X6_LS_GWSD/app/app.c

#include "includes.h"
#include "lsapi_tts.h"
#include "osi_api.h"

//#define ANT_TEST
#define APP_IDLE_TIME 3 		//如果POC已休眿APP没有操作一定秒数后休眠
int keyNum=0;
APP_DEF sutApp;

static void appDataInit(void){
	memset((unsigned char *)&sutApp, 0, sizeof(APP_DEF));
	sutApp.pcant=4;
	sutApp.enableKey=1;
	//appSleepCtl(ASLEEP_POC, 1);
	appSleepCtl(ASLEEP_LCD, 1);
	readInfoNow();
	sysIniRead();
}

void dataInit(void){
	appDataInit();
	pocDataInit();
	gpsDataInit();
	uiDataInit();
}

static void ledsProCtl(void){
	if(sutApp.gtMode!=0) return;
	if(0==sutPocStatus.logined) uioStatusSet(UIO_INDOFFLINE);
	else if(sutPocStatus.spk>0)uioStatusSet(UIO_INDRX);
	else if(sutPocStatus.mic>0 )uioStatusSet(UIO_INDTX);
	else uioStatusSet(UIO_INDONLINE);
}

static void KeyToneDly();
static void adcRead(unsigned int interval);

char isKeyPress(void){
	if(keyNum) return keyNum--;
	else return 0;
}


/*APP休眠处理接口
ctlType, 操作对象
status,操作值，0 清除 else 设置
*/
void appSleepCtl(ASLEEP_ENUM ctlType, char status){
	if(status==0) sutApp.appSleepStatus &= ~(1<<ctlType);
	else sutApp.appSleepStatus |= 1<<ctlType;
}
/*APP休眠状态接叿*/
char isAppSleepReady(void){
	if(sutApp.appSleepStatus==0) return 1;
	else return 0;
}
/*获取指定休眠控制成员锁定的状怿
0 未锁宿否则锁定，锁定即可以休眠
*/
char getAppObjStatus(ASLEEP_ENUM ctlType){
	if(sutApp.appSleepStatus & (1<<ctlType)) return 1;
	else return 0;
}
/*检测是否APP可以休眠操作*/
char isSleepReady(void){
	static unsigned int idleCnt=0;
#ifdef DISABLE_SLEEP
	return 0;//不休眿
#endif
	if(isAppSleepReady()==0){
		idleCnt=0;
		return 0;
	}
	
	if(++idleCnt>=(APP_IDLE_TIME*1000/APP_SUB_DIV_TIME)){
		idleCnt=0;
		return 1;
	}else return 0;
}

void usbCmdHandler(const char *data,unsigned int length){
	static char buf[256];
	static int len=0;
	static char lach;
	char ch;
	int i;

	if(sutApp.authReady==0){
		authRecvPro(data, length);
		return;
	}
	
	for(i=0;i<length;i++){
		ch=data[i];
		if(len<sizeof(buf)-1) buf[len++]=ch;
		else{
			len=0;
			buf[len++]=ch;
		}
		if(lach=='\r' && ch=='\n'){
			buf[len]=0;
			cmdSetting(buf);
			len=0;
		}
		lach=ch;
	}
}

static char micPttPressed=0;
static char pttPressed=0;

static void pttHandler(char type, char ctl){
	char needSend=0;
	char mic_spk;
	if(type==0){//ptt
		if(ctl==0){//放开
			if(micPttPressed==0){
				needSend=1;mic_spk=0;
			}
			pttPressed=0;
		}else{//按下
			if(pttPressed==0 && micPttPressed==0){
				needSend=1;mic_spk=1;
			}
			pttPressed=1;
		}
	}else{//mic ptt
		if(ctl==0){//放开
			if(pttPressed==0){
				needSend=1;mic_spk=0;
			}
			micPttPressed=0;
		}else{//按下
			if(pttPressed==0 && micPttPressed==0){
				needSend=1;mic_spk=1;
			}
			micPttPressed=1;
		}
	}
	if(needSend!=0){
		if(mic_spk==0) {		
			msgAtSend("AT+POC=0C0000\r\n");
			sutPocStatus.prePtt=0;
		}
		else {
			sutPocStatus.prePtt=1;
			keyToneStart(1);	
//			//特殊处理
//			if(sutPocStatus.TTS)return;
//			sutPocStatus.beep=1;
//			MSG_INFO(1, "=========prePtt==========");
//			paControl(true);
//			if(ToneThreadPtr!=NULL)threadSendEvent(ToneThreadPtr,OHPOC_EVENT_MAIN,NULL,NULL,NULL);//0702
			//msgAtSend("AT+POC=0B0000\r\n");
	
		}
	}
}

/*打印键信恿*/
const char freeSeg[]="Free";
const char pressSeg[]="Press";
void showKeyMessage(unsigned short key,unsigned char status){
	char buf[50]="[Key_";
	//MSG_INFO(1, "key====%08x",key);
	switch(key){
		case MKEY_VALUE_F2:	strcat(buf, "F2]");break;
		case MKEY_VALUE_F1:	strcat(buf, "F1]");break;
		case MKEY_VALUE_PTT:	strcat(buf, "PTT]");break;
		case MKEY_VALUE_MENU:	strcat(buf, "MENU]");break;
		case MKEY_VALUE_UP:	strcat(buf, "UP]");break;
		case MKEY_VALUE_DOWN:	strcat(buf, "DOWN]");break;
		case MKEY_VALUE_ESC:	strcat(buf, "ESC]");break;
		case MKEY_VALUE_PWR:	strcat(buf, "PWR]");break;
		case MKEY_VALUE_CB_GT:	strcat(buf, "CB_GT]");break;
		case MKEY_VALUE_CB_IP:	strcat(buf, "CB_IP]");break;
		case MKEY_VALUE_MIC_PTT: strcat(buf, "MIC_PTT]");break;
		default:return;
	}
	if(status==0) strcat(buf, freeSeg);
	else strcat(buf, pressSeg);
	MSG_INFO(1,buf);
}
unsigned char keyInArow=0;
void keyCheck(unsigned short keyStatus){
	static unsigned short lkey=0;
	static unsigned char keyCtl=0,keyCnt=0;
	unsigned char keyType,needSendKey=0;

	if(keyStatus==KS_ALL_IDLE){
		keyType=0;
		if(keyCtl==1){
			keyCtl=0;
			needSendKey=1;
		}
	}else{
		keyType=1;
		if(lkey != keyStatus) keyCtl=0;//值变匿
		if(keyCtl==0){
			lkey=keyStatus;
			keyCtl=1;
			keyCnt=0;
			needSendKey=1;
		}else if(keyInArow!=0){//是否输出持续倿
			if(++keyCnt>=(1000/KEY_TIMER_TICK)){//每秒产生持续倿
				keyCnt=0;
				needSendKey=1;
			}
		}
	}
	
	if(needSendKey){
		if(sutApp.enableKey!=0)//延时期间不检测按锿
			keySendEvent(lkey,keyType);
	}
}
void pwrDetRead(char type){
	static char cnt=0;
	if(type==0){
		if(++cnt>=5){
			MSG_INFO(1, "Power is off!");
			appSleepCtl(ASLEEP_PWR, 1);
		}
	}else{
		cnt=0;
	}
}
static void lockProcess(void){
	if(sutApp.keyLock==0){
		sutApp.keyLock=1;
		appSleepCtl(ASLEEP_GGROUP, 0);
		appSleepCtl(ASLEEP_GUSER, 0);
		uISetNextStatus(UIS_STANDBY);
	}else{
		sutApp.keyLock=0;
		sutApp.lockShow=0;
	}
}
//key：1 跳过
void keyToneStart(char type){
	//return;
	if(newPara.KeySound==0&&type==0) return;
	if(sutPocStatus.TTS)return;
	if(type==2)sutPocStatus.beep=2;
	else sutPocStatus.beep=1;
	paControl(true);
	MSG_INFO(1, "Ptt：%d\r\n",sutPocStatus.PttFail);
	if(ToneThreadPtr!=NULL)threadSendEvent(ToneThreadPtr,OHPOC_EVENT_MAIN,NULL,NULL,NULL);//0702
}
void quickUiSwitch(int uistatus){
	uISetNextStatus(uistatus);
	getStackStruct()->FastUiChange=1;
}
/*进入GT模式*/
static void enterGTMode(void){
#ifndef ENABLE_PWM_BEEP
	msgAtSend("AT+TONES=1\r\n");
#endif
	sutApp.gtMode=1;
	uioStatusSet(UIO_INDGT);
	paControl(true);//GT下常开喇叭	
#ifdef ENABLE_PWM_BEEP
	pwmBeepStart(868,50);
	LSAPI_OSI_ThreadSleep(100);
	pwmBeepStart(500,50);
	LSAPI_OSI_ThreadSleep(100);
	pwmBeepStart(868,50);
#else
	msgAtSend("AT+TONE\r\n");
	LSAPI_OSI_ThreadSleep(200);
	msgAtSend("AT+TONE\r\n");
#endif
	MSG_WARN(1, "Enter GT Mode");
}
void micPttHandler(char status){
	keySendEvent(MKEY_VALUE_MIC_PTT,status);
}


void keyHandler(unsigned short key,unsigned char status){//普通按键值处琿
static unsigned char gtModeCnt=0;
	static unsigned char lockCnt=0;
	if(sutApp.keyLock!=0 && MKEY_VALUE_ESC!=key){
		sutApp.lockShow=1;
		return;
	}
	showKeyMessage(key,status);
	if(status==0){//key free
		switch(key){
			case MKEY_VALUE_MIC_PTT:
				pttHandler(0,0);
				break;
			case MKEY_VALUE_PTT:
				pttHandler(1,0);
				break;
			case MKEY_VALUE_PWR:
				//pwrDetRead(1);
				break;
			case MKEY_VALUE_ESC:
				//sutApp.LightStatus=1;
				pwrDetRead(1);
				lockCnt=0;
				if(sutUIstatus.Status==UIS_STANDBY){
					if(sutApp.LightStatus==0){
						if(!sutApp.cardStatus)return;
						if(lockCnt>1)return;
						if(sutPocStatus.danHuStatus)return;
						if(sutApp.MenuToStandby){
							sutApp.MenuToStandby=0;
							return;
						}
						startBackLightTimer(100);
						sutApp.LightStatus=1;
					}else {
						tryWakeupApp();
						backLightReset();
						sutApp.LightStatus=0;
					}
				}	
				break;
			case MKEY_VALUE_F1:
				if(sutApp.key_f1_cnt==1 && sutUIstatus.Status!=UIS_MENU_SYS_SERVERPASS) sutApp.voluemUpdate=1;
				sutApp.key_f1_cnt=0;
				break;	
			case MKEY_VALUE_F2:
				if(sutApp.key_f2_cnt==1 && sutUIstatus.Status!=UIS_MENU_SYS_SERVERPASS) sutApp.voluemUpdate=2;
				sutApp.key_f2_cnt=0;
				break;
			case MKEY_VALUE_CB_GT:
				gtModeCnt=0;
				
				break;
			default:
				break;
		}
		keyInArow=0;
		appSleepCtl(ASLEEP_MKEY, 0);
	}else{//key press
		//if(key!=MKEY_VALUE_PTT && key!=MKEY_VALUE_CB_GT&&key!=MKEY_VALUE_MIC_PTT) keyToneStart();
		if(key!=MKEY_VALUE_PTT && key!=MKEY_VALUE_CB_GT&&key!=MKEY_VALUE_MIC_PTT) keyToneStart(0);
		backLightReset();
		appSleepCtl(ASLEEP_MKEY, 1);
		keyNum++;
		switch(key){
			case MKEY_VALUE_MIC_PTT:
				pttHandler(0,1);
				break;
			case MKEY_VALUE_PTT:
				pttHandler(1,1);
				break;
			case MKEY_VALUE_PWR:
				keyInArow=1;
				//pwrDetRead(0);
				break;
			case MKEY_VALUE_ESC:
				keyInArow=1;
				lockCnt++;
				if(lockCnt==3){
				keyToneStart(0);
//					lockProcess(); //舍弃加锁功能
				} 
				pwrDetRead(0);
				break;
			case MKEY_VALUE_F1:
				//sutApp.key_f1_cnt++;
				keyInArow=1;
				if(++sutApp.key_f1_cnt==3) quickUiSwitch(UIS_MENU_INFO_SEL);
				break;
			case MKEY_VALUE_F2:
				keyInArow=1;
				if(++sutApp.key_f2_cnt==3) quickUiSwitch(UIS_MENU_SYS_SIM);
				break;
			case MKEY_VALUE_CB_GT:
				keyInArow=1;
				if(++gtModeCnt==3){
					if(sutApp.gtMode==0){
						enterGTMode();
					}
				}
				break;
			case MKEY_VALUE_CB_IP:
				keyInArow=1;
				break;
			default:
				break;
		}
	}
}

/////////////////////////////事件发送接叿//////////////////////////
void threadSendEvent(LSAPI_OSI_Thread_t *threadID, unsigned int id, unsigned int param1,unsigned int param2,unsigned int param3){
	LSAPI_OSI_Event_t pEventSend;

	pEventSend.id=id;
	pEventSend.param1=param1;
	pEventSend.param2=param2;
	pEventSend.param3=param3;
	osiEventTrySend(threadID,&pEventSend,0);
}

//////////////////////////////其它处理接口//////////////////////////
static void adcRead(unsigned int interval){

	static unsigned int siVbat=0,laSiVbat;
	static unsigned char MIC_ptt=0;
	static unsigned char LastMIC_ptt=0;
	static unsigned short cnt=0,lcnt=0;
	unsigned int adcValueTmp;

	if(++cnt<(1000/interval)) return;//1秒读一次ADC即可

	cnt=0;
	LSAPI_SYS_BattGetVol(&adcValueTmp);


	//MSG_WARN(1,"Low power:%d mv",adcValueTmp/10 );
	if(sutApp.g_iBAT<=MIN_PWR_LEVEL){
		MSG_WARN(1,"Low power:%d", lcnt++);
		if(lcnt>=10){
			MSG_INFO(1, "Low power ,shut");
			sutApp.lowPwrMsg=1;
			appSleepCtl(ASLEEP_PWR, 1);
		  }
	 }else lcnt=0;

	sutApp.g_iBAT=adcValueTmp/10;
		if(sutApp.g_iBAT != laSiVbat){
			laSiVbat=sutApp.g_iBAT;
	 }

	
/* ***************EAR PTTdet ADC**************************/
	//通道3   范围3V
	if(LSAPI_Device_AdcGetChannelVolt(3,3)<1000)MIC_ptt=1;
	else MIC_ptt=0;
	if(LastMIC_ptt!=MIC_ptt){
		if(MIC_ptt==1)micPttHandler(1);
		else micPttHandler(0);
		LastMIC_ptt=MIC_ptt;
	}
	
	//MSG_WARN(1,"Low power:%d mv", LSAPI_Device_AdcGetChannelVolt(3,3));

/******************************判断TTS 是否结束************************************************/
	
	if(false==LSAPI_TTS_IsPlaying())sutPocStatus.TTS=0;

	
 /**********************应用播放TONE2秒后关闭喇叭************************************/
	KeyToneDly();
		
}

/*处理UI操作*/
static void uiProcess(unsigned int exeInterval){
	if(getAppObjStatus(ASLEEP_PWR) != 0) return;//关机后，不切换菜单，只显示关机页靿
	uiLoop(exeInterval);
	uiResponse(exeInterval);
}

/*触发关机操作*/
static void pwrShutPro(void){
	static char shutFlag=0;
	
	if(getAppObjStatus(ASLEEP_PWR) == 0) return;
	CTL_LCD_BL(1);
	//msgAtSend("AT+POC=050000\r\n");
	msgToModem("AT+CFUN=0\r\n");
	if(shutFlag==0){
		//显示关机界面
		if(sutApp.lowPwrMsg==0){
			guiShowMessageBox("正在关机");
		}else guiShowMessageBox("低压关机");
		shutFlag=1;
		LSAPI_OSI_ThreadSleep(1000);
	}
	
	MSG_INFO(1, "Normal PwrOff");
	//msgAtSend("AT+TRB=1\r\n");//normal power off   当前固件先不发模块关机指令，否则断电再上电有可能是起不来皿
	//LSAPI_OSI_ThreadSleep(1000);//一秒后释放电源锿防止软关机不成功
	CTL_LCD_BL(0);
	MSG_INFO(1, "Release pwr");
	guiFillRect(0,0,GLCD_WIDTH-1,GLCD_HEIGHT-1,guiGetBackColor());//防止下次开机能看到残留
	CTL_POWER_HOLD(0);
	msgToModem("AT+CPOF\r\n");//软件关机模块
	LSAPI_OSI_ThreadSleep(100);
}
static void NoteCheck(int interval){
	int dlyMs;
	const char *lowVbat="E8AFB7E58585E794B5";
	char ttsbuf[40];

	StrAsciiToHex(lowVbat,ttsbuf);
	if(sutApp.lowPwrWarn!=0){
		sutApp.lowPwrCnt += interval;
		if(sutApp.lowPwrCnt>=WARN_TTS_INTERVAL){
			sutApp.lowPwrCnt=0;
			//broad_play_tts(ttsbuf,true);
		}
	}
}
void AntModeRun(void){
#ifdef ENABLE_ANT_MODE
	guiShowMessageBox("调天线模式");
	for(;;){
		LSAPI_OSI_ThreadSleep(2000);
	}
#endif
}

static void paProCtl(void);
static void subTimerCtl(unsigned char sleep_or_not);
static void startPocLogin(void){
	if(sutApp.startPoc==0) return;
	MSG_INFO(1, "Start poc");
	sutApp.startPoc=0;
	msgAtSend("AT+POC=0000000001\r\n");//打开对讲，关闭POC播放TTS       			    //msgAtSend("AT+POC=0000000101\r\n");	
}


void pocSetDomain(void){//设置域名前缀
//	const char platform[]="platform2";
//	const char pFormatMark[]="chn-gwsd-";
	
	char info[100]="AT+POC=120000";
	char tbuf[50];
	
	char* platform=0;
	char* pFormatMark=0;
	
	platform=sutApp.UserInfo.platform;
	pFormatMark=sutApp.UserInfo.pFormatMark;
	
	snprintf(tbuf, sizeof(tbuf), "%s,%s", platform,pFormatMark);
	AscStrTurnHexStr(tbuf, info+strlen(info));
	strcat(info, "00\r\n");
	msgAtSend(info);
	MSG_INFO(0, "**%s",info);
}
void ShouHuProcess(int interva) 
{
	static char nRet=0;
	static char regcnt=0;
	//static int LastAtt_state=0;
	int  tmepAtt_state=0;
	static int cnt=0;
	if(sutApp.gtMode!=0)return;
	if(++cnt<(1000/interva)) return;
	cnt=0;	
	nRet=LSAPI_NET_GetGprsAttState(&tmepAtt_state);

	if(nRet!=0){
		MSG_WARN(1,"Get REG status failed");
		return;
	}
	if(tmepAtt_state!=1){
  		//if(LastAtt_state!=tmepAtt_state)MSG_WARN(1,"REG off");
		if(regcnt==60){	
			
			MSG_WARN(1,"!!!!CFUN=0");
			msgAtSend("AT+CFUN=0\r\n");
			backLightReset();
			sutPocStatus.firstLogin=0;
		}else if(regcnt>=61){

			MSG_WARN(1,"!!!!CFUN=1");
			msgAtSend("AT+CFUN=1\r\n");
			regcnt=0;
		}
		++regcnt;	
	}else {
		regcnt=0;
	}
}

#define APP_NEED_SLEEP OSI_MAKE_TAG('S', 'E', 'L', 'P')



void ls_suspend(void *ctx, osiSuspendMode_t mode)
{
  MSG_INFO(1,"\n\r ls_suspend mode:%d\n",mode);
}

void ls_resume(void *ctx, osiSuspendMode_t mode, uint32_t source)
{
  MSG_INFO(1,"\n\r ls_resume mode:%d,source:%d\n",mode,source); 
}



osiPmSourceOps_t sleep_ops = 
{
    ls_suspend,
    ls_resume,
    NULL,
    NULL
};


void appRun(void){
	char cnt=0;
	char  printfbuf[20]={0};
	LSAPI_OSI_Event_t event={0};
	osiPmSource_t*App_osiPmSource_t=NULL;

	App_osiPmSource_t=osiPmSourceCreate(APP_NEED_SLEEP, &sleep_ops, NULL);
	osiPmWakeLock(App_osiPmSource_t); //拿住资源不让系统休眠
	
	//等待lcd初始化完房
	MSG_INFO(1, "wait lcd init");
	while(sutApp.guiStatus==0){LSAPI_OSI_ThreadSleep(50);}//是否检测超时？
	AntModeRun();
	localAuthNow();

	
	while(sutApp.pocInitStatus==0){
		msgAtSend("AT+POC=version\r\n");//发指令后等待POC启动
		LSAPI_OSI_ThreadSleep(1000); 
	}//是否检测超时？

	msgToModem("AT+SIMCROSS?\r\n");
	adcRead(APP_SUB_DIV_TIME);//在开机播放前设置下SPK
	backLightReset();
	//LSAPI_TTS_Play
	msgToModem("ATI\r\n");

	while(sutApp.Get_MicLv==0){
	 msgToModem("AT+CACCP=0,0,1,\"\"\r\n");
		LSAPI_OSI_ThreadSleep(1000);
		if(++cnt>=5){
			MSG_INFO(1, "get MicLv timeout");
			break;
		}
	}

	msgToModem("AT+GMR\r\n");//查询模块版本

	while(sutApp.pocParaDone==0){
			msgAtSend("AT+POC=020000\r\n");
			LSAPI_OSI_ThreadSleep(1000);
			if(++cnt>=5){
				MSG_INFO(1, "read pocPara erro");
				break;
			}
	}
	pwrModeSetCmd(newPara.pwrMode);//设置功耗模式
	voiceModeSet(newPara.voiceSel);//设置音质
	
	while(sutApp.startPoc==1){
		LSAPI_OSI_ThreadSleep(1000);
		startPocLogin();
	}

	while(sutApp.cardStatus==0){	
		//msgToModem("AT+CCID\r\n");
		msgToModem("AT+CPIN?\r\n");
		LSAPI_OSI_ThreadSleep(1000);
		if(++cnt>=10){
			MSG_INFO(1, "Check card timeout");
			if(newPara.ChangeCard==0){
				MSG_INFO(1, "REsel card ");
				newPara.ChangeCard=1;
				snprintf(printfbuf, sizeof(printfbuf), "AT+SIMCROSS=%d\r\n",sutApp.simSel);
				msgToModem(printfbuf);
				MSG_INFO(1, printfbuf);
				guiShowMessageBox("正在切卡");
				sysIniSave();
				LSAPI_OSI_ThreadSleep(1000);
				msgToModem("AT+TRB\r\n");
				LSAPI_OSI_ThreadSleep(1000);
				while(1);
			}
			break;
		}
	}
	newPara.ChangeCard=0;
	sysIniSave();
	
	//msgAtSend("AT+POC=7B00000064\r\n");
	msgToModem("ATE0\r\n");
	msgToModem("AT+AUDCH=0,0\r\n");//TEST  因为模块默认 通道为2,0
	pocSetDomain();
	//msgAtSend("AT+POC=0000000101\r\n");
	//osiPmWakeUnlock(App_osiPmSource_t); 

for(;;){
//		MS5700_Networking(APP_SUB_DIV_TIME); //网络监测
//		Domain_Process(APP_SUB_DIV_TIME);   //
//		FOTA_Process(APP_SUB_DIV_TIME);
		volUpdateNeed();
		ledsProCtl();
		adcRead(APP_SUB_DIV_TIME);
		uiProcess(APP_SUB_DIV_TIME);
		if(GPS_HADRENABLE==1){
			gpsProCtl(APP_SUB_DIV_TIME);
			GpsInternalChange(APP_SUB_DIV_TIME);
		}
	#ifndef ANT_TEST
		pocProCtl(APP_SUB_DIV_TIME);
	#endif
		NoteCheck(APP_SUB_DIV_TIME);
		//GpsInternalChange(APP_SUB_DIV_TIME);
		ShouHuProcess(APP_SUB_DIV_TIME);
		//HookGroupUserInfo();
		HookVolToutCheck();
		//IncomingSMS();
		if(isSleepReady()==0) LSAPI_OSI_ThreadSleep(APP_TASK_SLEEP_TIME);
		else if(sutApp.gtMode==0){//正常模式下可以休眿
			MSG_WARN(1, "APP SLEEP");
			stopKeyTimer();
			subTimerCtl(1);//切换为休眠状态定时器
			sutApp.appStatus=1;
			redLedCtl(false);//休眠后保证灯没亮，否则有可能灯亮10ms，按理10ms后灯能灭，然后10ms时休眠了，应用就短时间内不会灭灯
			greenLedCtl(false);//休眠后保证灯没亮
			LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &event);
			lcdDrv_Init(1);//深度休眠唤醒后重新初始化SPI-LCD
			if(sutApp.lcdDlyLightUp){
				sutApp.lcdDlyLightUp=0;
				CTL_LCD_BL(1);
			}
			sutApp.forceUiFlash=1;
			sutApp.appStatus=0;
			subTimerCtl(0);//切换为唤醒状态定时器
			MSG_WARN(1, "APP WAKEUP");
		}
		//检测是否关机，这里要放在唤醒后操作
		pwrShutPro();
	}
	
}

unsigned int subTimerInterval=100;//定时器定时的时间
LSAPI_OSI_Timer_t *pSubtimer_t = NULL;
/*
为了做低功耗，此定时器在休眠时，设置为长时间定旿
非休眠时，设置为短时间定旿
sleep_or_not:0 未休眠， else 休眠
*/
static void subTimerCtl(unsigned char sleep_or_not){
	if(NULL==pSubtimer_t){
		MSG_WARN(1, "subTimer null");
		return;
	}
	LSAPI_OSI_TimerStop(pSubtimer_t);
	//打开定时噿
	if(sleep_or_not==0) subTimerInterval=100;//未休眠时＿00ms
	else subTimerInterval=5000;//休眠旿5000ms
	LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
}
static void subTimeroutcallback(void *param){
	unsigned int *dlyTime=(unsigned int *)param;
    //处理灯的显示
  	uioProctl(*dlyTime);
  	//控制功放的关闿
  	paProCtl();
	if(NULL!=pSubtimer_t) LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
}

void subTask(void *param){
	LSAPI_OSI_Event_t event={0};
	if(NULL==pSubtimer_t) pSubtimer_t = LSAPI_OSI_TimerCreate(LSAPI_OSI_ThreadCurrent(), subTimeroutcallback, (void *)&subTimerInterval);
	if(NULL==pSubtimer_t) MSG_WARN(1,"sub timer init failed");
	else LSAPI_OSI_TimerStart(pSubtimer_t,subTimerInterval);
	for(;;){LSAPI_OSI_EventWait(LSAPI_OSI_ThreadCurrent(), &event);}
	
	
}

static void paProCtl(void){
	//会被定时调用	
	if(sutPocStatus.TTS!=0) return;
	if(sutPocStatus.spk!=0) return;
	if(sutPocStatus.TONE!=0) return;
	if(sutPocStatus.beep!=0) return;
	if(sutApp.gtMode!=0) return;
	paControl(false); //测试版本
	//MSG_INFO(1,"spk off");
}
void tryWakeupApp(void){
	if(sutApp.appStatus!=0){
		if(mainThreadPtr!=NULL){
			threadSendEvent(mainThreadPtr,OHPOC_EVENT_MAIN,NULL,NULL,NULL);
		}
	}                                                                                                                       
}
void ttsPlay(ENCODE_USER_ENUM type, char *tts){
		int len,i;
		char ttsMessage[20*4];
		char Playbuf[100]={0};
		unsigned char codeType=ENCODE_USER_GBK;
		if(newPara.ttsMessage[0]==0) return;
		len=strlen(newPara.ttsMessage);
		len = len+(8-len%8);//
		MSG_INFO(1,"tts->");
		if(type==ENCODE_USER_UNICODE_BE) 
		{
			codeType=LSAPI_TTS_UNICODE_BIG;
			for(i=0;i<len;i+=4){	
				ttsMessage[i]=newPara.ttsMessage[i];
				ttsMessage[i+1]=newPara.ttsMessage[i+1];
				ttsMessage[i+2]=newPara.ttsMessage[i+2];
				ttsMessage[i+3]=newPara.ttsMessage[i+3];

				MSG_INFO(0,"%c",ttsMessage[i]);
				MSG_INFO(0,"%c",ttsMessage[i+1]);
				MSG_INFO(0,"%c",ttsMessage[i+2]);
				MSG_INFO(0,"%c",ttsMessage[i+3]);
				
			}
			ttsMessage[len-1]=0;
			StrAsciiToHex(ttsMessage,Playbuf);
			//MSG_INFO(1,"");
		}else if(type==ENCODE_USER_GBK) {
			codeType=LSAPI_TTS_GBK;
			//StrAsciiToHex(newPara.ttsMessage,Playbuf);
			StrAsciiToHex(tts,Playbuf);
			MSG_INFO(1, "tts Play:%d,%s",codeType,tts);
		}else if(type==ENCODE_USER_ASCII){
			codeType=LSAPI_TTS_GBK;
			strncpy(Playbuf, tts, strlen(tts));
		}
	paControl(true);
	sutPocStatus.TTS=1;	
	// OEM_TTS_Spk(int type, char * atxt);
	LSAPI_TTS_Play(Playbuf,strlen(Playbuf),codeType);
}

/*背光时间到，熄灭*/
void backLightCb(void *param){
	if(sutPocStatus.firstLogin==0) return;//未登录过，不灭屏
	if(newPara.lcdParaList[newPara.lcdParaDefaultIndex]==0) return;//常亮
	CTL_LCD_BL(0);
	sutApp.LightStatus=1;
	appSleepCtl(ASLEEP_LCD, 0);//可以休眠
	//osiPmWakeLock(App_osiPmSource_t);
	
}
/*点亮背光*/
void backLightReset(void){
	unsigned short tmp;
	appSleepCtl(ASLEEP_LCD, 1);//不让休眠
	tmp=newPara.lcdParaList[newPara.lcdParaDefaultIndex];
	if(sutApp.appStatus==0) CTL_LCD_BL(1);//未休眠时，直接点亮
	else sutApp.lcdDlyLightUp=1;//休眠时不马上亮亮，会在LCD初始化完后点亮
	startBackLightTimer(tmp*1000);
}
void sysPwrLock(void){
	sutApp.pwrLock=1;
}
void sysPwrRlease(void){
	sutApp.pwrLock=0;
}
//"3132" --> 0x31,0x32
void StrAsciiToHex(char *src, unsigned char *des){
	unsigned char temp[2],i;
	if(strlen(src)%2) return;
	while(0!=*src)
	{
		for(i=0;i<2;i++)
		{
			temp[i] = *src++;
			if(temp[i] >= '0' && temp[i] <= '9') temp[i] -= 0x30;
			else if(temp[i] >= 'A' && temp[i] <= 'F') temp[i] -= 0x37;
			else temp[i] -= 0x57;
		}
		temp[0] <<= 4;
		temp[0] &= 0xf0;
		*des++=temp[0]|temp[1];
	}
	*des=0;
}

void splVolumeSet(unsigned char level){
	char info[30];

	#ifdef ANT_TEST
	return;
	#endif
	
//	memset(info, 0, sizeof(info));
	snprintf(info, sizeof(info), "AT+CLVL=%d\r\n", level);	
	msgToModem(info);
	snprintf(info, sizeof(info), "AT+CRSL=%d\r\n", level);	
	msgToModem(info);
////	broad_set_vol(BND_VOICE, level/10);
//	broad_set_vol(BND_TTS, level/12);//10
//	broad_set_vol(BND_TONE, level/12);	
	//MSG_INFO(1,"#############################################");
}
/*调节音量，刷新音量进度条*/
/*调节音量，刷新音量进度条*/


void volAdjAction(char direction,unsigned char UIStatus){
	int vol;
	#ifdef ANT_TEST
		return;
	#endif	
	if(direction==0){
		if(newPara.spkVol<MAX_SPK_VOL) newPara.spkVol++;
		else goto FLASH;
	}else{
		if(newPara.spkVol>0) newPara.spkVol--;
		else goto FLASH;
	}
	
	splVolumeSet(newPara.spkVol*10);
	MSG_INFO(1,"SPK_VOL:%d",newPara.spkVol*10);
//	vol=broad_get_vol(BND_VOICE);
//	MSG_INFO(1,"voice_VO1L:%d",vol);
//	vol=broad_get_vol(BND_TTS);
//	MSG_INFO(1,"tts_VOL2:%d",vol);
//	vol=broad_get_vol(BND_TONE);
//	MSG_INFO(1,"tone_VOL3:%d",vol);
	sysIniSave();
	//刷新进度条
	FLASH:
	if(UIS_STANDBY==UIStatus)volUiFlash(newPara.spkVol);
	
}


void volUpdateNeed(void){
	if(sutApp.voluemUpdate==0) return;
	if(sutApp.voluemUpdate==1) volAdjAction(0, sutUIstatus.Status);
	else if(sutApp.voluemUpdate==2) volAdjAction(1, sutUIstatus.Status);
	sutApp.voluemUpdate=0;
}
/*
//对都使用主音频通道设计来说，耳机模式时，需要按比例降低输入输出增益
unsigned char micGainTable[MIC_GAIN_NUM][2]={
	{3,10},{4,2},{4,10},{5,2},{5,10},{6,2},{6,10}
};
void VolMicUpdate(void){
	unsigned char tableIndex;
	char cmd[50];
	int vol=newPara.spkVol*10;
	splVolumeSet(vol);
	if(sutApp.earLev==0){//耳机拔掉,恢复正常MIC增益
		tableIndex=newPara.micGain_onspk;
		//msgAtSend("AT+CACCP=0,0,0,\"04000a00\"\r\n");
	}else{//耳机接入
		tableIndex=newPara.micGain_onear;
		//msgAtSend("AT+CACCP=0,0,0,\"02000f00\"\r\n");
	}
	if(tableIndex>=MIC_GAIN_NUM){
		MSG_WARN(1, "Index invalid:%d", tableIndex);
		return;
	}
	snprintf(cmd, sizeof(cmd), "AT+CACCP=0,0,0,\"%02x00%02x00\"\r\n", micGainTable[tableIndex][0],micGainTable[tableIndex][1]);
	msgAtSend(cmd);
}

*/

 static void KeyToneDly()
{
	static unsigned char Cnt=0;
	if(sutPocStatus.beep){
		if(++Cnt>1){
			Cnt=0;
			sutPocStatus.beep=0;
		}
	}else Cnt=0;
}