X2-LS-GWSD/X2_LS_GWSD.si4project/Backup/app(5566).c

#include "includes.h"

#define APP_IDLE_TIME 3 		//如果POC已休眿APP没有操作一定秒数后休眠
int keyNum=0;
APP_DEF sutApp;

static void appDataInit(void){
	memset((unsigned char *)&sutApp, 0, sizeof(APP_DEF));
	sutApp.updateStatusBar=1;
	sutApp.g_iBAT=-1;
	sutApp.copstype=-1;
	sutApp.pcant=4;
	sutApp.enableKey=1;
	appSleepCtl(ASLEEP_POC, 1);
	appSleepCtl(ASLEEP_LCD, 1);
	readInfoNow();
	sysIniRead();
}

void dataInit(void){
	appDataInit();
	pocDataInit();
	gpsDataInit();
	uiDataInit();
}

static void ledsProCtl(void){
	if(sutApp.gtMode!=0) return;
	if(0==sutPocStatus.logined) uioStatusSet(UIO_INDOFFLINE);
	else if(sutPocStatus.spk>0)uioStatusSet(UIO_INDRX);
	else if(sutPocStatus.mic>0 )uioStatusSet(UIO_INDTX);
	else uioStatusSet(UIO_INDONLINE);
}

static void adcRead(unsigned int interval);
char isKeyPress(void){
	if(keyNum) return keyNum--;
	else return 0;
}
/*APP休眠处理接口
ctlType, 操作对象
status,操作值，0 清除 else 设置
*/
void appSleepCtl(ASLEEP_ENUM ctlType, char status){
	if(status==0) sutApp.appSleepStatus &= ~(1<<ctlType);
	else sutApp.appSleepStatus |= 1<<ctlType;
}
/*APP休眠状态接叿*/
char isAppSleepReady(void){
	if(sutApp.appSleepStatus==0) return 1;
	else return 0;
}
/*获取指定休眠控制成员锁定的状怿
0 未锁宿否则锁定，锁定即可以休眠
*/
char getAppObjStatus(ASLEEP_ENUM ctlType){
	if(sutApp.appSleepStatus & (1<<ctlType)) return 1;
	else return 0;
}
/*检测是否APP可以休眠操作*/
char isSleepReady(void){
	static unsigned int idleCnt=0;
#ifdef DISABLE_SLEEP
	return 0;//不休眿
#endif
	if(isAppSleepReady()==0){
		idleCnt=0;
		return 0;
	}
	
	if(++idleCnt>=(APP_IDLE_TIME*1000/APP_SUB_DIV_TIME)){
		idleCnt=0;
		return 1;
	}else return 0;
}

void usbCmdHandler(const char *data,unsigned int length){
	static char buf[256];
	static int len=0;
	static char lach;
	char ch;
	int i;

	if(sutApp.authReady==0){
		//authRecvPro(data, length);
		return;
	}
	
	for(i=0;i<length;i++){
		ch=data[i];
		if(len<sizeof(buf)-1) buf[len++]=ch;
		else{
			MSG_WARN(1, "USB Buf Over");
			len=0;
			buf[len++]=ch;
		}
		if(lach=='\r' && ch=='\n'){
			buf[len]=0;
			cmdSetting(buf);
			len=0;
		}
		lach=ch;
	}
}

static void pttHandler(char type, char ctl){
#if 1//主PTT， 耳机PTT以及组合PTT都可以触发，即矩阵驱动时，任何一个按下如果没发请麦，则发请麦，只要有一个放开，则直接发放麦指令。因为组合按放后，放开，只有一个放开键值出来
	static char micPttPressed=0;
	static char pttPressed=0;
	static char maxPressed=0;
	if(type==0){//ptt
		if(ctl==0){//free
			pttPressed=0;
		}else{//press
			pttPressed=1;
		}
	}else if(type==1){//mic ptt
		if(ctl==0){//free
			micPttPressed=0;
		}else{//press
			micPttPressed=1;
		}
	}else if(type==2){//mic ptt
		if(ctl==0){//free
			maxPressed=0;
		}else{//press
			maxPressed=1;
		}
	}else return;
	
	if(ctl==0){//free
		if(pttPressed==0 || micPttPressed==0 || maxPressed==0){
			sutApp.pttReq=0;
			pttPressed=0;micPttPressed=0;maxPressed=0;
			msgAtSend("AT+POC=0C0000\r\n");
		}
	}else{//press
		if(pttPressed || micPttPressed || maxPressed){
			if(sutApp.pttReq==0){
				sutApp.pttReq=1;
				msgAtSend("AT+POC=0B0000\r\n");
			}
		}
	}
	
#else
	static char micPttPressed=0;
	static char pttPressed=0;
	char needSend=0;
	char mic_spk;
	if(type==0){//ptt
		if(ctl==0){//放开
			if(micPttPressed==0){
				needSend=1;mic_spk=0;
			}
			pttPressed=0;
		}else{//按下
			if(pttPressed==0 && micPttPressed==0){
				needSend=1;mic_spk=1;
			}
			pttPressed=1;
		}
	}else if(type==1){//mic ptt
		if(ctl==0){//放开
			if(pttPressed==0){
				needSend=1;mic_spk=0;
			}
			micPttPressed=0;
		}else{//按下
			if(pttPressed==0 && micPttPressed==0){
				needSend=1;mic_spk=1;
			}
			micPttPressed=1;
		}
	}
	
	if(needSend!=0){
		if(mic_spk==0) msgAtSend("AT+POC=0C0000\r\n");
		else msgAtSend("AT+POC=0B0000\r\n");
	}
#endif
}

/*打印键信恿*/
const char freeSeg[]="Free";
const char pressSeg[]="Press";
void showKeyMessage(unsigned short key,unsigned char status){
	char buf[50]="[Key_";
	switch(key){
		case MKEY_VALUE_F2:	strcat(buf, "F2]");break;
		case MKEY_VALUE_F1:	strcat(buf, "F1]");break;
		case MKEY_VALUE_PTT:	strcat(buf, "PTT]");break;
		case MKEY_VALUE_MENU:	strcat(buf, "MENU]");break;
		case MKEY_VALUE_UP:	strcat(buf, "UP]");break;
		case MKEY_VALUE_DOWN:	strcat(buf, "DOWN]");break;
		case MKEY_VALUE_ESC:	strcat(buf, "ESC]");break;
		case MKEY_VALUE_CB_GT:	strcat(buf, "CB_GT]");break;
		case MKEY_VALUE_CB_IP:	strcat(buf, "CB_IP]");break;
		case MKEY_VALUE_MIC_PTT: strcat(buf, "MIC_PTT]");break;
		case MKEY_VALUE_CB_PTT: strcat(buf, "MAX_PTT]");break;
		default: return;
	}
	if(status==0) strcat(buf, freeSeg);
	else strcat(buf, pressSeg);
	MSG_INFO(1,buf);
}

/*
龙尚矩阵驱动有一个问题:先按A不放，检测到A按下，再按B不放，检测到B按下，同时放开，概率只检测到B放开，A没检测到
规避方式:键值发生变化时，如果上次的键值大于等于2，直接清掉键值。
*/
void assistantCheck(unsigned short key){
	unsigned int i,j,w;
	static unsigned short lkey=0;
	if(lkey==key) return;
	
	j=0;
	for(i=0;i<16;i++){//上次键值置位的个数
		if(lkey & (1<<i)) j++;
	}
	w=0;
	for(i=0;i<16;i++){//本次键值置位的个数
		if(key & (1<<i)) w++;
	}
	
	if(j>=2 && j>w){//上一次至少两个键按下，现在发生变化,至少一个键放开了，全键清除
		lkey=0;
		clearKeyValue();
	}
	lkey=key;
}
unsigned char keyInArow=0;
void keyCheck(unsigned short keyStatus){
	static unsigned short lkey=0;
	static unsigned char keyCtl=0,keyCnt=0;
	unsigned char keyType,needSendKey=0;
	assistantCheck(keyStatus);
	if(keyStatus==KS_ALL_IDLE){
		keyType=0;
		if(keyCtl==1){
			keyCtl=0;
			needSendKey=1;
		}
	}else{
		keyType=1;
		if(lkey != keyStatus) keyCtl=0;//值变匿
		if(keyCtl==0){
			lkey=keyStatus;
			keyCtl=1;
			keyCnt=0;
			needSendKey=1;
		}else if(keyInArow!=0){//是否输出持续倿
			if(++keyCnt>=(1000/KEY_TIMER_TICK)){//每秒产生持续倿
				keyCnt=0;
				needSendKey=1;
			}
		}
	}
	if(needSendKey){
		if(sutApp.enableKey!=0)//延时期间不检测按锿
			keySendEvent(lkey,keyType);
	}
}
bool lcdBackLightStatus=false;
void pwrDetRead(char type){
	static char cnt=0;
	if(type==0){
		cnt++;
		if(cnt==3){
			sutApp.waitEscReleased=1;
			uISetNextStatus(UIS_MENU_SHUT_PWR);
		}
	}else{
		sutApp.waitEscReleased=0;
		cnt=0;
	}
#if 0
	if(sutUIstatus.Status == UIS_MENU_SHUT_PWR) return;//关机界面不处理

	if(type==0) return;//放开时处理
	//处理按顶部键切换UI
	uiTimeOutToStandby(1,APP_SUB_DIV_TIME);
	//处理按顶部键切换背光
	if(sutUIstatus.Status != UIS_STANDBY) return;//待机页面时才反转背光
	if(lcdBackLightStatus==false) backLightReset();
	else lcdBackLightApi(0);
#endif
}
void lcdBackLightApi(char value){
	CTL_LCD_BL(value);
	if(value==0) lcdBackLightStatus=false;
	else lcdBackLightStatus=true;
}
static void lockProcess(void){
	if(sutApp.keyLock==0){
		sutApp.keyLock=1;
		appSleepCtl(ASLEEP_GGROUP, 0);
		appSleepCtl(ASLEEP_GUSER, 0);
		uISetNextStatus(UIS_STANDBY);
	}else{
		sutApp.keyLock=0;
		sutApp.lockShow=0;
	}
}
void keyToneStart(void){
	if(newPara.KeySound==0) return;
#ifdef ENABLE_PWM_BEEP
	beepStart(TONE_NORMAL);
#else
	msgAtSend("AT+TONE\r\n");
#endif
}
void quickUiSwitch(int uistatus){
	if(true==isUiSwitchReady()) return;
	uISetNextStatus(uistatus);
	getStackStruct()->FastUiChange=1;
}
/*进入GT模式*/
static void enterGTMode(void){
#ifndef ENABLE_PWM_BEEP
	msgAtSend("AT+TONES=1\r\n");
#endif
	sutApp.gtMode=1;
	uioStatusSet(UIO_INDGT);
	paControl(true);//GT下常开喇叭
#ifdef ENABLE_PWM_BEEP
	pwmBeepStart(868,50);
	LSAPI_OSI_ThreadSleep(100);
	pwmBeepStart(500,50);
	LSAPI_OSI_ThreadSleep(100);
	pwmBeepStart(868,50);
#else
	msgAtSend("AT+TONE\r\n");
	LSAPI_OSI_ThreadSleep(200);
	msgAtSend("AT+TONE\r\n");
#endif
	MSG_WARN(1, "Enter GT Mode");
}
void micPttHandler(char status){
	keySendEvent(MKEY_VALUE_MIC_PTT,status);
}
char beepStatus=0;//只tone一次，任何键放开后，有键按下可tone
void keyHandler(unsigned short key,unsigned char status){//普通按键值处琿
static unsigned char gtModeCnt=0;
	static unsigned char lockCnt=0;
	if(newPara.lockType!=0){
		if(sutApp.keyLock!=0 && MKEY_VALUE_MENU!=key){
			sutApp.lockShow=1;
			return;
		}
	}else{
		if(sutApp.keyLock!=0 && (MKEY_VALUE_DOWN==key || MKEY_VALUE_ESC==key)){
			sutApp.lockShow=1;
			return;
		}
	}
	//MSG_INFO(1, "KEY:%d,%d", key,status);
	
	showKeyMessage(key,status);

	if(status==0){//key free
		switch(key){
			case MKEY_VALUE_MIC_PTT:
				pttHandler(0,0);
				break;
			case MKEY_VALUE_PTT:
				pttHandler(1,0);
				break;
			case MKEY_VALUE_CB_PTT:
				pttHandler(2,0);
				break;
			case MKEY_VALUE_ESC:
				pwrDetRead(1);
				break;
			case MKEY_VALUE_F1:
				if(sutApp.key_f1_cnt==1 && sutUIstatus.Status!=UIS_MENU_SYS_SERVERPASS) sutApp.voluemUpdate=1;
				sutApp.key_f1_cnt=0;
				break;
			case MKEY_VALUE_F2:
				if(sutApp.key_f2_cnt==1 && sutUIstatus.Status!=UIS_MENU_SYS_SERVERPASS) sutApp.voluemUpdate=2;
				sutApp.key_f2_cnt=0;
				break;
			case MKEY_VALUE_CB_GT:
				gtModeCnt=0;
				break;
			case MKEY_VALUE_MENU:
				if(sutApp.keyLock != 0 && lockCnt==1)//实际无法实现锁短按一下，因为按下去键值就被使用了，不过锁键盘后，都是在待机界面，不影响
					sutApp.lockShow=1;
				lockCnt=0;
				break;
			default:
				break;
		}
		sutApp.timeOutCnt=0;
		keyInArow=0;
		appSleepCtl(ASLEEP_MKEY, 0);
		beepStatus=0;
	}else{//key press
		if(key!=MKEY_VALUE_PTT && key!=MKEY_VALUE_CB_GT && beepStatus==0) keyToneStart();
		beepStatus=1;
		backLightReset();//其它所有键都点亮(接口里面有调阻止休眠接口)
		
		appSleepCtl(ASLEEP_MKEY, 1);
		keyNum++;
		switch(key){
			case MKEY_VALUE_MIC_PTT:
				pttHandler(0,1);
				break;
			case MKEY_VALUE_PTT:
				pttHandler(1,1);
				break;
			case MKEY_VALUE_CB_PTT:
				pttHandler(2,1);
				break;
			case MKEY_VALUE_ESC:
				keyInArow=1;
				pwrDetRead(0);
				break;
			case MKEY_VALUE_F1:
				keyInArow=1;
				sutApp.key_f1_cnt++;
				if(sutApp.keyLock==0){
					if(sutApp.key_f1_cnt==3) quickUiSwitch(UIS_MENU_GROUP_SEL);
				}else if(sutApp.key_f1_cnt!=1) sutApp.lockShow=1;
				break;
			case MKEY_VALUE_F2:
				keyInArow=1;
				sutApp.key_f2_cnt++;
				if(sutApp.keyLock==0){
					if(sutApp.key_f2_cnt==3) quickUiSwitch(UIS_MENU_USER_SEL);
				}else if(sutApp.key_f2_cnt!=1) sutApp.lockShow=1;
				break;
			case MKEY_VALUE_CB_GT:
				keyInArow=1;
				gtModeCnt++;
				if(sutApp.keyLock==0){
					if(gtModeCnt==3){
						if(sutApp.gtMode==0){
							enterGTMode();
						}
					}
				}else sutApp.lockShow=1;
				break;
			case MKEY_VALUE_CB_IP:
				keyInArow=1;
				break;
			case MKEY_VALUE_MENU:
				keyInArow=1;
				if(++lockCnt==3) lockProcess();
				break;
			default:
				break;
		}
	}
}

/////////////////////////////事件发送接叿//////////////////////////
void threadSendEvent(LSAPI_OSI_Thread_t *threadID, unsigned int id, unsigned int param1,unsigned int param2,unsigned int param3){
	LSAPI_OSI_Event_t pEventSend;

	pEventSend.id=id;
	pEventSend.param1=param1;
	pEventSend.param2=param2;
	pEventSend.param3=param3;
	osiEventTrySend(threadID,&pEventSend,0);
}

//////////////////////////////其它处理接口//////////////////////////
static void adcRead(unsigned int interval){
#if 1
	static unsigned char earStatus=0xff;
	unsigned char tmpEar;
	int32_t chargeVol;
	static unsigned short cnt=0,lcnt=0;
	static unsigned int laSiVbat;
	unsigned int adcValueTmp;
	if(++cnt<(1000/interval)) return;//1秒读一次ADC即可
	cnt=0;
	LSAPI_SYS_BattGetVol(&adcValueTmp);
	sutApp.g_iBAT=adcValueTmp/10;
	if(sutApp.g_iBAT == laSiVbat){
		laSiVbat=sutApp.g_iBAT;
		if(sutApp.g_iBAT<=MIN_PWR_LEVEL){
			MSG_WARN(1,"Low power:%d", lcnt++);
			if(lcnt>=10){
				MSG_INFO(1, "Low power ,shut");
				sutApp.lowPwrMsg=1;
				appSleepCtl(ASLEEP_PWR, 1);
			}
		}else lcnt=0;
	}
	//读取充电/耳机接入状态	//不知道为啥是LSAPI_Device_ADC_CHANNEL_3，而不是LSAPI_Device_ADC_CHANNEL_1
	chargeVol=LSAPI_Device_AdcGetChannelVolt(LSAPI_Device_ADC_CHANNEL_3, LSAPI_Device_ADC_SCALE_3V233);
	if(chargeVol<=800){//耳机插入,没在充电
		tmpEar=0;
		sutApp.chargeStatus=0;
	}else if(chargeVol<=1000){//耳机插入，正在充电
		tmpEar=0;
		sutApp.chargeStatus=1;
	}else if(chargeVol<=1400){//耳机拔出，没在充电
		tmpEar=1;
		sutApp.chargeStatus=0;
	}else{//耳机拔出，正在充电
		tmpEar=1;
		sutApp.chargeStatus=1;
	}
	if(tmpEar != earStatus){//耳机状态发生变化
		earStatus=tmpEar;
		tmpEar += 0x30;
		proHeadSet(&tmpEar);
	}
#else//这里ADC太频繁调用ADC接口，有概率会影响poc播放tone音效果
	#define VBAT_READ_TIME 20
	unsigned int adcValueTmp;
	static unsigned int siVbat=0,laSiVbat;
	static unsigned char index=0;
	
	LSAPI_SYS_BattGetVol(&adcValueTmp);
	siVbat += adcValueTmp;
	if(++index>=VBAT_READ_TIME){
		sutApp.g_iBAT=siVbat / VBAT_READ_TIME / 10;
		if(laSiVbat!=sutApp.g_iBAT){
			//MSG_INFO(1, "bat:%d", sutApp.g_iBAT);
			laSiVbat=sutApp.g_iBAT;
			if(sutApp.g_iBAT<=MIN_PWR_LEVEL){
				MSG_INFO(1, "Low power ,shut");
				sutApp.lowPwrMsg=1;
				appSleepCtl(ASLEEP_PWR, 1);
			}
		}
		siVbat=0;
		index=0;
	}
#endif
}
/*处理UI操作*/
static void uiProcess(unsigned int exeInterval){
	static int cnt=0;
	if(getAppObjStatus(ASLEEP_PWR) != 0) return;//关机后，不切换菜单，只显示关机
	uiLoop(exeInterval);
	uiResponse(exeInterval);
}
/*触发关机操作*/
static void pwrShutPro(void){
	static char shutFlag=0;
	
	if(getAppObjStatus(ASLEEP_PWR) == 0) return;
	lcdBackLightApi(1);
	msgAtSend("AT+POC=050000\r\n");
	msgAtSend("AT+CFUN=0\r\n");
	if(shutFlag==0){
		//显示关机界面
		if(sutApp.lowPwrMsg==0) guiShowMessageBox("正在关机");
		else guiShowMessageBox("低压关机");
		shutFlag=1;
		LSAPI_OSI_ThreadSleep(1000);
		guiShowBmp(0,0,"BYEBYE.bmp");
		LSAPI_OSI_ThreadSleep(1000);
	}
	MSG_INFO(1, "Normal PwrOff");
	//msgAtSend("AT+TRB=1\r\n");//normal power off   当前固件先不发模块关机指令，否则断电再上电有可能是起不来皿
	//LSAPI_OSI_ThreadSleep(1000);//一秒后释放电源锿防止软关机不成功
	lcdBackLightApi(0);
	MSG_INFO(1, "Release pwr");
	guiFillRect(0,0,GLCD_WIDTH-1,GLCD_HEIGHT-1,guiGetBackColor());//防止下次开机能看到残留
	msgAtSend("AT+CPOF\r\n");//软件关机模块
	LSAPI_OSI_ThreadSleep(100);
	CTL_POWER_HOLD(false);
}
static void NoteCheck(int interval){
	int dlyMs;
	if(sutApp.lowPwrWarn!=0){
		sutApp.lowPwrCnt += interval;
		if(sutPocStatus.spk==0 && sutPocStatus.mic==0){//对计状态下不播放请充电
			if(sutApp.lowPwrCnt>=WARN_TTS_INTERVAL){
				sutApp.lowPwrCnt=0;
				ttsPlay(ENCODE_USER_GBK, "C7EBB3E4B5E7");
			}
		}
	}
}
void AntModeRun(void){
#ifdef ENABLE_ANT_MODE
	guiShowMessageBox("调天线模式");
	for(;;){
		LSAPI_OSI_ThreadSleep(2000);
	}
#endif
}

static void paProCtl(void);
static void subTimerCtl(unsigned char sleep_or_not);
static void configureVoiceParam(void);
void appRun(void){
	
	char cnt=0;
	LSAPI_OSI_Event_t event={0};
	//等待lcd初始化完房
	MSG_INFO(1, "wait lcd init");
	while(sutApp.guiStatus==0){LSAPI_OSI_ThreadSleep(50);}//是否检测超时？
//	AntModeRun();
//	localAuthNow();
	
	//等待poc启动完成
	MSG_INFO(1, "lcd init done, wait poc start");
//	while(sutApp.pocInitStatus==0){
//		msgAtSend("ATE0\r\n");
//		LSAPI_OSI_ThreadSleep(1000);
//	}//是否检测超时？
	MSG_INFO(1, "app loop start");
	
    msgAtSend("AT+AUDCH=0,0\r\n");//此机型只使用主通道
	//设置一下TTS语音速度
	msgAtSend("AT+LSHTTSPARAM=3000,106,100\r\n");//设置TTS参数
	//查询一下POC版本叿
	
	msgAtSend("AT+SIMCROSS?\r\n");
	
//	configureVoiceParam();
//	adcRead(APP_SUB_DIV_TIME);//在开机播放前设置下SPK
//	splVolumeSet(newPara.spkVol*10);//更新音量
	
	backLightReset();

//	if(newPara.ttsMessage[0]!=0){   
//		if(newPara.ttsCodeType==0){
////			ttsPlay(ENCODE_USER_UNICODE_BE, newPara.ttsMessage);
//		}else if(newPara.ttsCodeType==1) ttsPlay(ENCODE_USER_GBK, newPara.ttsMessage);
//		else MSG_INFO(1, "ttsCodeType:%d not support", newPara.ttsCodeType);
//	}else MSG_INFO(1, "tts null");
//	newGuiNoteBoot(1);
//	//检测卡是否存在
//	while(sutApp.cardStatus==0){
//		msgAtSend("AT+CCID\r\n");
//		LSAPI_OSI_ThreadSleep(500);
//		if(++cnt>=10){
//			MSG_INFO(1, "Check card timeout");
//			break;
//		}
//	}

	msgAtSend("AT+POC=030000\r\n");

	
	for(;;){
		
		ledsProCtl();
		adcRead(APP_SUB_DIV_TIME);
		uiProcess(APP_SUB_DIV_TIME);

		pocProCtl(APP_SUB_DIV_TIME);
		NoteCheck(APP_SUB_DIV_TIME);
		uiTimeOutToStandby(0, APP_SUB_DIV_TIME);
		HookGroupUserInfo();
		LogoutOutTimeCheck(APP_SUB_DIV_TIME);
		if(isSleepReady()==0) LSAPI_OSI_ThreadSleep(APP_TASK_SLEEP_TIME);
	
		else if(sutApp.gtMode==0){//正常模式下可以休眿
			MSG_WARN(1, "APP SLEEP");
			uiTimeOutToStandby(1, APP_SUB_DIV_TIME);
			stopKeyTimer();
			subTimerCtl(1);//切换为休眠状态定时器
			sutApp.appStatus=1;
			redLedCtl(false);//休眠后保证灯没亮，否则有可能灯亮10ms，按理10ms后灯能灭，然后10ms时休眠了，应用就短时间内不会灭灯
			greenLedCtl(false);//休眠后保证灯没亮
			sutApp.updateStatusBar=1;
			LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &event);
			LSAPI_OSI_ThreadSleep(150);//添加这个后，休眠时按键或被呼叫或本机呼叫，tone音能是完整的
			lcdDrv_Init(1);//深度休眠唤醒后重新初始化SPI-LCD
			if(sutApp.lcdDlyLightUp){
				sutApp.lcdDlyLightUp=0;
				lcdBackLightApi(1);
			}
			sutApp.forceUiFlash=1;
			
			sutApp.appStatus=0;
			subTimerCtl(0);//切换为唤醒状态定时器
			MSG_WARN(1, "APP WAKEUP");
		}
		//检测是否关机，这里要放在唤醒后操作
		pwrShutPro();
	}
}
unsigned int subTimerInterval=100;//定时器定时的时间
LSAPI_OSI_Timer_t *pSubtimer_t = NULL;
/*
为了做低功耗，此定时器在休眠时，设置为长时间定旿
非休眠时，设置为短时间定旿
sleep_or_not:0 未休眠， else 休眠
*/
static void subTimerCtl(unsigned char sleep_or_not){
	if(NULL==pSubtimer_t){
		MSG_WARN(1, "subTimer null");
		return;
	}
	LSAPI_OSI_TimerStop(pSubtimer_t);
	//打开定时噿
	if(sleep_or_not==0) subTimerInterval=100;//未休眠时＿00ms
	else subTimerInterval=5000;//休眠旿5000ms
	LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
}
static void subTimeroutcallback(void *param){
	unsigned int *dlyTime=(unsigned int *)param;
    //处理灯的显示
  	uioProctl(*dlyTime);
  	//控制功放的关闿
  	paProCtl();
	if(NULL!=pSubtimer_t) LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
}

void subTask(void *param){
	LSAPI_OSI_Event_t event={0};
	if(NULL==pSubtimer_t) pSubtimer_t = LSAPI_OSI_TimerCreate(LSAPI_OSI_ThreadCurrent(), subTimeroutcallback, (void *)&subTimerInterval);
	if(NULL==pSubtimer_t) MSG_WARN(1,"sub timer init failed");
	else LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
	for(;;){LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &event);}
}

static void paProCtl(void){
	//会被定时调用
	if(sutPocStatus.TTS!=0) return;
	if(sutPocStatus.spk!=0) return;
	if(sutPocStatus.TONE!=0) return;
	if(sutPocStatus.beep!=0) return;
	if(sutApp.gtMode!=0) return;
	paControl(false);
	//MSG_INFO(1,"spk off");
}
void tryWakeupApp(void){
	if(sutApp.appStatus!=0){
		if(mainThreadPtr!=NULL){
			threadSendEvent(mainThreadPtr,OHPOC_EVENT_MAIN,NULL,NULL,NULL);
		}
	}                                                                                                                       
}
void ttsPlay(ENCODE_USER_ENUM type, char *tts){
	char buf[20];
	MSG_INFO(1, "tts Play:%d,%s",type,tts);
	paControl(true);
	snprintf(buf, sizeof(buf), "AT+LSHTTS=%d,\"", type);
	msgAtSend(buf);
	msgAtSend(tts);
	msgAtSend("\"\r\n");
	sutPocStatus.TTS=1;
}

/*背光时间到，熄灭*/
void backLightCb(void *param){
	if(sutPocStatus.firstLogin==0) return;//未登录过，不灭屏
	if(newPara.lcdParaList[newPara.lcdParaDefaultIndex]==0) return;//常亮
	lcdBackLightApi(0);
	appSleepCtl(ASLEEP_LCD, 0);//可以休眠
}
/*点亮背光*/
void backLightReset(void){
	unsigned short tmp;
	appSleepCtl(ASLEEP_LCD, 1);//不让休眠
	tmp=newPara.lcdParaList[newPara.lcdParaDefaultIndex];
	if(sutApp.appStatus==0) lcdBackLightApi(1);//未休眠时，直接点亮
	else sutApp.lcdDlyLightUp=1;//休眠时不马上亮亮，会在LCD初始化完后点亮
	startBackLightTimer(tmp*1000);
}
void sysPwrLock(void){
	sutApp.pwrLock=1;
}
void sysPwrRlease(void){
	sutApp.pwrLock=0;
}
//"3132" --> 0x31,0x32
void StrAsciiToHex(char *src, unsigned char *des){
	unsigned char temp[2],i;
	if(strlen(src)%2) return;
	while(0!=*src)
	{
		for(i=0;i<2;i++)
		{
			temp[i] = *src++;
			if(temp[i] >= '0' && temp[i] <= '9') temp[i] -= 0x30;
			else if(temp[i] >= 'A' && temp[i] <= 'F') temp[i] -= 0x37;
			else temp[i] -= 0x57;
		}
		temp[0] <<= 4;
		temp[0] &= 0xf0;
		*des++=temp[0]|temp[1];
	}
	*des=0;
}

void splVolumeSet(unsigned char level){
	char info[30];
	
	snprintf(info, sizeof(info), "AT+CLVL=%d\r\nAT+CRSL=%d\r\n", level,level);
	msgAtSend(info);
	MSG_INFO(1,"SPK_VOL:%d",level);
}
const unsigned char spkGainTable[SPK_GAIN_NUM];
/*调节音量，刷新音量进度条*/
void volAdjAction(char direction,unsigned char UIStatus){
	unsigned char vol;
	if(sutApp.earLev==0){//不接耳机
		if(direction==0){
			if(newPara.spkVol<MAX_SPK_VOL) newPara.spkVol++;
			else goto FLASH;
		}else{
			if(newPara.spkVol>0) newPara.spkVol--;
			else goto FLASH;
		}
		vol=newPara.spkVol*10;
		splVolumeSet(vol);
	}else{//接了耳机
		if(direction==0){
			if(newPara.spkGain<SPK_GAIN_NUM) newPara.spkGain++;
			else goto FLASH;
		}else{
			if(newPara.spkGain>0) newPara.spkGain--;
			else goto FLASH;
		}
		if(newPara.spkGain==0) vol=0;
		else vol=spkGainTable[newPara.spkGain-1];
		splVolumeSet(vol);
		vol=newPara.spkGain;
	}
	sysIniSave();
	//刷新进度条
	FLASH:
	if(sutApp.earLev==0) vol=newPara.spkVol;
	else vol=newPara.spkGain;
	//if(UIS_STANDBY==UIStatus) volUiFlash(vol);
}

void volUpdateNeed(void){
	if(sutApp.voluemUpdate==0) return;
	if(sutApp.voluemUpdate==1) volAdjAction(0, sutUIstatus.Status);
	else if(sutApp.voluemUpdate==2) volAdjAction(1, sutUIstatus.Status);
	sutApp.voluemUpdate=0;
}
const unsigned char spkGainTable[SPK_GAIN_NUM]={
	24,32,40,48,56,64,72,80
};

void VolSpkUpdate(void){
	char cmd[30];
	unsigned char volLev;
	if(sutApp.earLev==0){//耳机拔掉后，恢复正常的SPK增益
		volLev=newPara.spkVol*10;
	}else{//耳机接入，应用特定值
		if(newPara.spkGain>=SPK_GAIN_NUM) volLev=SPK_GAIN_DEFAULT;
		else volLev=newPara.spkGain;
		if(volLev>0) volLev=spkGainTable[newPara.spkGain-1];
	}
	splVolumeSet(volLev);
}
//对都使用主音频通道设计来说，耳机模式时，需要按比例降低输入输出增益
const unsigned short micGainTable[MIC_GAIN_NUM][2]={
	{2,6},{2,10},{3,10},{4,10},{5,10},{6,10},{6,13}
};

void VolMicUpdate(void){
#if 1
	char cmd[50];
	unsigned char hana,lana,hadc,ladc;
	if(sutApp.earLev==0){//耳机拔掉,恢复正常MIC增益
		hana=sutApp.mic_ana>>8;
		lana=sutApp.mic_ana;
		hadc=sutApp.mic_adc>>8;
		ladc=sutApp.mic_adc;
	}else{//耳机接入
		hana=micGainTable[newPara.micGain][0]>>8;
		lana=micGainTable[newPara.micGain][0];
		hadc=micGainTable[newPara.micGain][1]>>8;
		ladc=micGainTable[newPara.micGain][1];
	}
	snprintf(cmd, sizeof(cmd), "AT+CACCP=0,0,0,\"%02x%02x%02x%02x\"\r\n",lana,hana,ladc,hadc);
	msgAtSend(cmd);
#else	
	unsigned char tableIndex;
	char cmd[50];
	int vol=newPara.spkVol*10;
	splVolumeSet(vol);
	if(sutApp.earLev==0){//耳机拔掉,恢复正常MIC增益
		tableIndex=newPara.micGain_onspk;
		//msgAtSend("AT+CACCP=0,0,0,\"04000a00\"\r\n");
	}else{//耳机接入
		tableIndex=newPara.micGain_onear;
		//msgAtSend("AT+CACCP=0,0,0,\"02000f00\"\r\n");
	}
	if(tableIndex>=MIC_GAIN_NUM){
		MSG_WARN(1, "Index invalid:%d", tableIndex);
		return;
	}
	snprintf(cmd, sizeof(cmd), "AT+CACCP=0,0,0,\"%02x00%02x00\"\r\n", micGainTable[tableIndex][0],micGainTable[tableIndex][1]);
	msgAtSend(cmd);
#endif
}
//开机配置设定好的模块音频参数文件
#define READ_PER_SIZE 400 //每次从Bin文件读取最多400字节来发送，AT时长度翻倍
static void configureVoiceParam(void){
	//const char *confiFile="ZT-MINI101HGS.bin";
	const char *confiFile="ZT-MINI201-202HGS-20210703.bin";
	unsigned char sendbuf[40+2*400];//AT+CAIET=0,0,9600,400,""
	unsigned char *dataPtr=sendbuf+sizeof(sendbuf)-READ_PER_SIZE;
	char buf[3];
	char status=0;
	int fd,offset,readsize,i;
	LSAPI_FS_Stat_info_t pBuf;
	MSG_INFO(1, "config audio file'%s'",confiFile);
	fd=LSAPI_FS_Open(confiFile, LSAPI_FS_O_RDONLY,0x0);
	if(fd>0){
		memset(&pBuf,0,sizeof(pBuf));
		LSAPI_FS_Fstat(fd,&pBuf);
		offset=0;
		LSAPI_FS_Seek(fd, offset, LSAPI_FS_SEEK_SET);
		while(offset<pBuf.st_size){
			readsize=pBuf.st_size-offset;
			if(readsize>400) readsize=400;
			readsize=LSAPI_FS_Read(fd, dataPtr, readsize);
			if(readsize==0) break;
			else if(readsize<0){
				status=1;
				break;
			}
			sprintf(sendbuf, "AT+CAIET=0,0,%d,%d,\"", offset, readsize);
			for(i=0;i<readsize;i++){
				sprintf(buf, "%02x", dataPtr[i]);
				strcat(sendbuf, buf);
			}
			strcat(sendbuf,"\"\r\n");
			msgAtSend(sendbuf);
			offset += readsize;
			LSAPI_OSI_ThreadSleep(10);
		}
		LSAPI_FS_Close(fd);
		if(status==0) MSG_INFO(1, "config audio file succ:%d",offset);
		else MSG_ERR(1, "config audio failed %d",status);
	}else MSG_ERR(1, "'%s' open failed",confiFile);
	
	if(status==0){//配置成功后，回读一下默认的Mic，这个值在不接耳机时是固定值
		LSAPI_OSI_ThreadSleep(50);
		msgAtSend("AT+CACCP=0,0,1,\"\"\r\n");
		LSAPI_OSI_ThreadSleep(50);
	}else{
		//如果配置失败了，直接使用默认值
		sutApp.mic_ana=4;
		sutApp.mic_adc=4;//12;
	}
	VolMicUpdate();
}

//+CACCP: 
//+CACCP: "04000C00"    ana=0x0004  adc=0x000c
void proCaccpMsg(char *msg){
	char tmp[10],*pName;
	char i=0,j=0;
	if(msg[0]=='"'){
		memcpy(tmp+j, msg+7,2);j += 2;
		memcpy(tmp+j, msg+5,2);j += 2;
		memcpy(tmp+j, msg+3,2);j += 2;
		memcpy(tmp+j, msg+1,2);j += 2;
		tmp[j]=0;//000C0004
		sutApp.mic_ana=strtol(tmp+4, &pName,16);
		tmp[4]=0;
		sutApp.mic_adc=strtol(tmp, &pName,16);
	}
}