptr, MAX_ROW_BYTE);
			else leftMoveStr(showPtr, strlen(showPtr));
			getRealShow(showMax, showPtr,MAX_SHOW_BYTE);
			guiClearRect(showX, showY, GLCD_WIDTH-1, showY+16,guiGetBackColor());
			guiShowStr(showX,showY, showMax, FONT_MODE_16X16, REVERSED_NO, COLOR_BLACK, guiGetBackColor());
		}

		*sum=tsum;
	}
}
#endif

/*****************************提示音设置开始********************************/
#define LOCK_MODE_NUM 2
void uiShowLockUpdate(char StatusUpdate){
	static const char *lockMode[LOCK_MODE_NUM+1]={
		"锁按键",
		"锁按键+PTT",
		""
	};
	char Features[LOCK_MODE_NUM];
	unsigned char i;
	if(StatusUpdate){
		guiClearAll(guiGetBackColor());
		guiShowCaption(0,"键锁设置",UI_STATUS_ITEM_Y+1,guiGetBackColor(),guiGetForeColor(),FONT_MODE_16X16);
		uiMenuShowBottomLine();
		for(i=0;i<LOCK_MODE_NUM;i++){
			if(i==newPara.lockType) Features[i]=1;
			else Features[i]=0;
		}
		ListBoxInit(&sutListBox,lockMode,0,commonIcon2,Features,0);
		uiMenuShowBottomIndacitor("保存", "返回");
	}
}

void uiShowLockUpdateResponse(void){
	unsigned short key=ListBoxResponse(&sutListBox);
	if(MKEY_VALUE_ESC==key) uISetNextStatus(UIS_MENU_SYS_SEL);
	else if(MKEY_VALUE_MENU==key){
		getStackStruct()->ok_back=1;
		if(newPara.lockType != sutListBox.handle){
			newPara.lockType=sutListBox.handle;
			sysIniSave("lock");
		}
		uISetNextStatus(UIS_MENU_SYS_SEL);
	}
}
/*****************************提示音设置结束********************************/