#ifndef __BOARD_H_
#define __BOARD_H_
#include "stdbool.h"

#define MAX_SPK_VOL 8

#define KEY_TIMER_TICK 30
#define KS_ALL_IDLE 0
//组合键值，用于底层处理使用
typedef enum{
	MKEY_VALUE_1=1,
	MKEY_VALUE_2=2,
	MKEY_VALUE_3=3,
	MKEY_VALUE_4=4,
	MKEY_VALUE_5=5,
	MKEY_VALUE_6=6,
	MKEY_VALUE_7=7,
	MKEY_VALUE_8=8,  //加制将MIC_PTT放进来，放到最后吧
	MKEY_VALUE_9=9,
	MKEY_VALUE_NONE=15//不使用
}MKEY_VALUEENUM;

#define MKEY_VALUE_PTT  (1<<MKEY_VALUE_3)
#define MKEY_VALUE_F1   (1<<MKEY_VALUE_6)
#define MKEY_VALUE_F2  	(1<<MKEY_VALUE_NONE)
#define MKEY_VALUE_MENU (1<<MKEY_VALUE_7)  //短按确认，长按锁屏
#define MKEY_VALUE_DOWN (1<<MKEY_VALUE_2)  //菜单键/下一项键
#define MKEY_VALUE_ESC 	(1<<MKEY_VALUE_1)

#define MKEY_VALUE_UP  	(1<<MKEY_VALUE_9)

#define MKEY_VALUE_CB_GT (MKEY_VALUE_F1|MKEY_VALUE_ESC)//(MKEY_VALUE_MENU | MKEY_VALUE_ESC)
#define MKEY_VALUE_CB_IP (MKEY_VALUE_ESC | MKEY_VALUE_DOWN)

#define MKEY_VALUE_MIC_PTT (1<<MKEY_VALUE_8)

#define MKEY_VALUE_CB_PTT (MKEY_VALUE_PTT|MKEY_VALUE_MIC_PTT)

#define CTL_LCD_BL(bit)   lcdBackList(bit) ////暂时未有控制，电源直接点亮了，需要后面改硬件搞个IO来控制
#define CTL_POWER_HOLD(bit) pwrHoldCtl(bit)//暂时无控制，当前电池直接驱动了

#define TONE_NORMAL		880
#define TONE_SPECIAL	880
void redLedCtl(bool onoff);
void greenLedCtl(bool onoff);
void spkCtl(bool onoff);
void lcdBackList(char onoff);
void pwrHoldCtl(bool onoff);

void msgAtSend(char *at);
void msgAtSends(char *at ,int len);

void boardInit(void);
void usbOutPut(unsigned char *info, int len);
unsigned int getAppTick(void);
void keySendEvent(unsigned short key, unsigned char keyType);
void stopKeyTimer(void);
void paControl(bool status);
unsigned short getKeyValue();
void startBackLightTimer(int time);
void pttBeepStart(bool isMicReq);
void beepStart(int freq);

#endif