/** ****************************************************************************** * @file hk32f103x_eval.h * @author MCD Application Team * @version V4.5.0 * @date 07-March-2011 * @brief This file contains definitions for STM3210B_EVAL's Leds, push-buttons * COM ports, SD Card (on SPI), sFLASH (on SPI) and Temperature sensor * LM75 (on I2C) hardware resources. ****************************************************************************** * @attention * * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * *

© COPYRIGHT 2011 STMicroelectronics

****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __HK32F103X_EVAL_H #define __HK32F103X_EVAL_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f10x_spi.h" #include "stm32f10x_i2c.h" /** @addtogroup Utilities * @{ */ /** @addtogroup STM32_EVAL * @{ */ /** @defgroup STM32_EVAL_Exported_Types * @{ */ typedef enum { LED0 = 0, LED1 = 1, } Led_TypeDef; typedef enum { BUTTON_WAKEUP = 0, BUTTON_KEY0 = 1, BUTTON_KEY1 = 2, } Button_TypeDef; typedef enum { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } ButtonMode_TypeDef; typedef enum { COM1 = 0, COM2 = 1 } COM_TypeDef; /** @addtogroup STM3210B_EVAL_LOW_LEVEL * @{ */ /** @defgroup STM3210B_EVAL_LOW_LEVEL_Exported_Types * @{ */ /** * @} */ /** @defgroup STM3210B_EVAL_LOW_LEVEL_Exported_Constants * @{ */ /** @addtogroup STM3210B_EVAL_LOW_LEVEL_LED * @{ */ #define LEDn 2 #define LED0_PIN GPIO_Pin_12 #define LED0_GPIO_PORT GPIOC #define LED0_GPIO_CLK RCC_APB2Periph_GPIOC #define LED1_PIN GPIO_Pin_2 #define LED1_GPIO_PORT GPIOD #define LED1_GPIO_CLK RCC_APB2Periph_GPIOD /** * @} */ /** @addtogroup STM3210B_EVAL_LOW_LEVEL_BUTTON * @{ */ #define BUTTONn 3 /** * @brief Wakeup push-button */ #define WAKEUP_BUTTON_PIN GPIO_Pin_0 #define WAKEUP_BUTTON_GPIO_PORT GPIOA #define WAKEUP_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOA #define WAKEUP_BUTTON_EXTI_LINE EXTI_Line0 #define WAKEUP_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOA #define WAKEUP_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource0 #define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn /** * @brief Key0 push-button */ #define KEY0_BUTTON_PIN GPIO_Pin_5 #define KEY0_BUTTON_GPIO_PORT GPIOC #define KEY0_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOC #define KEY0_BUTTON_EXTI_LINE EXTI_Line5 #define KEY0_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOC #define KEY0_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource5 #define KEY0_BUTTON_EXTI_IRQn EXTI9_5_IRQn /** * @brief Key1 push-button */ #define KEY1_BUTTON_PIN GPIO_Pin_15 #define KEY1_BUTTON_GPIO_PORT GPIOA #define KEY1_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOA #define KEY1_BUTTON_EXTI_LINE EXTI_Line15 #define KEY1_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOA #define KEY1_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource15 #define KEY1_BUTTON_EXTI_IRQn EXTI15_10_IRQn /** * @} */ /** @addtogroup STM3210B_EVAL_LOW_LEVEL_COM * @{ */ #define COMn 2 /** * @brief Definition for COM port1, connected to USART1 */ #define EVAL_COM1 USART1 #define EVAL_COM1_CLK RCC_APB2Periph_USART1 #define EVAL_COM1_TX_PIN GPIO_Pin_9 #define EVAL_COM1_TX_GPIO_PORT GPIOA #define EVAL_COM1_TX_GPIO_CLK RCC_APB2Periph_GPIOA #define EVAL_COM1_RX_PIN GPIO_Pin_10 #define EVAL_COM1_RX_GPIO_PORT GPIOA #define EVAL_COM1_RX_GPIO_CLK RCC_APB2Periph_GPIOA #define EVAL_COM1_IRQn USART1_IRQn /** * @brief Definition for COM port2, connected to USART2 (USART2 pins remapped on GPIOD) */ #define EVAL_COM2 USART2 #define EVAL_COM2_CLK RCC_APB1Periph_USART2 #define EVAL_COM2_TX_PIN GPIO_Pin_5 #define EVAL_COM2_TX_GPIO_PORT GPIOD #define EVAL_COM2_TX_GPIO_CLK RCC_APB2Periph_GPIOD #define EVAL_COM2_RX_PIN GPIO_Pin_6 #define EVAL_COM2_RX_GPIO_PORT GPIOD #define EVAL_COM2_RX_GPIO_CLK RCC_APB2Periph_GPIOD #define EVAL_COM2_IRQn USART2_IRQn /** * @} */ /** @addtogroup STM3210B_EVAL_LOW_LEVEL_SD_SPI * @{ */ /** * @brief SD SPI Interface pins */ #define SD_SPI SPI1 #define SD_SPI_CLK RCC_APB2Periph_SPI1 #define SD_SPI_SCK_PIN GPIO_Pin_5 /* PA.05 */ #define SD_SPI_SCK_GPIO_PORT GPIOA /* GPIOA */ #define SD_SPI_SCK_GPIO_CLK RCC_APB2Periph_GPIOA #define SD_SPI_MISO_PIN GPIO_Pin_6 /* PA.06 */ #define SD_SPI_MISO_GPIO_PORT GPIOA /* GPIOA */ #define SD_SPI_MISO_GPIO_CLK RCC_APB2Periph_GPIOA #define SD_SPI_MOSI_PIN GPIO_Pin_7 /* PA.07 */ #define SD_SPI_MOSI_GPIO_PORT GPIOA /* GPIOA */ #define SD_SPI_MOSI_GPIO_CLK RCC_APB2Periph_GPIOA #define SD_CS_PIN GPIO_Pin_12 /* PC.12 */ #define SD_CS_GPIO_PORT GPIOC /* GPIOC */ #define SD_CS_GPIO_CLK RCC_APB2Periph_GPIOC #define SD_DETECT_PIN GPIO_Pin_7 /* PE.07 */ #define SD_DETECT_GPIO_PORT GPIOE /* GPIOE */ #define SD_DETECT_GPIO_CLK RCC_APB2Periph_GPIOE /** * @} */ /** @addtogroup STM3210B_EVAL_LOW_LEVEL_M25P_FLASH_SPI * @{ */ /** * @brief M25P FLASH SPI Interface pins */ #define sFLASH_SPI SPI1 #define sFLASH_SPI_CLK RCC_APB2Periph_SPI1 #define sFLASH_SPI_SCK_PIN GPIO_Pin_5 /* PA.05 */ #define sFLASH_SPI_SCK_GPIO_PORT GPIOA /* GPIOA */ #define sFLASH_SPI_SCK_GPIO_CLK RCC_APB2Periph_GPIOA #define sFLASH_SPI_MISO_PIN GPIO_Pin_6 /* PA.06 */ #define sFLASH_SPI_MISO_GPIO_PORT GPIOA /* GPIOA */ #define sFLASH_SPI_MISO_GPIO_CLK RCC_APB2Periph_GPIOA #define sFLASH_SPI_MOSI_PIN GPIO_Pin_7 /* PA.07 */ #define sFLASH_SPI_MOSI_GPIO_PORT GPIOA /* GPIOA */ #define sFLASH_SPI_MOSI_GPIO_CLK RCC_APB2Periph_GPIOA #define sFLASH_CS_PIN GPIO_Pin_4 /* PA.04 */ #define sFLASH_CS_GPIO_PORT GPIOA /* GPIOA */ #define sFLASH_CS_GPIO_CLK RCC_APB2Periph_GPIOA /** * @} */ /** @addtogroup STM3210B_EVAL_LOW_LEVEL_TSENSOR_I2C * @{ */ /** * @brief LM75 Temperature Sensor I2C Interface pins */ #define LM75_I2C I2C1 #define LM75_I2C_CLK RCC_APB1Periph_I2C1 #define LM75_I2C_SCL_PIN GPIO_Pin_6 /* PB.06 */ #define LM75_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */ #define LM75_I2C_SCL_GPIO_CLK RCC_APB2Periph_GPIOB #define LM75_I2C_SDA_PIN GPIO_Pin_7 /* PB.07 */ #define LM75_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */ #define LM75_I2C_SDA_GPIO_CLK RCC_APB2Periph_GPIOB #define LM75_I2C_SMBUSALERT_PIN GPIO_Pin_5 /* PB.05 */ #define LM75_I2C_SMBUSALERT_GPIO_PORT GPIOB /* GPIOB */ #define LM75_I2C_SMBUSALERT_GPIO_CLK RCC_APB2Periph_GPIOB #define LM75_I2C_DR ((uint32_t)0x40005410) #define LM75_DMA_CLK RCC_AHBPeriph_DMA1 #define LM75_DMA_TX_CHANNEL DMA1_Channel6 #define LM75_DMA_RX_CHANNEL DMA1_Channel7 #define LM75_DMA_TX_TCFLAG DMA1_FLAG_TC6 #define LM75_DMA_RX_TCFLAG DMA1_FLAG_TC7 /** * @} */ /** * @} */ /** @defgroup STM3210B_EVAL_LOW_LEVEL_Exported_Macros * @{ */ /** * @} */ /** @defgroup STM3210B_EVAL_LOW_LEVEL_Exported_Functions * @{ */ void STM_EVAL_LEDInit(Led_TypeDef Led); void STM_EVAL_LEDOn(Led_TypeDef Led); void STM_EVAL_LEDOff(Led_TypeDef Led); void STM_EVAL_LEDToggle(Led_TypeDef Led); void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode); uint32_t STM_EVAL_PBGetState(Button_TypeDef Button); void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct); void SD_LowLevel_DeInit(void); void SD_LowLevel_Init(void); void sFLASH_LowLevel_DeInit(void); void sFLASH_LowLevel_Init(void); void LM75_LowLevel_DeInit(void); void LM75_LowLevel_Init(void); /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM3210B_EVAL_H */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ /******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/