Q800_M5700_BND/app/app.c

#include "includes.h"
#include "lsapi_tts.h"

//17903920
//219782401
#define APP_IDLE_TIME 3 		//如果POC已休眿APP没有操作一定秒数后休眠
int keyNum=0;
APP_DEF sutApp;

static void KeyToneDly();


static void appDataInit(void){
	memset((unsigned char *)&sutApp, 0, sizeof(APP_DEF));
	sutApp.pcant=4;
	sutApp.enableKey=1;
	//appSleepCtl(ASLEEP_POC, 1);
	appSleepCtl(ASLEEP_LCD, 1);
	readInfoNow();
	sysIniRead();
}

void dataInit(void){
	appDataInit();
	pocDataInit();
	gpsDataInit();
	uiDataInit();
}

static void ledsProCtl(void){

	if(sutApp.gtMode!=0) return;
	if(0==sutPocStatus.logined) uioStatusSet(UIO_INDOFFLINE);
	else if(sutPocStatus.spk>0)uioStatusSet(UIO_INDRX);
	else if(sutPocStatus.mic>0 )uioStatusSet(UIO_INDTX);
	else uioStatusSet(UIO_INDONLINE);

}

static void adcRead(unsigned int interval);
char isKeyPress(void){
	if(keyNum) return keyNum--;
	else return 0;
}
/*APP休眠处理接口
ctlType, 操作对象
status,操作值，0 清除 else 设置
*/
void appSleepCtl(ASLEEP_ENUM ctlType, char status){
	if(status==0) sutApp.appSleepStatus &= ~(1<<ctlType);
	else sutApp.appSleepStatus |= 1<<ctlType;
}
/*APP休眠状态接叿*/
char isAppSleepReady(void){
	if(sutApp.appSleepStatus==0) return 1;
	else return 0;
}
/*获取指定休眠控制成员锁定的状怿
0 未锁宿否则锁定，锁定即可以休眠
*/
char getAppObjStatus(ASLEEP_ENUM ctlType){
	if(sutApp.appSleepStatus & (1<<ctlType)) return 1;
	else return 0;
}
/*检测是否APP可以休眠操作*/
char isSleepReady(void){
	static unsigned int idleCnt=0;
#ifdef DISABLE_SLEEP
	return 0;//不休眿
#endif
	if(isAppSleepReady()==0){
		idleCnt=0;
		return 0;
	}
	
	if(++idleCnt>=(APP_IDLE_TIME*1000/APP_SUB_DIV_TIME)){
		idleCnt=0;
		return 1;
	}else return 0;
}

void usbCmdHandler(const char *data,unsigned int length){
	static char buf[256];
	static int len=0;
	static char lach;
	char ch;
	int i;

	if(sutApp.authReady==0){
		authRecvPro(data, length);
		return;
	}
	
	for(i=0;i<length;i++){
		ch=data[i];
		if(len<sizeof(buf)-1) buf[len++]=ch;
		else{
			len=0;
			buf[len++]=ch;
		}
		if(lach=='\r' && ch=='\n'){
			buf[len]=0;
			cmdSetting(buf);
			len=0;
		}
		lach=ch;
	}
}

static char micPttPressed=0;
static char pttPressed=0;

static void pttHandler(char type, char ctl){
	char needSend=0;
	char mic_spk;
	if(type==0){//ptt
		if(ctl==0){//放开
			if(micPttPressed==0){
				needSend=1;mic_spk=0;
			}
			pttPressed=0;
		}else{//按下
			if(pttPressed==0 && micPttPressed==0){
				needSend=1;mic_spk=1;
			}
			pttPressed=1;
		}
	}else{//mic ptt
		if(ctl==0){//放开
			if(pttPressed==0){
				needSend=1;mic_spk=0;
			}
			micPttPressed=0;
		}else{//按下
			if(pttPressed==0 && micPttPressed==0){
				needSend=1;mic_spk=1;
			}
			micPttPressed=1;
		}
	}
	if(needSend!=0){
		if(mic_spk==0) {
			#ifndef USE_BND_POC
			msgAtSend("AT+POC=0C0000\r\n");
			#else 
			broad_speak(0);
			#endif
		}
		else {
			#ifndef USE_BND_POC
			msgAtSend("AT+POC=0B0000\r\n");
			#else 
			broad_speak(1);
			#endif
		}
	}
}

/*打印键信恿*/
const char freeSeg[]="Free";
const char pressSeg[]="Press";
void showKeyMessage(unsigned short key,unsigned char status){
	char buf[50]="[Key_";
	switch(key){
		case MKEY_VALUE_F2:	strcat(buf, "F2]");break;
		case MKEY_VALUE_F1:	strcat(buf, "F1]");break;
		case MKEY_VALUE_PTT:	strcat(buf, "PTT]");break;
		case MKEY_VALUE_MENU:	strcat(buf, "MENU]");break;
		case MKEY_VALUE_UP:	strcat(buf, "UP]");break;
		case MKEY_VALUE_DOWN:	strcat(buf, "DOWN]");break;
		case MKEY_VALUE_ESC:	strcat(buf, "ESC]");break;
		case MKEY_VALUE_PWR:	strcat(buf, "PWR]");break;
		case MKEY_VALUE_CB_GT:	strcat(buf, "CB_GT]");break;
		case MKEY_VALUE_CB_IP:	strcat(buf, "CB_IP]");break;
		case MKEY_VALUE_MIC_PTT: strcat(buf, "MIC_PTT]");break;
		default:return;
	}
	if(status==0) strcat(buf, freeSeg);
	else strcat(buf, pressSeg);
	MSG_INFO(1,buf);
}
unsigned char keyInArow=0;
void keyCheck(unsigned short keyStatus){
	static unsigned short lkey=0;
	static unsigned char keyCtl=0,keyCnt=0;
	unsigned char keyType,needSendKey=0;

	if(keyStatus==KS_ALL_IDLE){
		keyType=0;
		if(keyCtl==1){
			keyCtl=0;
			needSendKey=1;
		}
	}else{
		keyType=1;
		if(lkey != keyStatus) keyCtl=0;//值变匿
		if(keyCtl==0){
			lkey=keyStatus;
			keyCtl=1;
			keyCnt=0;
			needSendKey=1;
		}else if(keyInArow!=0){//是否输出持续倿
			if(++keyCnt>=(1000/KEY_TIMER_TICK)){//每秒产生持续倿
				keyCnt=0;
				needSendKey=1;
			}
		}
	}
	
	if(needSendKey){
		if(sutApp.enableKey!=0)//延时期间不检测按锿
			keySendEvent(lkey,keyType);
	}
}
bool lcdBackLightStatus=false;

void pwrDetRead(char type){
	static char cnt=0;

	if(type==0){
		cnt++;
		if(cnt==3)uISetNextStatus(UIS_MENU_SHUT_PWR);
	}else{
		cnt=0;
	}
	
	if(sutUIstatus.Status == UIS_MENU_SHUT_PWR) return;//关机界面不处理
	if(type==0) return;//
	//处理按顶部键切换UI
	uiTimeOutToStandby(1,APP_SUB_DIV_TIME);
	//处理按顶部键切换背光
	if(sutUIstatus.Status != UIS_STANDBY) return;//待机页面时才反转背光
	
	if(lcdBackLightStatus==false) backLightReset();
	else lcdBackLightApi(0);//熄屏
}

void lcdBackLightApi(char value){
	CTL_LCD_BL(value);
	if(value==0) lcdBackLightStatus=false;
	else lcdBackLightStatus=true;
}


static void lockProcess(void){
	if(sutApp.keyLock==0){
		sutApp.keyLock=1;
		appSleepCtl(ASLEEP_GGROUP, 0);
		appSleepCtl(ASLEEP_GUSER, 0);
		uISetNextStatus(UIS_STANDBY);
	}else{
		sutApp.keyLock=0;
		sutApp.lockShow=0;
	}
}
void keyToneStart(void){
	if(newPara.KeySound==0) return;
    sutPocStatus.beep=1;
	paControl(true);
	if(ToneThreadPtr!=NULL)threadSendEvent(ToneThreadPtr,OHPOC_EVENT_MAIN,NULL,NULL,NULL);//0702

}
void quickUiSwitch(int uistatus){
	uISetNextStatus(uistatus);
	getStackStruct()->FastUiChange=1;
}
/*进入GT模式*/
static void enterGTMode(void){
#ifndef ENABLE_PWM_BEEP
	msgAtSend("AT+TONES=1\r\n");
#endif
	sutApp.gtMode=1;
	uioStatusSet(UIO_INDGT);
	paControl(true);//GT下常开喇叭	
#ifdef ENABLE_PWM_BEEP
	pwmBeepStart(868,50);
	LSAPI_OSI_ThreadSleep(100);
	pwmBeepStart(500,50);
	LSAPI_OSI_ThreadSleep(100);
	pwmBeepStart(868,50);
#else
	msgAtSend("AT+TONE\r\n");
	LSAPI_OSI_ThreadSleep(200);
	msgAtSend("AT+TONE\r\n");
#endif
	MSG_WARN(1, "Enter GT Mode");
}
void micPttHandler(char status){
	keySendEvent(MKEY_VALUE_MIC_PTT,status);
}



#define MKEY_VALUE_F2  	(1<<MKEY_VALUE_7)
#define MKEY_VALUE_F1   (1<<MKEY_VALUE_5)
#define MKEY_VALUE_PTT  (1<<MKEY_VALUE_1)
#define MKEY_VALUE_MENU (1<<MKEY_VALUE_2)
#define MKEY_VALUE_UP  	(1<<MKEY_VALUE_3)
#define MKEY_VALUE_DOWN (1<<MKEY_VALUE_6)
#define MKEY_VALUE_ESC 	(1<<MKEY_VALUE_4)
#define MKEY_VALUE_PWR 	(1<<MKEY_VALUE_8)


void ResetKeyValue(unsigned char *value){
		
	if(*value==1){
		*value=0;
		pttHandler(1,0);
	}
}


void keyHandler(unsigned short key,unsigned char status){//普通按键值处琿
static unsigned char gtModeCnt=0;
	static unsigned char lockCnt=0;
	static unsigned char Once_PTT=0;
	  char str[20]={0};
	  
	if(sutApp.keyLock!=0 && MKEY_VALUE_ESC!=key&&MKEY_VALUE_MIC_PTT!=key&&MKEY_VALUE_PTT!=key){
		sutApp.lockShow=1;
		return;
	}


	showKeyMessage(key,status);
	
//	if(key&MKEY_VALUE_MIC_PTT||key&MKEY_VALUE_MIC_PTT)return;

	if(status==0){//key free
		switch(key){
			case MKEY_VALUE_MIC_PTT:
				pttHandler(0,0);
				break;
			case MKEY_VALUE_PTT:
				Once_PTT=0;
				pttHandler(1,0);
				break;
			case MKEY_VALUE_PWR:
				pwrDetRead(1);
				break;
			case MKEY_VALUE_ESC:
//				MSG_INFO(1,"BND -palat===%s",str);	
				lockCnt=0;
				break;
			
//			case MKEY_VALUE_UP:
//				if(sutUIstatus.Status!=UIS_MENU_SYS_SERVERPASS) sutApp.voluemUpdate=1;
//				break;	
//			case MKEY_VALUE_DOWN:
//				if(sutUIstatus.Status!=UIS_MENU_SYS_SERVERPASS) sutApp.voluemUpdate=2;
//				break;
			case MKEY_VALUE_F2:
				if(sutApp.key_f2_cnt==1) quickUiSwitch(UIS_MENU_USER_SEL);
				sutApp.key_f2_cnt=0;
				break;
			case MKEY_VALUE_CB_GT:
				gtModeCnt=0;
				break;
			
			default:
				MSG_INFO(1,"ResetKeyValue-----%08X-",key);
				ResetKeyValue(&Once_PTT);//HYL
				break;
		}
		sutApp.timeOutCnt=0;
		keyInArow=0;
		appSleepCtl(ASLEEP_MKEY, 0);
	
	}else{//key press
		if(key!=MKEY_VALUE_PTT&& key!=MKEY_VALUE_MIC_PTT && key!=MKEY_VALUE_CB_GT ) keyToneStart();
		
		if(MKEY_VALUE_PWR != key) backLightReset();
		appSleepCtl(ASLEEP_MKEY, 1);
		keyNum++;
		switch(key){
			case MKEY_VALUE_MIC_PTT:
				pttHandler(0,1);
				break;
			case MKEY_VALUE_PTT:
				Once_PTT=1;
				pttHandler(1,1);
				break;
			case MKEY_VALUE_PWR:
				keyInArow=1;
				pwrDetRead(0);
				break;
			case MKEY_VALUE_ESC:
				
				keyInArow=1;
				if(++lockCnt==3) lockProcess();
				break;
			case MKEY_VALUE_F1:
				quickUiSwitch(UIS_MENU_GROUP_SEL);
				break;
			case MKEY_VALUE_F2:
				keyInArow=1;
				if(++sutApp.key_f2_cnt==3) quickUiSwitch(UIS_MENU_SYS_SIM);
				break;
			case MKEY_VALUE_CB_GT:
				keyInArow=1;
				if(++gtModeCnt==3){
					if(sutApp.gtMode==0){
						enterGTMode();
					}
				}
				break;
			case MKEY_VALUE_CB_IP:
				keyInArow=1;
				break;
			case MKEY_VALUE_MENU:
			case MKEY_VALUE_UP:
			case MKEY_VALUE_DOWN:
				break;	
			default:
			
				break;

		}
	}
}

/////////////////////////////事件发送接叿//////////////////////////
void threadSendEvent(LSAPI_OSI_Thread_t *threadID, unsigned int id, unsigned int param1,unsigned int param2,unsigned int param3){
	LSAPI_OSI_Event_t pEventSend;

	pEventSend.id=id;
	pEventSend.param1=param1;
	pEventSend.param2=param2;
	pEventSend.param3=param3;
	osiEventTrySend(threadID,&pEventSend,0);
}

//////////////////////////////其它处理接口//////////////////////////
static void adcRead(unsigned int interval){

	static unsigned int siVbat=0,laSiVbat;
	static unsigned char MIC_ptt=0;
	static unsigned char LastMIC_ptt=0;
	static unsigned short cnt=0,lcnt=0;
	unsigned int adcValueTmp;
	
	if(++cnt<(1000/interval)) return;//1秒读一次ADC即可
	cnt=0;
	
	LSAPI_SYS_BattGetVol(&adcValueTmp);

	//MSG_WARN(1,"Low power:%d mv",adcValueTmp/10 );
	if(sutApp.g_iBAT<=MIN_PWR_LEVEL){
		MSG_WARN(1,"Low power:%d", lcnt++);
		if(lcnt>=10){
			MSG_INFO(1, "Low power ,shut");
			sutApp.lowPwrMsg=1;
			appSleepCtl(ASLEEP_PWR, 1);
		  }
	 }else lcnt=0;

	sutApp.g_iBAT=adcValueTmp/10;
		if(sutApp.g_iBAT != laSiVbat){
			laSiVbat=sutApp.g_iBAT;
	 }
		/**********************应用播放TONE2秒后关闭喇叭************************************/
		 KeyToneDly();

	
}
/*处理UI操作*/
static void uiProcess(unsigned int exeInterval){
	if(getAppObjStatus(ASLEEP_PWR) != 0) return;//关机后，不切换菜单，只显示关机页靿
	uiLoop(exeInterval);
	uiResponse(exeInterval);
}

/*触发关机操作*/
static void pwrShutPro(void){

	static char shutFlag=0;
	if(getAppObjStatus(ASLEEP_PWR) == 0) return;
	//CTL_LCD_BL(1);
	lcdBackLightApi(1);
	msgAtSend("AT+POC=050000\r\n");
	msgAtSend("AT+CFUN=0\r\n");
	if(shutFlag==0){
		//显示关机界面
		if(sutApp.lowPwrMsg==0) guiShowMessageBox("正在关机");
		else guiShowMessageBox("低压关机");
		shutFlag=1;
		LSAPI_OSI_ThreadSleep(1000);
	}
	
	MSG_INFO(1, "Normal PwrOff");
	//msgAtSend("AT+TRB=1\r\n");//normal power off   当前固件先不发模块关机指令，否则断电再上电有可能是起不来皿
	//LSAPI_OSI_ThreadSleep(1000);//一秒后释放电源锿防止软关机不成功
	CTL_LCD_BL(0);
	MSG_INFO(1, "Release pwr");
	guiFillRect(0,0,GLCD_WIDTH-1,GLCD_HEIGHT-1,guiGetBackColor());//防止下次开机能看到残留
	CTL_POWER_HOLD(0);
	msgAtSend("AT+CPOF\r\n");//软件关机模块
	LSAPI_OSI_ThreadSleep(100);
}
static void NoteCheck(int interval){

	const char *LOWPOWERNOTE="\xE8\xAF\xB7\xE5\x85\x85\xE7\x94\xB5";
	if(sutApp.lowPwrWarn!=0){
		sutApp.lowPwrCnt += interval;
		
		if(sutApp.lowPwrCnt>=WARN_TTS_INTERVAL){
			sutApp.lowPwrCnt=0;
			//ttsPlay(ENCODE_USER_GBK, "C7EBB3E4B5E7");
			broad_play_tts(LOWPOWERNOTE,true);
		}
	}
	
}
void AntModeRun(void){
#ifdef ENABLE_ANT_MODE
	guiShowMessageBox("调天线模式");
	for(;;){
		LSAPI_OSI_ThreadSleep(2000);
	}
#endif
}
void Ear_Judge(){

LSAPI_HeadSetStatus_t status;

status= LSAPI_Device_HeadSetGetStatus();//0628
	
	  if(status == LSAPI_HEADSET_DISCONNECT)
	  {
		  MSG_INFO(1,"headset_disconnect");    
		  handsetStatusOutput(1);
	  }
	  else if(status == LSAPI_HEADSET_CONNECT)
	  {
		  MSG_INFO(1," headset_connect");
		  handsetStatusOutput(0);
	  }
	  else
	  {
		  MSG_INFO(1,"unknow state");
	  }
}


void APP_ls_PdpActive(){

	LSAPI_OSI_Event_t event = {0};
	unsigned res = 0;
	uint8_t nState = 1;
    uint8_t nCid = 1;
	uint8_t nSim = 0;

	res = LSAPI_NET_GprsAct(nState, nCid, nSim, &event);
	MSG_INFO(1,"LSAPI_NET_GprsAct event.id(%d)", event.id);
	MSG_INFO(1,"LSAPI_NET_GprsAct res(%d)", res);
	
	if (1 == res)
	{
	    MSG_INFO(1,"LSAPI_NET_GprsAct cid(%d) active succ", nCid);	
		LSAPI_NET_GET_GprsNetIf();
	}
	else
	{
        MSG_INFO(1,"LSAPI_NET_GprsAct cid(%d) active fail", nCid);
	}

}



#define SHOUHU_CNT 5
void ShouHuProcess(int interva) 
{
	static int nRet=0;
	static char regcnt=0;
	int  tmepAtt_state=0;
	static int cnt=0;
	int nActstate = 0;
	static char  lastNetif=0;
	char Netif=0;
	

	if(++cnt<(SHOUHU_CNT*1000/interva)) return;
	cnt=0;	

	nRet=LSAPI_NET_GetGprsAttState(&tmepAtt_state); 

	if(nRet!=0){
		MSG_WARN(1,"Get REG status failed");
		return;
	}

	////////////////////////检测并打开PDP/////////////////////////////
	nRet = LSAPI_NET_GetGprsActState(&nActstate);
	if (nActstate != 1)
	{
		APP_ls_PdpActive();	
		lastNetif=0;
	}
	else
	{
		   if(LSAPI_NET_GET_GprsNetIf() == FALSE)
		   {
		        MSG_INFO(1,"sock netif failed\n");
		        LSAPI_NET_NetIf_Create();
		   }
		   else
		   {
		        MSG_INFO(1,"sock success\n");
		   	}
	
		//MSG_INFO(1,"LS GprsActState has been ACTIVED");
	}

	
	if(tmepAtt_state!=1){
  		//if(LastAtt_state!=tmepAtt_state)MSG_WARN(1,"REG off");
		if(regcnt==60/SHOUHU_CNT){	
			MSG_WARN(1,"!!!!CFUN=0");
			msgAtSend("AT+CFUN=0\r\n");
			backLightReset();
			sutPocStatus.firstLogin=0;
		}else if(regcnt>=65/SHOUHU_CNT){
			MSG_WARN(1,"!!!!CFUN=1");
			msgAtSend("AT+CFUN=1\r\n");
			regcnt=0;
		}
		++regcnt;
		sutApp.RegNetOK=0;
	}else {
		regcnt=0;
		sutApp.RegNetOK=1;
	}
}





void HeartTickSend(int interva)
{
	static int cnt=0;
	//unsigned int  HertTime=0;
	const char PwrList[3]={25,45,5};	
	if(++cnt<(PwrList[newPara.pwrMode]*1000/interva)) return;
	cnt=0;
	broad_send_ping();
	MSG_INFO(1,"BND HeartTick");
}
//30秒 无人呼叫自动退出单呼
void BNDAutoExitDanhu(int interva)
{
	static int cnt=0;
	if(sutPocStatus.danHuStatus==0)return;
	if(sutPocStatus.mic||sutPocStatus.spk){
		cnt=0;
		return;
	}
	if(++cnt<(30*1000/interva)) return;
	cnt=0;
	broad_leavegroup();
}

//开机配置设定好的模块音频参数文件
#define READ_PER_SIZE 400 //每次从Bin文件读取最多400字节来发送，AT时长度翻倍
static void configureVoiceParam(void){
	//const char *confiFile="ZT-MINI101HGS.bin";
	//const char *confiFile="ZT-MINI201-202HGS-20210703.bin";
	const char *confiFile="Q-800KTV.bin";
	unsigned char sendbuf[40+2*400];//AT+CAIET=0,0,9600,400,""
	unsigned char *dataPtr=sendbuf+sizeof(sendbuf)-READ_PER_SIZE;
	char buf[3];
	char status=0;
	int fd,offset,readsize,i;
	LSAPI_FS_Stat_info_t pBuf;
	MSG_INFO(1, "config audio file'%s'",confiFile);
	fd=LSAPI_FS_Open(confiFile, LSAPI_FS_O_RDONLY,0x0);
	if(fd>0){
		memset(&pBuf,0,sizeof(pBuf));
		LSAPI_FS_Fstat(fd,&pBuf);
		offset=0;
		LSAPI_FS_Seek(fd, offset, LSAPI_FS_SEEK_SET);
		while(offset<pBuf.st_size){
			readsize=pBuf.st_size-offset;
			if(readsize>400) readsize=400;
			readsize=LSAPI_FS_Read(fd, dataPtr, readsize);
			if(readsize==0) break;
			else if(readsize<0){
				status=1;
				break;
			}
			sprintf(sendbuf, "AT+CAIET=0,0,%d,%d,\"", offset, readsize);
			for(i=0;i<readsize;i++){
				sprintf(buf, "%02x", dataPtr[i]);
				strcat(sendbuf, buf);
			}
			strcat(sendbuf,"\"\r\n");
			msgAtSend(sendbuf);
			offset += readsize;
			LSAPI_OSI_ThreadSleep(10);
		}
		LSAPI_FS_Close(fd);
		if(status==0) MSG_INFO(1, "config audio file succ:%d",offset);
		else MSG_ERR(1, "config audio failed %d",status);
	}else MSG_ERR(1, "'%s' open failed",confiFile);
}




static void paProCtl(void);
static void subTimerCtl(unsigned char sleep_or_not);

LSAPI_CellLocation_t nCellInfo[max_neighbor_cellbun];


void LbsTask(void* param){
	while(1){
		LSAPI_OSI_ThreadSleep(5000);//1000
		if(sutApp.RegNetOK==0||getAppObjStatus(ASLEEP_LCD)==0)continue;//
		//先获取主小区信息
		memset(nCellInfo,0x00,sizeof(nCellInfo));
		LSAPI_NET_CellInfo(nCellInfo,LSAPI_pCurrCellInfo,0);	
	}

}




 int lib_oem_device_bts(int* mcc,int* mnc,int* lac, int* cid){
	 int tmp_mcc = 0;
	 int tmp_mnc = 0;
	 int tmp_lac = 0;
	 int tmp_cid = 0;
	 char buf[10]={0};
/*	 
   tmp_mcc |= (nCellInfo[0].sMcc[0] & 0xff) <<8;
   tmp_mcc |= (nCellInfo[0].sMcc[1] & 0xff) <<4;
   tmp_mcc |= (nCellInfo[0].sMcc[2]& 0xff);
   */
 	snprintf(buf, sizeof(buf),"%d%d%d",nCellInfo[0].sMcc[0],nCellInfo[0].sMcc[1],nCellInfo[0].sMcc[2]);
	tmp_mcc=htoi(buf); 
 if(tmp_mcc==0)return -1;
   MSG_INFO(1,"tmp_mcc==%x",tmp_mcc);
   
   tmp_mnc |= (nCellInfo[0].sMnc[0] & 0xff) <<4;
   tmp_mnc |= (nCellInfo[0].sMnc[1] & 0xff) ;
  // tmp_mnc |= (nCellInfo[0].sMnc[2]& 0xff);
	
/*
 if(nCellInfo[0].sMnc[2] != 0x0F){
	  	snprintf(buf, sizeof(buf),"%d%d%d",nCellInfo[0].sMnc[0],nCellInfo[0].sMnc[1],nCellInfo[0].sMnc[2]);
  		tmp_mnc=htoi(buf);
  		MSG_INFO(1,"tmp_mnc==%x",tmp_mnc); 

 }else{
	 snprintf(buf, sizeof(buf),"%d%d",nCellInfo[0].sMnc[0],nCellInfo[0].sMnc[1]);
  		tmp_mnc=htoi(buf);
  		MSG_INFO(1,"tmp_mnc==%x",tmp_mnc); 
	
 }
  // if(tmp_mnc==0)return -1;

 */
  	tmp_lac=nCellInfo[0].sLac;
	MSG_INFO(1,"tmp_lac==%d",tmp_lac);
	tmp_cid=nCellInfo[0].sCellID;
	MSG_INFO(1,"tmp_cid==%d",tmp_cid);
	
	 *mcc=tmp_mcc;
	 *mnc=tmp_mnc;
	 *lac= tmp_lac;
	 *cid=tmp_cid;

	 return 0;
 }

 void LBS_Pth()
{
	if(NULL==LSAPI_OSI_ThreadCreate("LBS_Pth", LbsTask, NULL, LSAPI_OSI_PRIORITY_NORMAL, LBS_TASK_THREAD_STACK, 10)){
			MSG_INFO(1,"LBS_Pth task failed");
	} 
	
}

void Lbs_Sendto_bnd(){

	
	if(sutApp.RegNetOK==0){
			//lbs vail
			return;
	}
	broad_request_lbs_info(GLCD_WIDTH,GLCD_HEIGHT-UI_CONTENT_SHOW_Y+8,0,0);//多下载8为了裁剪上方标签

	MSG_INFO(1,"get lbs_info");
}


/****************************复制通道0的参数到通道1中***********************/

void apnCopyHandle(int dly){
	static unsigned short cnt=0xfff;
	if(sutApp.apnCopyDone!=0) return;
	if(++cnt<(1000/dly)) return;
	cnt=0;
	msgAtSend("AT+CGDCONT?\r\n");
}



#define APP_NEED_SLEEP OSI_MAKE_TAG('S', 'E', 'L', 'P')

void ls_suspend(void *ctx, osiSuspendMode_t mode)
{
  MSG_INFO(1,"\n\r ls_suspend mode:%d\n",mode);
}

void ls_resume(void *ctx, osiSuspendMode_t mode, uint32_t source)
{
  MSG_INFO(1,"\n\r ls_resume mode:%d,source:%d\n",mode,source); 
}



osiPmSourceOps_t sleep_ops = 
{
    ls_suspend,
    ls_resume,
    NULL,
    NULL
};


void appRun(void){
	
	char cnt=0;
	LSAPI_OSI_Event_t event={0};
	const char *huanying="\xE6\xAC\xA2\xE8\xBF\x8E\xE4\xBD\xBF\xE7\x94\xA8\xE5\x85\xAC\xE7\xBD\x91\xE5\xAF\xB9\xE8\xAE\xB2\xE6\x9C\xBA";
	osiPmSource_t*App_osiPmSource_t=NULL;
	App_osiPmSource_t=osiPmSourceCreate(APP_NEED_SLEEP, &sleep_ops, NULL);
	osiPmWakeLock(App_osiPmSource_t); //拿住资源不让系统休眠
	//等待lcd初始化完
	MSG_INFO(1, "wait lcd init");
	while(sutApp.guiStatus==0){LSAPI_OSI_ThreadSleep(50);}//是否检测超时？
	AntModeRun();
	localAuthNow();
  	open_bnd_app();
	msgAtSend("AT+SIMCROSS?\r\n");
	Ear_Judge();
	backLightReset();
	//LSAPI_TTS_Play
	msgAtSend("ATI\r\n");
	configureVoiceParam();	
	broad_play_tts(huanying,true);//播报欢迎使用
	while(sutApp.cardStatus==0){
	msgAtSend("AT+CCID\r\n");
	 LSAPI_OSI_ThreadSleep(1000);
		if(++cnt>=5){
		MSG_INFO(1, "Check card timeout");
		break;
	 }
	}
	msgAtSend("ATE0\r\n");
	LBS_Pth();
	//newPara.lcdParaDefaultIndex=4
	for(;;){
		volUpdateNeed();
		ledsProCtl();
		adcRead(APP_SUB_DIV_TIME);
		uiProcess(APP_SUB_DIV_TIME);
		//gpsProCtl(APP_SUB_DIV_TIME);
		pocProCtl(APP_SUB_DIV_TIME);
		NoteCheck(APP_SUB_DIV_TIME);
		uiTimeOutToStandby(0, APP_SUB_DIV_TIME);
		ShouHuProcess(APP_SUB_DIV_TIME);
		apnCopyHandle(APP_SUB_DIV_TIME);
		//BNDAutoExitDanhu(APP_SUB_DIV_TIME);
		HookGroupUserInfo();
		HookVolToutCheck();
		//IncomingSMS();
		if(isSleepReady()==0) LSAPI_OSI_ThreadSleep(APP_TASK_SLEEP_TIME);
		else if(sutApp.gtMode==0){//正常模式下可以休眿
			MSG_WARN(1, "APP SLEEP");
			osiPmWakeUnlock(App_osiPmSource_t); //释放资源
			uiTimeOutToStandby(1, APP_SUB_DIV_TIME);
			stopKeyTimer();
			subTimerCtl(1);//切换为休眠状态定时器
			sutApp.appStatus=1;
			redLedCtl(false);//休眠后保证灯没亮，否则有可能灯亮10ms，按理10ms后灯能灭，然后10ms时休眠了，应用就短时间内不会灭灯
			greenLedCtl(false);//休眠后保证灯没亮
			LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &event);
			osiPmWakeLock(App_osiPmSource_t);
			LSAPI_OSI_ThreadSleep(150);//添加这个后，休眠时按键或被呼叫或本机呼叫，tone音能是完整的
			lcdDrv_Init(1);//深度休眠唤醒后重新初始化SPI-LCD
			if(sutApp.lcdDlyLightUp){
				sutApp.lcdDlyLightUp=0;
				CTL_LCD_BL(1);
			}
			sutApp.forceUiFlash=1;
			sutApp.appStatus=0;
			subTimerCtl(0);//切换为唤醒状态定时器
			MSG_WARN(1, "APP WAKEUP");
		}
		//检测是否关机，这里要放在唤醒后操作
		pwrShutPro();
	}
	broad_free();
}

unsigned int subTimerInterval=100;//定时器定时的时间
LSAPI_OSI_Timer_t *pSubtimer_t = NULL;
/*
为了做低功耗，此定时器在休眠时，设置为长时间定旿
非休眠时，设置为短时间定旿
sleep_or_not:0 未休眠， else 休眠
*/
static void subTimerCtl(unsigned char sleep_or_not){
	if(NULL==pSubtimer_t){
		MSG_WARN(1, "subTimer null");
		return;
	}
	LSAPI_OSI_TimerStop(pSubtimer_t);
	//打开定时噿
	if(sleep_or_not==0) subTimerInterval=100;//未休眠时＿00ms
	else subTimerInterval=5000;//休眠旿5000ms
	LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
}
static void subTimeroutcallback(void *param){
	unsigned int *dlyTime=(unsigned int *)param;
    //处理灯的显示
  	uioProctl(*dlyTime);
  	//控制功放的关闿
  	paProCtl();
	if(sutApp.bndPocDone==1){
		HeartTickSend(subTimerInterval);
		BNDAutoExitDanhu(subTimerInterval);
	}
	if(NULL!=pSubtimer_t) LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
}

void subTask(void *param){
	LSAPI_OSI_Event_t event={0};
	if(NULL==pSubtimer_t) pSubtimer_t = LSAPI_OSI_TimerCreate(LSAPI_OSI_ThreadCurrent(), subTimeroutcallback, (void *)&subTimerInterval);
	if(NULL==pSubtimer_t) MSG_WARN(1,"sub timer init failed");
	else LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
	for(;;){LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &event);}
	
}

static void paProCtl(void){
	//会被定时调用
	if(sutPocStatus.TTS!=0) return;
	if(sutPocStatus.spk!=0) return;
	if(sutPocStatus.TONE!=0) return;
	if(sutPocStatus.beep!=0) return;
	if(sutApp.gtMode!=0) return;
	paControl(false);
	//MSG_INFO(1,"spk off");
}
void tryWakeupApp(void){
	if(sutApp.appStatus!=0){
		if(mainThreadPtr!=NULL){
			threadSendEvent(mainThreadPtr,OHPOC_EVENT_MAIN,NULL,NULL,NULL);
		}
	}                                                                                                                       
}
void ttsPlay(ENCODE_USER_ENUM type, char *tts){

		int len,i;
		char ttsMessage[20*4];
		char Playbuf[40]={0};
		unsigned char codeType=ENCODE_USER_GBK;
		if(newPara.ttsMessage[0]==0) return;
		len=strlen(newPara.ttsMessage);
		len = len+(8-len%8);//
		MSG_INFO(1,"tts->");
		if(type==ENCODE_USER_UNICODE_BE) 
		{
			codeType=LSAPI_TTS_UNICODE_BIG;
			for(i=0;i<len;i+=4){	
				/*
				ttsMessage[i]=newPara.ttsMessage[i+2];
				ttsMessage[i+1]=newPara.ttsMessage[i+3];
				ttsMessage[i+2]=newPara.ttsMessage[i];
				ttsMessage[i+3]=newPara.ttsMessage[i+1];
				*/
				ttsMessage[i]=newPara.ttsMessage[i];
				ttsMessage[i+1]=newPara.ttsMessage[i+1];
				ttsMessage[i+2]=newPara.ttsMessage[i+2];
				ttsMessage[i+3]=newPara.ttsMessage[i+3];

				MSG_INFO(0,"%c",ttsMessage[i]);
				MSG_INFO(0,"%c",ttsMessage[i+1]);
				MSG_INFO(0,"%c",ttsMessage[i+2]);
				MSG_INFO(0,"%c",ttsMessage[i+3]);
				
			}
			ttsMessage[len-1]=0;
			StrAsciiToHex(ttsMessage,Playbuf);
			//MSG_INFO(1,"");
		}else if(type==ENCODE_USER_GBK) {
			codeType=LSAPI_TTS_GBK;
			StrAsciiToHex(newPara.ttsMessage,Playbuf);
			MSG_INFO(1, "tts Play:%d,%s",codeType,tts);
		}else if(type==ENCODE_USER_ASCII){
			codeType=LSAPI_TTS_GBK;
			strncpy(Playbuf, tts, strlen(tts));
		}
	paControl(true);
	sutPocStatus.TTS=1;	
	LSAPI_TTS_Play(Playbuf,strlen(Playbuf),codeType);
}

/*背光时间到，熄灭*/
void backLightCb(void *param){
	if(sutPocStatus.firstLogin==0) return;//未登录过，不灭屏
	if(newPara.lcdParaList[newPara.lcdParaDefaultIndex]==0) return;//常亮
	CTL_LCD_BL(0);
	lcdBackLightApi(0);
	appSleepCtl(ASLEEP_LCD, 0);//可以休眠
}
/*点亮背光*/
void backLightReset(void){
	unsigned short tmp;
	appSleepCtl(ASLEEP_LCD, 1);//不让休眠
	tmp=newPara.lcdParaList[newPara.lcdParaDefaultIndex];
	if(sutApp.appStatus==0) {
		lcdBackLightApi(1);
		CTL_LCD_BL(1);//未休眠时，直接点亮
	}else sutApp.lcdDlyLightUp=1;//休眠时不马上亮亮，会在LCD初始化完后点亮
	
	startBackLightTimer(tmp*1000);
}
void sysPwrLock(void){
	sutApp.pwrLock=1;
}
void sysPwrRlease(void){
	sutApp.pwrLock=0;
}
//"3132" --> 0x31,0x32
void StrAsciiToHex(char *src, unsigned char *des){
	unsigned char temp[2],i;
	if(strlen(src)%2) return;
	while(0!=*src)
	{
		for(i=0;i<2;i++)
		{
			temp[i] = *src++;
			if(temp[i] >= '0' && temp[i] <= '9') temp[i] -= 0x30;
			else if(temp[i] >= 'A' && temp[i] <= 'F') temp[i] -= 0x37;
			else temp[i] -= 0x57;
		}
		temp[0] <<= 4;
		temp[0] &= 0xf0;
		*des++=temp[0]|temp[1];
	}
	*des=0;
}

#if(USE_PA==NEW_PA)
	const unsigned char spkVolTable[MAX_SPK_VOL+1]={0,20,30,40,50,60,70,80,90};//不接耳机时喇叭音
#else
	const unsigned char spkVolTable[MAX_SPK_VOL+1]={0,10,20,30,40,50,60,70,80};//不接耳机时喇叭音
#endif

void spkVolumeSet(unsigned char level){
	char info[30];
	snprintf(info, sizeof(info), "AT+CLVL=%d\r\n", level);	
	msgAtSend(info);
#if(USE_PA==NEW_PA)
	broad_set_vol(BND_TTS, level/15);
	broad_set_vol(BND_TONE, level/15);
#else
	broad_set_vol(BND_TTS, level/25);
	broad_set_vol(BND_TONE, level/25);
#endif
	
}
/*调节音量，刷新音量进度条*/
void volAdjAction(char direction,unsigned char UIStatus){
	int vol;
	if(direction==0){
		if(newPara.spkVol<MAX_SPK_VOL) newPara.spkVol++;
		else goto FLASH;
	}else if(direction==1){
		if(newPara.spkVol>0) newPara.spkVol--;
		else goto FLASH;
	}
	/*
	spkVolumeSet(newPara.spkVol*10);
	MSG_INFO(1,"SPK_VOL:%d",newPara.spkVol*10);
	*/
	spkVolumeSet(spkVolTable[newPara.spkVol]);
	MSG_INFO(1,"SPK_VOL:%d",spkVolTable[newPara.spkVol]);
	vol=broad_get_vol(BND_VOICE);
	MSG_INFO(1,"voice_VO1L:%d",vol);
	vol=broad_get_vol(BND_TTS);
	MSG_INFO(1,"tts_VOL2:%d",vol);
	vol=broad_get_vol(BND_TONE);
	MSG_INFO(1,"tone_VOL3:%d",vol);
	sysIniSave();
	//刷新进度条
	FLASH:
	if(UIS_STANDBY==UIStatus)volUiFlash(newPara.spkVol);

}


void volUpdateNeed(void){
	if(sutApp.voluemUpdate==0) return;
	if(sutApp.voluemUpdate==1) volAdjAction(0, sutUIstatus.Status);
	else if(sutApp.voluemUpdate==2) volAdjAction(1, sutUIstatus.Status);
	sutApp.voluemUpdate=0;
}



 static void KeyToneDly()
{
	static unsigned char Cnt=0;
	if(sutPocStatus.beep){
		if(++Cnt>1){
			Cnt=0;
			sutPocStatus.beep=0;
		}
	}else Cnt=0;
}