/****************************************Copyright (c)****************************************************
**                                      
**                                 http://www.powermcu.com
**
**--------------File Info---------------------------------------------------------------------------------
** File name:               main.c
** Descriptions:            The UCOSII application function
**
**--------------------------------------------------------------------------------------------------------
** Created by:              AVRman
** Created date:            2010-11-9
** Version:                 v1.0
** Descriptions:            The original version
**
**--------------------------------------------------------------------------------------------------------
** Modified by:             
** Modified date:           
** Version:                 
** Descriptions:            
**
*********************************************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "includes.h"

/**********************************************************************************************************
*                                                main()
*
* Description : This is the standard entry point for C code.  It is assumed that your code will call
*               main() once you have performed all necessary initialization.
*
* Argument(s) : none.
*
* Return(s)   : none.
**********************************************************************************************************/


void PwrLock(void)
{
	GPIO_InitTypeDef GPIO_InitStructure;
	
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO,ENABLE);
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
	
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB|RCC_APB2Periph_GPIOC, ENABLE);
	GPIO_InitStructure.GPIO_Speed=GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode=GPIO_Mode_Out_PP;
	
	GPIO_InitStructure.GPIO_Pin=GPIO_Pin_8;
	GPIO_Init(GPIOB, &GPIO_InitStructure);
	//USB SWITCH
	GPIO_InitStructure.GPIO_Pin=GPIO_Pin_13;
	GPIO_Init(GPIOC, &GPIO_InitStructure);
	GPIOC->BSRR=GPIO_Pin_13;

	//key power

	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Pin=KEY_POWER_PIN;//3
	GPIO_Init(KEY_POWER_PORT, &GPIO_InitStructure);

}


#define FLASH_BASE            ((uint32_t)0x08000000) 
#define MAIN_CONFIG_ADDR 		 (FLASH_BASE+126*1024) 

int sutProductParaPSN=0;


void ShowMcuFreq(void)
{
	char buf[40];
	RCC_ClocksTypeDef clk;
	RCC_GetClocksFreq(&clk);
	//SysTick_Config(clk.SYSCLK_Frequency / 100);
	printf("SYSCLK=%d,PCLK1=%d,PCLK2=%d,HCLK=%d\r\n",clk.SYSCLK_Frequency,clk.PCLK1_Frequency,clk.PCLK2_Frequency,clk.HCLK_Frequency);
}

int main (void)
{
	Uart1Init();
	if (SysTick_Config(SystemCoreClock / 100)){ //100
    	while (1);
  }
	PwrLock();
	W25Q64_Init();
	FileSysInit();
	//IapTrace(IAP_VERSION_NAME);
	g_ucRand=GetRandBySTM32ID();
	memset(&sutMsg,0,sizeof(SUT_MSG));
	NewTask(TASK_WAIT);
	ShowMcuFreq();
	CheckPwrKeyOn();
	//NewTask(TASK_DL_APP);
	//CopyFileInit();
	while(1)
	{
		if(sutMsg.Uart1Recv){ //Use for PC
			Uart1Msg();
			g_usRx1Len=0;
			sutMsg.Uart1Recv=0;
			g_usRx1In=0;
			memset(IapRxBuf,0,sizeof(IapRxBuf));
		}
		
		if(sutMsg.TaskStart){
			sutMsg.TaskStart=0;
			StartMsg();
		}
		if(sutMsg.Tick10ms){
			sutMsg.Tick10ms=0;
			TickMsg();	
		}
		if(sutMsg.Tick500ms){
			sutMsg.Tick500ms=0;
			Tick500Msg();
		}
	}
	return (0);
}

//void assert_failed(uint8_t* file, uint32_t line)
//{

//	printf("[AF]f:%s,l:%d\r\n",file,line);
//	while (1)
//	{}
//}

/*********************************************************************************************************
      END FILE
*********************************************************************************************************/