LC_D29V_ZZD/app/board.h

#ifndef __BOARD_H_
#define __BOARD_H_
#include "stdbool.h"
#include "lsapi_os.h"


#define MAX_SPK_VOL 9

#define KEY_TIMER_TICK 30
#define KS_ALL_IDLE 0
//组合键值，用于底层处理使用
typedef enum{
	MKEY_VALUE_0=0,
	MKEY_VALUE_1=1,	
	MKEY_VALUE_2=2,
	MKEY_VALUE_3=3,
	MKEY_VALUE_4=4,
	MKEY_VALUE_5=5,
	MKEY_VALUE_6=6,
	MKEY_VALUE_7=7,
	MKEY_VALUE_8=8,  //加制将MIC_PTT放进来，放到最后吧
	MKEY_VALUE_13=13,  //加制将MIC_PTT放进来，放到最后吧
	MKEY_VALUE_NONE=15//不使用
}MKEY_VALUEENUM;

typedef enum{
	ENCODE_IDLE,
	ENCODE_SHUN=1,
	ENCODE_NI=2
}ENCODE_DIRECTION;



#define MKEY_VALUE_PTT  (1<<MKEY_VALUE_3)
#define MKEY_VALUE_F1   (1<<MKEY_VALUE_6)
#define MKEY_VALUE_F2  	(1<<MKEY_VALUE_5)

#define MKEY_VALUE_MENU (1<<MKEY_VALUE_2)  //短按确认，长按锁屏

#define MKEY_VALUE_UP (1<<MKEY_VALUE_4)

#define MKEY_VALUE_DOWN (1<<MKEY_VALUE_13)  //菜单键/下一项键
#define MKEY_VALUE_ESC 	(1<<MKEY_VALUE_0)


#define MKEY_VALUE_CB_GT (MKEY_VALUE_MENU | MKEY_VALUE_ESC)
#define MKEY_VALUE_CB_IP (MKEY_VALUE_ESC | MKEY_VALUE_DOWN)

#define MKEY_VALUE_MIC_PTT (1<<MKEY_VALUE_8)

#define MKEY_VALUE_CB_PTT (MKEY_VALUE_PTT|MKEY_VALUE_MIC_PTT)

#define CTL_LCD_BL(bit)   lcdBackList(bit) ////
#define CTL_POWER_HOLD(bit) pwrHoldCtl(bit)//暂时无控制，当前电池直接驱动了

#define TONE_NORMAL		880
#define TONE_SPECIAL	880
void redLedCtl(bool onoff);
void greenLedCtl(bool onoff);
void spkCtl(bool onoff);
void lcdBackList(char onoff);
void pwrHoldCtl(bool onoff);

void msgAtSend(char *at);
void msgAtSends(char *at ,int len);

void boardInit(void);
void usbOutPut(unsigned char *info, int len);
unsigned int getAppTick(void);
void keySendEvent(unsigned short key, unsigned char keyType);
void encodeSendEvent(unsigned short encode);

void stopKeyTimer(void);
void paControl(bool status);
unsigned short getKeyValue();
unsigned short SetZeroKeyValue();

void startBackLightTimer(int time);
void pttBeepStart(bool isMicReq);
void beepStart(int freq);
void VibCtrl(bool statue);
void VibStart(char time);
//extern LSAPI_OSI_Timer_t *BleTimer_t;







#endif